Repository navigation
Releases
DirectorLink · PIMA FORCE 1.2.4
DirectorLink · PIMA FORCE 1.2.4
Free, open-source Control4 driver for PIMA FORCE alarm panels. Part of DirectorLink Drivers.
DirectorLink is an independent project, not affiliated with Control4, Snap One or PIMA.
What's new
- No more typing the panel's address. Panel IP Address now shows the address the panel calls from, which the driver learns. If your router gives the panel a new address, after a power cut for example, the driver follows it and logs the move, instead of refusing the panel until someone changes the property.
- Still safe: while the panel is connected, a connection from any other address is refused, even with the panel's account number.
- A DHCP reservation for the panel in your router keeps its address from changing at all.
Updating
Download DirectorLink-PIMA-Force.c4z below, then in Composer Driver → Add or Update Driver or Agent. It updates 1.2.x in place; the address you typed becomes the known one.
SHA256SUMS.txt lists the package's checksum.
DirectorLink · PIMA FORCE 1.2.3
DirectorLink · PIMA FORCE 1.2.3
Free, open-source Control4 driver for PIMA FORCE alarm panels. Part of DirectorLink Drivers.
DirectorLink is an independent project, not affiliated with Control4, Snap One or PIMA.
What's fixed
- No Armed flash when you disarm during the exit delay. A FORCE reads armed from the start of its exit delay, so Control4 and DirectorLink showed the partition Armed for a moment before Ready. Now it shows Ready as soon as the panel accepts the disarm.
Also in this version, from 1.2.2: the typed code again, so arming and disarming from DirectorLink is quick (1.2.0 and 1.2.1 took about 15 seconds a command).
Updating
Download DirectorLink-PIMA-Force.c4z below, then in Composer Driver → Add or Update Driver or Agent. It updates 1.2.x in place.
SHA256SUMS.txt lists the package's checksum.
DirectorLink · PIMA FORCE 1.2.2
DirectorLink · PIMA FORCE 1.2.2
Free, open-source Control4 driver for PIMA FORCE alarm panels. Part of DirectorLink Drivers.
DirectorLink is an independent project, not affiliated with Control4, Snap One or PIMA.
What's fixed
- Arming and disarming from DirectorLink is quick again. 1.2.0 and 1.2.1 sealed each command from DirectorLink to this driver. On the controller, opening it took about 14 seconds, and Control4 waited meanwhile: the app could say a command failed that then went through, and Composer froze when the driver was updated. 1.2.2 takes the typed code again, as 1.1.0 did.
- DirectorLink Without Code is removed, since it needed the sealed commands. Each arm and disarm from DirectorLink asks for your alarm code.
- As in 1.1.0 and with any Control4 alarm, the typed code passes through Control4's own debug log, which only the controller's root user can read and which is gone within a few hours.
Updating
Download DirectorLink-PIMA-Force.c4z below, then in Composer Driver → Add or Update Driver or Agent. It updates 1.2.0 or 1.2.1 in place.
SHA256SUMS.txt lists the package's checksum.
DirectorLink · PIMA FORCE 1.2.1
DirectorLink · PIMA FORCE 1.2.1
Free, open-source Control4 driver for PIMA FORCE alarm panels. Part of DirectorLink Drivers.
DirectorLink is an independent project, not affiliated with Control4, Snap One or PIMA.
What's fixed
- Arming and disarming from DirectorLink is quick again. With 1.2.0 each command from DirectorLink 1.16.0 took about 15 seconds to reach the panel, and the app could say it had failed when it then went through. The driver ran under Control4's LuaJIT, where opening DirectorLink's sealed command was very slow on the controller. It now runs on standard Lua, as DirectorLink does: about a second.
Updating
Download DirectorLink-PIMA-Force.c4z below, then in Composer Driver → Add or Update Driver or Agent. It updates 1.2.0 in place; its properties and key stay.
SHA256SUMS.txt lists the package's checksum.
