We need an officially supported ITU Region 3 device, propose candidates here.

[cooperq]

Right now we don't have any officially supported ITU region 3 (southeast asia) device. The pinephone and UZ801 are both functional but aren't really great candidates for mainline support for various reasons, please submit ideas for devices we could support here. Devices should be roughly similar in capabilities to the orbic or TP-link, rootable, and have a qualcomm chip.

[untitaker]

The TP-Link M7350 is confirmed to work in australia, it's just not economical (similar situation in US I think?)

[r1bnc]

These devices are pretty common here but there's a lot of variations, some has screens and some LEDs only. They have the same chipset as UZ801 but supports more bands. They don't have "5G" support (wifi 5GHz nor 5G network).

[untitaker]

interesting yeah, that worked. didn't know about that trick! daemon starts up fine when run manually from the shell, the installer crashed halfway through trying to modify files for autostart. after poking around a bit it doesn't seem like there's an obvious spot to hook autostart into, and most of the system is mounted read-only with mount -o remount,rw not working.

• no /system/bin/init* (and read-only anyway)
• no /etc/init* (and read-only anyway)

Here is a photo of the PCB as requested, it's not uz801 at all:

[r1bnc]

Thanks, this is the same internals on my M9S. I'll revert back to the stock firmware and check if I can get Rayhunter running.

[r1bnc]

I attempted manual install of Rayhunter and used UZ801 as config device type, it works. /system can be mounted with rw.
Added 30s sleep after the system post boot /system/etc/init.qcom.post_boot.sh before running the rayhunter daemon for it to capture data or else it will be 0 bytes. I haven't checked on the battery percentage and the display support.
Steps followed: #479 (comment)

[untitaker]

interesting, mount -o remount,rw does not work on my device... 😬 i dread the idea of supporting this level of hardware diversity

[r1bnc]

I ordered a similar device such as yours, and I'll let you know if the /system cannot also be remounted.

[r1bnc]

Called M6, same internals as M9S but no LCD.

[cooperq]

So it sounds like the m6/m9s is a good device for us to target, no?

[r1bnc]

So it sounds like the m6/m9s is a good device for us to target, no?

Yes, manually running Rayhunter works on these two and also they seem to come from the same ODM based on the IMEI and PCB markings. If I get another device, I'll post it here.