A screw terminal PCB for esp32 devkit
Measures 2.30' x 3.60'
I used easyEDA to design it and ordered them through jlcpcb
FRONT
BACK
| Item | Quantity |
|---|---|
| esp32 Devkit V1 | 1 |
| Screw Terminal PCB | 1 |
| 5mm Pitch Screw Terminal (I used 3 pin blocks) | varies |
| 15 pin Female Headers (Optional) | 2 |
| Soldering Iron | 1 |
| Solder | 1 |
Super easy.
- Solder the esp32 to the board. (Or attach the female headers to the esp32 and then solder those to the board.)
- Connect the screw terminals to eachother if needed.
- Solder screw terminals to the board with the openings facing out.