Repository navigation
Releases
Steelbound 0.3.1 (Beta)
Steelbound 0.3.1 (Beta)
A small update after the Line of Contact launch: online play now works on more PCs, plus a fix from your reports. Thank you for all the feedback on 0.3.0!
Line of Contact
- Online encryption built in: Online matches are encrypted end to end. Until now the client used a component of the operating system for this, and on some systems that component was incomplete. Those players saw "Crypto self-test failed – online play off" on the Multiplayer page. Steelbound now ships its own copy of a proven, open-source crypto library (BearSSL), so the same code runs everywhere. The protocol is unchanged: you can still play with friends who are on 0.3.0, and the start-up self-test still switches online play off if anything doesn't add up.
Steel Battalion
- IGNITION+START cheat locked again (#18): The trick that hides the cockpit for a bigger main monitor worked from the start. As on the console, it now stays locked until the game unlocks it. The Hide cockpit option in the launcher still works anytime.
Still open
- Mission 3, road moving slightly up and down above 30 FPS (with thin white lines): I measured it. The game's own 3D data is clean, and the cause is in the smoothing between frames that the client adds above 30 FPS. A fix is being worked on; 30 (original) gives you the clean picture until then.
- Line of Contact cockpit lamps (#55, #56): the game itself switches these lamps, and I found no difference on our side. A clip from an original Xbox would help to compare.
- Line of Contact start stops at the Dolby logo for some players: I'm looking into it. If it happens to you, please press F11 and attach the report.
Download
Steelbound-0.3.1-win32.zip is below. Unpack it over your existing folder or into a new one; your settings and saves stay where they are. You still need your own disc images; this download contains no game data.
Steelbound 0.3.0 (Beta)
Steelbound 0.3.0 (Beta)
Line of Contact is here. With 0.3.0 everyone can play Steel Battalion: Line of Contact, the online sequel – including online matches against other pilots through our own meeting point. Line of Contact support is new and marked experimental. A big thank you to everyone who tested the early builds and sent reports!
Line of Contact (new, experimental)
- Start it from the launcher: click LINE OF CONTACT at the top, choose your own disc image (
.iso, the extracted folder or itsdefault.xbe) and press Play Line of Contact. Version 1.0 with or without the media patch works. A game with the title update applied or the Japanese Pilot Test disc gets a clear message. - Online lobbies: choose Connect to steelnet in the launcher settings (gear at the top right). Public matches show up for every pilot under Search Match, with the host's name and an estimated ping. Private lobbies give you a room code to share with friends. Line of Contact is an online game: without Connect to steelnet, Play Line of Contact stays greyed out and the launcher shows why, with a button to the settings. No account needed, you can play as a guest. If two PCs can't reach each other directly, the traffic is relayed automatically. Game traffic is encrypted end to end.
- Rollback: each mission negotiates rollback automatically. Corrections are smoothed instead of jumping, and the input delay drops by one tick whenever the connection allows it.
- Instant own movement: your own mech reacts right away in online matches. Driving, turning and dodging are shown without the network input delay, while the shared simulation stays exactly in sync.
- Snappier aiming: your crosshair and view follow the mouse on every rendered frame, and target markers, the compass band and the radar line up with your instantly shown mech (about 50 ms quicker aiming).
- Smooth opponents (new option on the Multiplayer page, default Auto): other VTs no longer jump when a network correction comes in; they are shown slightly later instead.
- Smoother picture: frame pacing no longer waits for the game's prediction step, in-between frames follow a steady clock, and with VSync on the frames line up with your monitor's refresh. You get fewer micro-stutters at 60, 120 and 144 Hz. Single-frame hitches at high refresh rates are also much rarer, because the frame pacer seldom has to wait for the game's rendering work.
- Fewer hitches when other programs are busy: on PCs with 4 or more CPU threads the game's emulation threads get a slightly higher priority, so background apps no longer steal their CPU time.
- Lockstep fallback (when a player turns rollback off): the input delay now stays close to what the connection needs (about 100 ms nearby, 150 ms across continents), and a healthy player is no longer dropped when the connection lags badly.
- Fastest route, automatically: online matches pick the fastest connection to each player (direct, EU relay or US relay) and keep measuring during the match. If another route stays clearly faster, or the current one fails, the game switches seamlessly without dropping out of sync.
