Repository navigation
Greenhouses
- Place a Greenhouse Controller at the centre of the front wall, facing out, one block above the beds. Check the hologram for the build orientation.
- Build a 7×7 perimeter extending behind the controller. Make two wall layers. Glass blocks, stained glass, tinted glass and panes work for the walls.
- Place a full-height door in the front wall beside the controller, away from the corners. A vanilla door or a compatible modded door works. Fill the 7×7 roof with full glass blocks. You can swap a roof block for an Irrigation Sprinkler.
- Till at least nine plots in the 5×5 interior. Use the whole floor for up to 25. Fill the controller with up to four buckets and check the Overview tab for seal and water status.
The Climate tab controls heating and ventilation. Fuel the heater with coal as needed and aim for 19–28 °C and 45–78% humidity. Use the Overview warnings to navigate to water, seeds, storage or automation settings.
| Tier | Upgrade | Controls |
|---|---|---|
| 1 | Greenhouse Controller | Watering, environment and climate |
| 2 | Automation Upgrade | Toggle harvesting and replanting separately. Pick up harvests in Storage. |
| 3 | Smart Farming Upgrade | Auto-plant using the Seed Bank, auto-breed selected seeds and view monitoring. |
At Tier 3, use the Planting tab to set crop categories and open the Seed Bank. Set slot priorities, reserves, species locks and minimum Growth, Yield and Resilience. Use presets to save common settings. Auto-plant checks for free plots every three seconds. Auto-breed runs a station cross every 15 seconds while water and eligible seeds are available. Check slot tooltips to see what is blocking a planting.
The Vertical Greenhouse is a single machine that occupies 1×1×3 blocks. Place the item where there are three clear blocks in a column. Open any section to reach the same GUI.
- Load up to six trays, one seed per tray. Fill the tank with buckets or connect irrigation to the base. It holds 16,000 mB.
- Turn on Grow to harvest supported crops. A harvest costs 250 mB and leaves the tray seed in place.
- Turn on Breed to cross eligible seeds. An offspring costs 500 mB. Use Auto pair to rotate amongst trays, or Fixed pair to assign distinct A and B trays. Matching native seeds must have the same item and variant. Agri Evolution seeds use the regular breeding pool.
- Collect crops and seeds from their separate output rows. Set a batch target to stop breeding after a chosen number of offspring, or use Unlimited.
- Configure Outputs per face as Crops, Seeds, Both or Off. Route to side chests or place a hopper below. Right-click a face's output button to route Rejected seeds to it. For a Seed Vault beside the base, choose Seeds or Both on that face. Use the vault filters to keep the species and gene minimums you want.
- Pick up an Agri seed on your cursor and click Any species to set a target species. Click the species control with an empty cursor to clear it.
- Set minimum Growth, Yield and Resilience values with G, Y and R. Left-click raises the minimum in steps of ten. Right-click lowers it.
- Choose a batch size. For example, set 5, use a Tomato seed as the species sample, and set Y ≥ 80 to stop after producing five qualifying Tomato seeds.
- Check the Rejected seeds row for offspring that missed the target. Each stored offspring uses 500 mB. Only qualifying seeds advance the batch. If the relevant output row is full, the next result waits for space.
Changing the species, minimum genes or batch size starts a fresh count.
| Pipe intake | Behaviour |
|---|---|
| Demand | Draws water for work when the tank is below 1,000 mB. |
| Keep Full | Draws up to one bucket per second when a full bucket fits, including while idle. |
| Off | Turns off automatic pipe intake. Manual buckets and compatible water pumps can still fill the tank. |
A full output buffer pauses the associated work. Check the intake status if pipes fail to refill the machine. Use the Spanner on any section to trace from the base, and see the built-in vanilla harvest list for supported non-Agri crops.