Repository navigation
QIP Inspection
![]()
This screen allows for the QIP inspection to be performed and and related information to be recorded.
When opening a trolley from the Trolleys for Invoice screen, the app checks whether the trolley contains frozen or chill items. If it does, it checks whether the QIP process for the category of items (frozen/chill) has been completed. If the QIP for that given category of items has not been completed, this QIP screen is opened allowing the operator to perform the QIP inspection before continuing with the delivery of the items i.e. before opening the Items for Trolley screen. QIP Inspection and process is exactly the same for both frozen and chill items. The only difference is in the title of the screen being shown and the items being worked with as sample during the inspection.
N.B. since we do not know the order in which trolleys are being offloaded from the delivery vehicle, there may be cases where the operator prefers to postpone the QIP inspection when reaching another trolley, or perhaps at the end of the delivery process. For this reason, the operator is not forced into completing the QIP Inspection at this stage i.e. the operator can click the Save button to continue without entering any QIP details on this screen. In such a scenario, this screen will continue to be shown every time the operator opens another trolley of this category (frozen/chill) for as long as the QIP Inspection has not been completed. Once the QIP process for the category (chill/frozen) has been completed, the screen will no longer be shown. If the operator completed the delivery of all trolleys of the given category and has still not completed the QIP Inspection, then this screen will be shown before allowing the receiver's signature to be captured. At that stage, the operator will have no choice but to complete the QIP Inspection in order to continue with the signature capture
The following information needs to be captured by the operator:
-
Sample Items:
- Item Number: two sample items of the given category (frozen/chill) need to selected from the invoice. These serve as sample items on which the operator is performing the temperature check. An item can be selected by clicking on the Item text box which will open a screen showing all the items of that category (frozen/chill) in the trolley. The operator can select any item by clicking on the row. After selecting the item, the app will return back to this QIP Inspection screen and populate the Item text box with the Item Number of the item selected.
- Temperature: after selecting the item, the operator is required to measure the temperature of the item with their own thermometer. Thereafter the temperature needs to be entered into the item's Temperature field.
- Accept: based on the temperature recorded, the operator must indicate whether the item is accepted or rejected by the receiver. This can be done by selecting either the Accept or Reject radio button alongside the item that is being inspected.
-
Category Status: at the bottom of the screen the operator is required to indicate whether the receiver is accepting, rejecting or partially accepting the items of the category being inspected (frozen/chill). The following radio button options are available:
- Accept: the option should only be selected if the receiver accepts all of the items of the given category (frozen/chill) on the invoice.
- Reject: this option should only be selected if the receiver rejects all of the items of the given category (frozen/chill) on the invoice. When rejecting, an additional text box appears that requires the operator to enter a reason for the rejection. The operator cannot continue without providing a reason.
- Partial Accept: the receiver could reject a single item due to its temperature being too low (failing QIP test), but may accept the rest of the frozen/chill items. The Partially Accepted option should be selected in such a scenario.
- Save: the operator can press the Save button to save the details that have been entered on the screen related to the QIP Inspection. After the details have been saved, the app will continue to the Items for Trolley allowing thee driver to enter details about the quantities delivered for each item in the trolley.
The screenshot below shows the QIP Inspection screen when opening the first chill trolley on an invoice, requiring the operator to perform the QIP inspection for chill items on the invoice.

The screenshot below shows the item by category selection screen that is opened when clicking the Item text box on the QIP Inspection screen. As mentioned above, this screen shows all of the chill items on the current trolley being worked on. The operator is required to select an item by clicking on its row in the list. After selecting the item, the app will return back to this QIP Inspection screen and populate the Item text box with the Item Number of the item selected.

The screenshot below shows the QIP Inspection screen after all field have been completed. In this case the all of the frozen items for the invoice have been rejected. In order to continue with the rejection, a reason is also provided.

Digistics Store Delivery Mobile App Help
Table of contents:
- Home
- Site Phone Call
- Help Browser
- About
-
Mobile Screens
- Main Menu
- Operator Login
- Map
- Operator Profile
- Settings
- Device Info
- Device Errors
- Authorization
- Trips for Operator
- Stores for Trip
- Map for Trip
- Stock Take Equipment for Store
- Invoices for Store
- Trolleys for Invoice
- QIP Inspection
- Items for Trolley
- Invoice Status
- Equipment Deliveries
- Equipment Returns
- Missing Items for Invoice
- Rejected Items for Invoice
- Issue Items for Invoice
- Driver Signature
- Survey Questions
- OTP
- Second Receiver Signature
- Receiver Signature
- Confirmation