- Test partner result now shows the input delay that is actually in effect, in lockstep as well as with rollback, matching the F3 panel.
- Multiplayer page in the Line of Contact tab with Match (public/private, room code), Account and Network: switch rollback, instant own movement, smooth opponents and the adaptive lower input delay on or off to compare them (all on by default).
- F3 network info: route, ping, packet loss, rollback or lockstep, input delay and smoothing. Shift+F3 moves the panel.
- Another round without restarting: after a mission everyone stays in the game; the host simply creates a new match.
- Menus run at your frame rate and need less graphics power (#57). First-time stutters while the game prepares its graphics are much shorter.
- Game speed never depends on your frame rate. I checked fire damage and timers against the console (#53): the mission runs at the console's 20 ticks per second at any frame rate.
Fixed from your reports
- Crash in a running Mission 03 (#62).
- Broken cockpit and radar textures in the second match (#60).
- Beeping that did not stop (#61), the eject alarm (#51) and the title music (#54) carrying on into the menus.
- Rubber banding at the start of a match (#58).
- Graphics settings for Line of Contact were not kept (#50).
- Thin line effects (e.g. around ejecting) were drawn too thin at high resolutions (#59, partly – a short clip helps if you still miss an effect).
- Eject works as on the console and stays in sync online.
Steel Battalion
- Tuner dial on the mouse wheel reacts immediately instead of about a second late (#63).
- Sharp HUD at higher render resolutions: compass letters, tick marks and small digits at the bottom of the main monitor are one original pixel wide again instead of thick and smeared (e.g. with "HD 2x render").
- #44 (white D3EYE in Mission 23): not reproduced yet. The F11 report now also shows when a model's extra texture layer is missing. If you see it, please press F11 while it's on screen.
- Side step on keyboard and mouse: a short tap of the side-step key now gives a real side step in the direction you press, instead of only the sound.
- The launcher accepts an extracted game folder or its
default.xbein more places and explains clearly why an image can't be used (#52).
Launcher
- Tidier launcher: the two game names at the top – STEEL BATTALION and LINE OF CONTACT – are now the game switch (the active one is underlined in orange), settings that apply to both games now sit behind the gear at the top right (online & updates, language, window size, background, test tools), a small status next to the gear shows steelnet online and new versions, and the first start asks just once: connect to steelnet, check the version only, or stay offline. The version check still only shows a hint and links to the release page – it never downloads anything.
- Own settings for each game: Steel Battalion and Line of Contact now keep separate display, graphics, control and audio settings; on the first start both begin with your previous settings. Options that don't exist in Line of Contact (such as the 50 Hz TV speed) are greyed out there with the reason, and a 16:9 picture format now shows as 16:9 everywhere in the launcher.
- Clear start button: without a disc image, Play is greyed out for both games, with the reason below and a button that takes you straight to the image selection. Hover the steelnet status next to the gear for details (reachable, response time, last check); it turns green when steelnet is online.
- Eject has a key now: Eject (handle) is bound to Shift+Delete in the standard keyboard layout, for both games (Reset to default sets it).
- Clearer account page (Line of Contact): while Multiplayer is open, the sidebar shows two sub-items, Match & network and Account. The account page tells you at a glance whether your account is secured, offers one main button when something needs doing (Connect with Discord), and groups securing, moving to another PC and sign-out/delete from top to bottom.
Still open
- #55/#56 (collision lights): the lamps are switched by the game's own logic; I am still comparing with the console.
- Please keep reporting – in the issue form choose Which game? so I know where to look.
Download
Steelbound-0.3.0-win32.zip is below. Unpack it over your existing folder or into a new one; your settings and saves stay where they are. You still need your own disc images; this download contains no game data. How to play Line of Contact: docs/LINE_OF_CONTACT.md in the download.
Steelbound 0.2.2 (Beta)
Steelbound 0.2.2 (Beta)
This update is mostly about sound, which you told me was the most noticeable problem right now. It also fixes ghosting at high frame rates and several smaller bugs from your reports. Thank you!
Sound
- Pitch and tone: Engines and weapons no longer sound too high or too bright. The game shapes almost every sound effect with an envelope (pitch, volume and filter over time), and the client ignored it until now.
- No more distortion: In loud battles, part of the sound used to clip. Music, radio and cutscenes now also play at the same level as on the console.
- Room reverb: You now hear the game's own reverb rooms, such as the cockpit, the landing craft and the city.
