Repository navigation
DecLAB 0.4.0: Pluto, HydraSDR, P25 phase 2, trunked calls
Two more radios, P25 phase 2, and trunked calls followed by themselves.
New
- ADALM-PLUTO and Pluto+. Pick ADALM-PLUTO / Pluto+ as the source, or use
--radio plutoon the command line.- Pure Rust: the driver speaks the Pluto's own IIOD protocol, with no libiio and no DLLs.
- Links:
autouses USB if ADI's Pluto USB driver is installed, and otherwise the Pluto's USB network at 192.168.2.1. Useip:ADDRESSfor a Pluto+ on Ethernet. - Settings: rate from 1 to 20 MS/s, gain in dB or AGC.
- Tested on a real Pluto (AD9364, ADI firmware v0.39) over USB and its network.
- Lost samples: a Pluto's USB carries about 7 MS/s of 16-bit IQ. If the rate is higher, the samples the link drops are counted and shown beside the radio's status.
- Tezuka firmware: F5OEO's Tezuka sends 8-bit IQ, which is used automatically and halves the load. This has not yet been tried on hardware.
- Receive only: the transmit LO is powered down.
- HydraSDR RFOne on the Airspy driver (Airspy R2 / HydraSDR, or
--radio hydrasdr). Tested live. - P25 phase 2 (TDMA traffic channels) in Digital voice, as a sixth mode.
- Display: both slots on the card, a heard list, and one slot played at a time.
- Scrambling: the seed is solved from one clean scrambled burst.
- Simulated sensitivity: 83 % of voice frames at 8 dB C/N, 97 % at 10 dB.
- Trunked calls followed. A P25 control channel's grants now open a VFO for each call inside the radio's span.
- Speaker: followers share one speaker, and the first to talk keeps it.
- Closing: a follower closes 4 s after its call ends.
- Phase 2 calls descramble at once, using the system's IDs from the control channel.
- Switch: "follow calls" in the VFO rail turns it on or off.
Download
DecLAB-0.4.0-windows-x64.zip: declab-gui.exe and declab.exe (command line), for 64-bit Windows 10/11, with nothing to install.