Repository navigation
DirectorLink · PIMA FORCE 1.0.0
DirectorLink · PIMA FORCE 1.0.0
Free, open-source Control4 driver for PIMA FORCE alarm panels (FORCE, FORCE 32C, FORCE 16). Part of DirectorLink Drivers.
DirectorLink is an independent project, not affiliated with Control4, Snap One or PIMA.
What's in it
- The panel connects to the driver on the controller, the way it connects to a monitoring station: no cloud and no extra hardware.
- With PIMA's JSON interface: arm Away, Home and Night and disarm from Control4 (disarming needs a typed code, which the panel checks), alarms, troubles, zones with their names (Hebrew too), bypass and outputs 1-8.
- Receive only, for firmware without the JSON interface (like 1.5.1): the panel's standard SIA DC-09 reports show arming, disarming, alarms, troubles and zones in Control4.
- DirectorLink's alarm agreement:
DIRECTORLINK_ALARM_CONTROLtells DirectorLink (1.15.0 and later) when arming and disarming can work, and an arm or disarm from DirectorLink is never carried out without the code a person typed.
Tested
- Receive only on a FORCE 32C (firmware 1.5.1): arming Away and disarming showed in the partition each time.
- The JSON interface against a simulated panel (75 offline tests, also run on the packaged script). Reports from panels with JSON firmware are welcome in Issues.
Installing
Download DirectorLink-PIMA-Force.c4z below, then in Composer Driver → Add or Update Driver or Agent. Setup: README.
From the earlier PimaForce.c4z test builds: this is a new driver for Composer. Remove PIMA FORCE, add DirectorLink · PIMA FORCE, and set its properties again (see the change log).
SHA256SUMS.txt lists the package's checksum.