- Doppler: Doppler works the way the game asks for it.
- Muffled sounds: Sounds behind walls and obstacles are now muffled the way the game intends.
- Headphones (new option): Under Audio & extras, a new Headphones switch turns on 3D sound, so you can hear whether something is in front of, behind or beside you. The original console did this too.
- 5.1 / 7.1: With a surround speaker setup, sound now comes from all speakers. Stereo downmixes no longer distort.
Fixed
- Ghosting / double edges at high frame rates while turning (#45). Above 30 FPS, trees were still drawn at the game's 30 Hz position while the rest of the world moved smoothly, so they showed double edges when you turned. Trees now move with the rest of the scene. 30 FPS is unchanged.
- Thin effect lines missing at higher resolutions (#49). The game draws effects such as electric arcs, sparks and the FRONT VIEW grid as very thin lines. At higher render resolutions the client drew them far thinner than the original, so they almost disappeared. They now have the same thickness as on the console at any resolution. If the EMP arc or the incoming EMP shot in Mission 9 is still missing for you, a short clip would help a lot.
- White flashes from the sun. The sun glare could stay on even when the sun was hidden behind buildings, hills or other VTs. It now only appears when the sun is really visible, as on the console.
- Cockpit gauges could stop updating (gear, speed, health, weapon readouts). I added a safeguard against this. Feedback reports (F11) now also include the state of these displays, so if it still happens to you, please press F11 right then.
Still open
- #46 (engine pitch): the new envelope handling changes the engine sound noticeably. Please listen again and tell me how it compares to the original now.
- #47/#48 (white shapes in Mission 23): not reproduced yet. The F11 report now shows exactly which textures are missing at that moment and whether sun glare is involved. If you see it again, please press F11 while it's on screen.
- #44, #40, #36 and #10 are still on the list.
Download
Steelbound-0.2.2-win32.zip is below. Unpack it over your existing folder or into a new one; your settings and saves stay where they are. You still need your own disc image of Steel Battalion; this download contains no game data.
Steelbound 0.2.1 (Beta)
Steelbound 0.2.1 (Beta)
A bug-fix update for the first beta. Everything here comes straight from your reports on GitHub and Discord – thank you!
Fixed
- Launcher crashed when replacing or adding a key binding. Deleting a binding worked, but Replace and Add closed the launcher on most PCs – every PC without an original Steel Battalion controller plugged in. A status text was simply too long for the space reserved for it. Fixed, and the launcher now shortens such texts instead of crashing.
- Gear indicator on the original controller kept flashing (since alpha.9). The client sent the controller's lamps a mix of the current state and an outdated one, so the gear lamp kept switching back and forth. Now the lamp of the engaged gear stays lit, as on the console. During a replay it shows the gear used in the recording, which can differ from your lever – that is original behaviour. Reconnecting the controller after unplugging it is also more robust now.
- Large screenshots at 30 FPS (original). With 30 FPS (original), 4K, 8K and the other large photo sizes, outside view only and the free camera silently fell back to window size. They now work at 30 FPS too: when you take a large photo, the game runs on for two frames to capture the scene, then saves it at full resolution. Large sizes still only work during missions.
- Lighting on the main monitor (#39, #41, partly #44). After drawing certain models with a special material – in the Quasar, for example, the retracted manipulator – the game restores the scene's ambient light, but the client handed back zero. Everything drawn after it on the main monitor became too dark: the Capitol changed brightness when you moved the manipulator in and out, and enemies like the Prominence M2 looked much darker than in the original. Fixed. For #44, real-time shadows are still off by default, and I couldn't check the sky in the D3EYE fight yet.
- Black or missing textures (#37, #42, #43). I found two memory placement problems that can leave single textures and screens without their data, or pointing at the wrong data – one of them shows up mostly on AMD systems. Which texture gets hit depends on your PC's memory layout. I reproduced and fixed the same kind of error on the main monitor in Mission 14, but I couldn't drive to the exact spots from the reports (soldiers in Mission 14, the building screen and the fort wall in Mission 23). Please check them again – and if something is still black or missing, press F11 right there. The diagnostic package now tells me whether this problem still happens on your system.
Still open
- #36 (road darker on the main monitor in Mission 13): not reproduced yet – possibly the same cause as #39/#41. Please tell me if you still see it.
