Repository navigation
Am MOD r30a
Am MOD r30a
The first release with the mixer, the input channel, resampling through the mixer and the tuner. Firmware 1.3.0.12 only.
Read this first
- The "SD Card Access" item is hidden in the Project menu (Shift+Pad 16) in both modes. USB transfer mode ("the card as a drive on your computer") cannot work while the mod runs: the app runs in an isolated copy without access to raw storage devices, and the card is in use by the mod. The item was removed for safety. Use a card reader; to get USB mode back, remove
autorun/from the card and start the MPC. - Two modes: Stock and Am MOD. Project → Mod Settings → Quick → FX mode, applied after a restart. Stock: the stock FX Select (one effect), no mixer. Am MOD: the mixer replaces FX Select; Knob FX opens the mixer; a stock FX Select effect saved in a project is ignored. Signal-path diagrams for both modes (EN/RU) are in the README.
- Back up projects and samples before updating. Save to External.
What is new
- Mixer: tracks A–H and Master, four insert effects per track, sends, sidechain, Song stems to the SD card.
- Input channel (mixer pad 15): Level, Pan, Mute, Input FX; recording point Input / Track A–H / Master, Wet / Dry; monitoring follows the record point; Rear modes.
- Resample a pad (Shift+Pad 11 in Sample) or a sequence (Shift+Pad 11 in Seq) through the mixer, with a destination dialog, Replace confirmation, stop confirmation and independent bank handling.
- Tuner: input (mixer Input ROUTE, Sample Record B3) and the sample of any pad (Stop+Chop in Sample); B3 "Orig note" stores the original note.
- Pad colour from Track on every screen with pad sounds.
- New illustrated effect screens, typing names with the pads, Master compressor OptoCat/Duck.
Bugs fixed
- Save Project / Save Sample: false "Insert SD card" and saving to Internal.
- Stems export with an External Export window; the Stems name window now accepts pads at once.
- Resampled pad lost its attack; sequence resample skipped the mixer and could be silent at first start.
- Recording through Track or Master stayed dry.
- A stock FX Select effect sounded in Am MOD; one selected pad made Knob FX hit every pad.
- Pad colours turned stock under native dialogs.
- Resample dialog: Pad Bank stepping, bank letters, stop confirmation, Replace prompt with red target and hint (sequences), destination bank independent of the sequence bank.
- Compressor pad pick showed free-green / occupied-red like a destination: now a normal blinking selection.
- Seq+Sample window lit pads differently from Sample: now the same rules.
- Shift+Erase in the mixer started the stock copy gesture; K3 Volume in the sample library blinked; Master FX pinned Sample Comp row.
Known
- Rare short crackle in the tuner window on very low notes.
- A missing sequence cursor in Song was seen once and could not be reproduced.
Thanks
Huge thanks to Leusha for careful, detailed testing and for finding bugs: most of the fixes above started from those reports. Thanks also to mxt1iga and everyone who tested builds.