DirectorLink · PIMA FORCE 1.2.0
DirectorLink · PIMA FORCE 1.2.0
Free, open-source Control4 driver for PIMA FORCE alarm panels. Part of DirectorLink Drivers.
DirectorLink is an independent project, not affiliated with Control4, Snap One or PIMA.
What's new
- Your alarm code stays out of Control4's logs. With DirectorLink 1.16.0 every arm and disarm is sealed to this driver, which alone can open it. Control4's own debug log, which records the commands between drivers, sees only scrambled text.
- Without a code, if you choose: the new DirectorLink Without Code property (No, Arm only, Arm and disarm) lets DirectorLink arm, or arm and disarm, with the driver's Panel User Code. It stays No unless you change it, and DirectorLink's admins must allow it too.
- Works with DirectorLink 1.15.0 as before.
Updating
Download DirectorLink-PIMA-Force.c4z below, then in Composer Driver → Add or Update Driver or Agent. It updates 1.1.0 in place.
SHA256SUMS.txt lists the package's checksum.
DirectorLink · PIMA FORCE 1.1.0
DirectorLink · PIMA FORCE 1.1.0
Free, open-source Control4 driver for PIMA FORCE alarm panels. Part of DirectorLink Drivers.
DirectorLink is an independent project, not affiliated with Control4, Snap One or PIMA.
What's new
- Shabbat mode: arm for Shabbat from Control4 and DirectorLink, PIMA's own Shabbat arming (on panels sold as a "Shabbat system").
- Quiet on Shabbat: while armed for Shabbat, zones opening and closing are not passed to Control4, so people moving in the house cause nothing in its programming. An alarm is still reported, and the zones are reported again after Shabbat.
- The full JSON setup in the README and in Composer's Documentation tab, step by step as PIMA's guide gives it, with the Hebrew menu names. Remote Disarm is under CMS & Communication → General Settings.
- Tested with the JSON interface on a FORCE 32C (firmware 3.0.19): the panel's zones read, and armed and disarmed from DirectorLink.
Updating
Download DirectorLink-PIMA-Force.c4z below, then in Composer Driver → Add or Update Driver or Agent. It updates 1.0.0 in place: settings, connections and programming stay.
SHA256SUMS.txt lists the package's checksum.
DirectorLink · PIMA FORCE 1.0.0
DirectorLink · PIMA FORCE 1.0.0
Free, open-source Control4 driver for PIMA FORCE alarm panels (FORCE, FORCE 32C, FORCE 16). Part of DirectorLink Drivers.
DirectorLink is an independent project, not affiliated with Control4, Snap One or PIMA.
What's in it
- The panel connects to the driver on the controller, the way it connects to a monitoring station: no cloud and no extra hardware.
- With PIMA's JSON interface: arm Away, Home and Night and disarm from Control4 (disarming needs a typed code, which the panel checks), alarms, troubles, zones with their names (Hebrew too), bypass and outputs 1-8.
- Receive only, for firmware without the JSON interface (like 1.5.1): the panel's standard SIA DC-09 reports show arming, disarming, alarms, troubles and zones in Control4.
- DirectorLink's alarm agreement:
DIRECTORLINK_ALARM_CONTROLtells DirectorLink (1.15.0 and later) when arming and disarming can work, and an arm or disarm from DirectorLink is never carried out without the code a person typed.
Tested
- Receive only on a FORCE 32C (firmware 1.5.1): arming Away and disarming showed in the partition each time.
- The JSON interface against a simulated panel (75 offline tests, also run on the packaged script). Reports from panels with JSON firmware are welcome in Issues.
Installing
Download DirectorLink-PIMA-Force.c4z below, then in Composer Driver → Add or Update Driver or Agent. Setup: README.
From the earlier PimaForce.c4z test builds: this is a new driver for Composer. Remove PIMA FORCE, add DirectorLink · PIMA FORCE, and set its properties again (see the change log).
SHA256SUMS.txt lists the package's checksum.