- #10 (missing cutscene in Mission 10) and real-time shadows are still on the list.
Download
Steelbound-0.2.1-win32.zip below. Unpack it over your 0.2.0 folder or into a new one – your settings and saves stay where they are. You still need your own disc image of Steel Battalion; this download contains no game data.
Steelbound 0.2.0 (Beta)
Steelbound 0.2.0 (Beta)
This is the first beta. Thank you to everyone who tested the alphas – almost everything in this release comes from your reports, clips and diagnostic packages. Steelbound is still a work in progress, so please keep telling me what breaks.
Highlights
- AMD graphics cards: white flashes and white areas. This was the big one. Some graphics drivers (AMD among them) handle one Direct3D 11 feature differently, and on those drivers the extra in-between frames above 30 FPS could come out partly or completely white – when closing the hatch, at ignition, on monitor frames. At 120 FPS three out of four frames you see are in-between frames, so it could look like whole screens were white. I could finally reproduce this without an AMD card, and the game now detects it and draws those frames another way.
- White, grey or black textures and missing pictures (#7, #11–#15, #19, #23–#26, #30–#32 and more). The game keeps some of its pictures in a special memory area. On some PCs (very often with AMD cards) parts of that area end up at high memory addresses, and my texture loader wrongly rejected those addresses – so those textures were never loaded: white channel labels in briefings, white weapon pictures, grey letters, missing ground, building and tree textures, white instruments. Your diagnostic packages showed exactly this, and when I force the same memory layout on my PC, I get your pictures – and with the fix they're gone.
- Monitor view (experimental). A new view that shows the main monitor full screen, exactly as it looks inside the cockpit: same light, colour, grain, interference, night vision and HUD, just without the cockpit around it. If you like, the radar and FRONT VIEW appear as small panels. You'll find it in the launcher under Graphics › Cockpit & monitor (Cockpit: Monitor view) or in the Esc menu under Cockpit, and you can switch it while playing. It starts once your VT is online; the startup sequence and a damaged cockpit stay as in the original. Not available in VR.
- White lines while looking around. The long white streaks across the main monitor when you turn were gaps between ground and sea tiles. They are mostly gone (Mission 02: from 60 to 4 in my test run, the city mission from 7 to 2). What my tests still count is mostly real motion like surf, not errors.
- Fire and lights no longer shine through walls (#16). Fire, smoke, explosions, door lamps and VT lights are now hidden behind buildings again, like on the original console.
- Missing help texts and messages are back. After any mission you had played (and after the title demo), the game's own text lines were not shown: the help line under the menus ("Move Out", "Campaign"), the message after Mission 11, the hint before Mission 20 and the troop-choice question. All fixed.
Fixes
Campaign and story
- Ending of the first campaign (#8, #9): the ending text and the credits now play after the final boss, instead of a wireframe picture.
- Cutscene sound playing twice in Mission 10 (#10): I tracked this down to a short stall during the in-mission movie; more work on it is planned.
- Loading freeze (#27, and very likely the Test start crash in Mission 08): a rare hang while loading a mission is fixed. It was much more likely on some systems than on others.
Controls
- Joysticks and HOTAS – new live view and calibration: Controls › Joystick/HOTAS now shows every axis live, and you can calibrate each axis (range, centre, deadzone, invert, "no centre" for throttles). The game uses your calibration.
- "Copy device info" in the same dialog copies your device's name, IDs and the list of axes/buttons the driver reports – no input values. If a device does not work, please paste this into your report.
- Flight sticks that only reacted diagonally (e.g. Hori in Xbox mode): the assign dialog now learns axes from the rest position and refuses to put the same axis on both aim directions. If you assigned the aim axes in alpha.9, please assign them once more.
- Older joysticks with unusual axis IDs (e.g. Logitech Wingman): their stick axes are now read as well, not just the throttle. Tested with simulated devices – feedback from real hardware is very welcome.
- Original controller unplugged and plugged back in: it now works again right away instead of freezing its last state.
- Replays: a replay now ends only with its own key (Backspace by default, bindable). The mouse no longer ends a replay by accident, and the click that brings the window back to the front is ignored.
Display and sound
- Game slowing down in big fights (#29): on some systems (especially AMD cards at 120 FPS, or when another program uses the graphics card at the same time) the whole game could slow down after explosions and fires. The game now keeps its speed steady and skips in-between frames instead. The first appearance of an effect also stalls less, because its shader is now prepared faster.
- Frame rate list matches your monitor: the launcher and the Esc menu only offer frame rates up to your monitor's refresh rate. Rates that don't divide evenly into it are marked "(may judder)". If your saved value is higher than your monitor, it stays and is shown as "(above monitor)".
- One "Original" preset running at your monitor's refresh rate, plus Performance.
- Volume sliders for master, music, effects and voice – in the launcher and in the Esc menu.
Privacy
- Earlier versions wrote a line for every released key into the log file. That was a leftover from a developer tool. The game no longer logs key presses. If you shared logs or diagnostic packages from alpha.9 or earlier, they may contain these lines (key codes and timing only).
Line of Contact (work in progress)
Still locked in the launcher ("Coming soon"). Progress since alpha.9: two copies of the game now play the same mission together and stay in sync, the sound works, and the mission picture has come a long way – terrain up to the horizon, objects like power lines, the full 3D cockpit with its instruments, and the main monitor after the hatch closes. It still runs slowly in the mission, so there is more to do before I unlock it.
How to report problems
Press F11 (or Esc → Feedback), describe what happened and submit the pre-filled GitHub issue. After a crash, use Report on GitHub on the launcher's Play page. Please don't attach game files or saves.
Known issues
- White or missing textures: both causes I found are fixed, but I could not test on a real AMD card. If anything still looks white, grey or black, add the line
tex_missing_mark=1touser.cfgand press F11 on that spot: missing textures then show up in a signal colour, and every F11 report now includes a short texture health section that tells me why. - Thin white lines above 30 FPS: much rarer now, but a few may remain in fast turns. 30 (original) is always clean. If you still find a spot with clear white lines, an F9 clip helps me most.
- HD texture packs are experimental: if something looks wrong, press Shift+F8 to compare with the original look.
- USA version: experimental, so expect differences from the European version.
- Joysticks/HOTAS: the new axis handling was tested with simulated devices only.
- VR, replays from the launcher and video export are experimental.
Steelbound 0.1.0-alpha.9
Thank you for testing – once again most of this release comes from your reports. Things will break – please tell me.
New since alpha.8
Highlights
- The original look comes first. Many of you told me that artifacts went away once you switched back to 4:3 and plain settings – thank you, that was the key hint. So:
- New installs now start in the original 4:3 picture (black bars, never stretched). Widescreen sides are still there, but they are now a separate, experimental choice on the Display page.
- Everything that changes the original look – HD textures, effect packs, widescreen, lighting, post-processing, effects, monitor effect, hidden cockpit, HUD labels – is marked as Experimental (flask icon) in the launcher and in the Esc menu.
- When any of it is active, the Play page shows a yellow hint "You're not playing the original look" with two buttons: Back to original (resets only the graphics, keeps frame rate, controls, sound and VR; Ctrl+Z undoes it) and Start original once (one start in the original look without packs, your saved settings stay untouched).
- Shift+F8 in the game switches live between the original look and your own settings, so you can check in a second whether a glitch comes from an experimental option. You can bind it to any key, key combination, gamepad button or controller button in Controls › Assign….
- Your saved settings are not changed. If you saved widescreen before, you keep it – the launcher just shows the hint.
- Crash and freeze reports. If the game crashes or stops responding, it now saves a report on your PC, and the launcher offers to send it to me as a GitHub issue in two clicks. Nothing is uploaded automatically. Details under Diagnostics.
- Steadier in-between frames above 30 FPS. The in-between frames used to come out slightly different on every run, which made the white lines and bright patches appear at random. They are now exactly the same every time. The random bright wedges over the ground are gone. On top of that, I fixed the biggest remaining case: water and rock surfaces near the camera could shine through the road for a split second while turning – they now move together with the rest of the picture.
- Bigger launcher. The launcher window is larger and easier to read by default, and it still fits on small screens.
Fixes
From your reports
- HD texture packs: white boxes and flat white areas (#4, #5): new render surfaces now start out black instead of containing leftover graphics memory, which could behave differently on some graphics cards (especially with many large HD textures). Together with the texture cache fix from alpha.8, this covers the most likely causes. I could not reproduce either report on my machine, so please try again with this build and tell me whether it is gone.
- HD texture packs, extra safeguard: packs no longer replace textures that are still empty (not loaded yet), so a half-loaded texture can never pick up the wrong HD image.
- Weapon/ammo display froze after a resupply (#3): fixed by the texture cache fix in alpha.8 – confirmed by testers, it can no longer be reproduced. Thank you for the reports and the clips!
- Movie turned black with a white rectangle after Alt-Tab: if a movie frame cannot be loaded, the last good frame now stays on screen instead of a white box. Thanks to the tester who sent the screenshot.
- Comm lamps on the original controller stayed dimly lit after a radio call: the last "off" step could get lost. They now go fully dark. (I tested this with a simulation – please confirm on a real controller.)
From your detailed report #6 – thank you!
- Original controller labels: the controller test showed the main weapon as TRIG and the sub-weapon as FIRE. The buttons always did the right thing; only the labels were swapped. They now read MAIN and SUB.
- Folder selection stayed greyed out after a failed disc image: a disc image that fails the check no longer locks the game-folder option under Advanced, and picking a folder replaces the failed image. No restart needed.
- Xbox-compatible flight sticks (e.g. some Hori sticks) no longer vanish silently from the joystick/HOTAS list: they appear as "Xbox-compatible: …" with a short explanation, because they run through the gamepad path.
- Strange
KEY:201/KEY:209entries when assigning such a stick are gone: the assign dialog now learns its sticks, triggers and buttons as gamepad inputs (PAD:…). - Joysticks on the Controls page: DirectInput joysticks are now listed next to the gamepad status.
- Joystick axes that could only be learned in one direction: some older drivers did not accept the value range the launcher asked for, so the axis was cut off at one end. The launcher and the game now check the range of every axis and convert it if needed, and they also pick up axes that older drivers report in an unusual way. (Tested with simulated devices – feedback from real hardware is very welcome.)
- Layout name: when you open one of your layouts, its name is now filled in, and saving under that name updates it.
- Your idea: a blank layout. The assign dialog has a new Clear all… button that removes every game control, so you only assign what you need. Client keys (pause menu, photo, feedback, recenter) stay.
- The missing menu sounds you reported were already fixed in alpha.8 – for the European and the US version.
Under the hood
- Less CPU work in busy battle scenes: strips and fans of triangles are now drawn from a fixed index list instead of being expanded on the CPU every frame – about two thirds less vertex data per frame and roughly 15–20 % less time to hand a busy frame to the GPU in my measurement, with an identical picture.
Launcher
- Tidier in-game settings (Esc): the settings menu was getting huge, so it now has a sidebar with the same groups as the launcher – Quick, Game & controls, Display, Cockpit & monitor, World & light, Effects, Color, Textures (plus VR when you use it). Quick holds the handful of things you change most, each group shows its main settings, and the fine-tuning sliders are folded away under Advanced ►. Every group has Back to original, and settings that need a restart are marked with ↻. Nothing was removed and your saved settings stay as they are. In the launcher, Show advanced settings reveals the fine-tuning there too.
- Screenshots, reworked: F12 saves a screenshot right away – no menu, just a short Screenshot saved – using your photo settings: view (cockpit / without cockpit / outside world only), size (window, 4K, 8K or ×2–×8) and PNG/JPG. Shift+F12 (or Esc) opens photo mode to set things up. Without cockpit now shows exactly what you see with the game's own IGNITION+START view – same framing, monitor effect, HUD, FRONT VIEW and radar – instead of a different, wider and darker picture. You can also hide the HUD, the REPLAY label and the game logo in replays, and the Steelbound watermark in exported videos. Both keys can be assigned in Controls › Assign…; the settings are on Audio & extras › Photos & screenshots.
- Bigger by default: the launcher opens at a larger size with larger text. If your screen is small, it scales itself down to fit. You can choose the size (compact = the old size, normal, large) at the bottom of the navigation.
- One Original preset: Original (HD) – 120 FPS is now simply Original – everything as on the Xbox, running at your monitor's refresh rate. Original (HD) – Performance is now Performance. Remastered subtle/strong and Clear view are marked as experimental with the flask icon.
- Experimental options are marked with a small flask icon – hover it to see why. When anything experimental is active, the hint on the Play page and the affected pages in the navigation show a warning triangle. The Esc menu uses the same icon. (On Windows 10 the icon reads EXP.)
- Widescreen: the aspect choice Cut to 4:3 is now called 4:3 (original) and is the default. If you pick widescreen sides with Fade out, the width and strength of the fade can be set right below.
- Hide cockpit (experimental): Graphics › Cockpit & monitor › Hide cockpit (bigger outside view), also live in the Esc menu (Quick or Cockpit & monitor). Once your VT is online, the cockpit is hidden and you get the large outside view with HUD – the same view as the game's own IGNITION+START trick, which still switches back and forth as in the original. Not in VR.
- Stick aiming "Like a mouse": Controls › Stick: Position (original) or Like a mouse, plus a sensitivity setting (also in the Esc menu). With Like a mouse, pushing a self-centring gamepad or joystick stick moves the weapon arm (further = faster), and when you let go, it stays where it is – like the original controller's aiming lever. A new bindable action Center aim brings the arm back to the middle. Mouse and stick can be used together. Thanks for asking for this.
- New page "Alpha Test" (tools for testers, not part of the original game):
- Test start: pick a mission (training or 01–23), a VT and a difficulty, and the game goes straight there with a fresh test pilot in a separate test folder. Your normal saves are never touched. Not every VT is available for every mission in the original game, so some combinations are untested territory.
- A/B switches for the in-between-frame fixes, to compare white lines above 30 FPS (apply on the next start).
- Problem reports: see Diagnostics.
Line of Contact (work in progress)
The launcher now has a second tab for Steel Battalion: Line of Contact, the online sequel. Starting it is still locked ("Coming soon") – but there is no secret about where it stands, so here is a short progress report:
- Line of Contact boots from your own disc image to the title scr...
Steelbound 0.1.0-alpha.8
Eighth alpha. You need your own copy of Steel Battalion as a disc image (.iso/.xiso). Europe (PAL) is fully supported; USA (NTSC-U) is experimental. Setup instructions are in the README.
Thank you for testing – your reports made most of this release. Things will break – please tell me.
New since alpha.7
Fixes from your reports
- Fewer glitches in the in-between frames (above 30 FPS): ground textures flashing over the main monitor, bright triangular splinters and black patches when looking up/down or turning fast came from objects drawn at slightly different moments in the same frame. In my tests these glitches dropped by about 90 %. Please tell me if you still see white lines – especially at the map edge and on mountains.
- Washer showed old VT boot screens (#2): pressing WASHING now shows the proper water streaks. The cause was a texture cache that missed when memory got reused – this fix also covers other short effects that could briefly show old pictures.
- Saved replays now show up in REPLAY LOAD after a restart and play back.
- Replays from a real Xbox can be loaded: on start the client backs up the original file and makes it loadable (the same way it already handled Xbox saves).
- Menu sounds are back: cursor, select and confirm sounds in the menus (including typing your pilot name) were missing in every version – they play again now.
- VT wireframes have their own colors again on loading screens and in the VT menus (e.g. Decider teal, Falchion pale yellow) instead of all white.
- Settings saved in the Esc menu no longer get reset: if the launcher stayed open while you played, starting again wrote its old values back over what you had saved with Save as default (e.g. World lighting). The launcher now keeps the values you saved in game.
New options
- Mouse wheel can be bound: wheel up/down (and tilt left/right) are now sources in the Assign controls dialog – each notch is one press, e.g. for zoom, gears or tuner. Just turn the wheel in learn mode.
- Smoother high-resolution photos: photos at 2×–8× really are rendered at full size, but every edge had hard one-pixel steps, so zooming in looked blocky. Photos now smooth their edges automatically. Fine surface detail stays soft because the game's original textures are small.
- Texture packs work with every supported game version (Europe and USA); packs can also be made without being tied to one version.
- Play replays straight from the launcher (Advanced › Replays…, experimental), optionally with a fixed outside camera.
- Export a replay as an MP4 video (Replays… › Export video…, experimental): rendered offline in 1080p, 1440p or 4K at 30 or 60 FPS, with game sound. No window pops up while it renders.
- New default for widescreen sides: fade out with 8 % width (your saved settings stay as they are).
- Clear view graphics preset (launcher and Esc menu): no lighting pass and no monitor noise – easier to see, not the original look.
- Experimental tab in the Esc menu: a wireframe mode and a vaporwave look, just for fun (off by default, not in VR).
- VR: a dark surround and a soft edge fade when you look past the original cockpit (on by default, adjustable in Esc → VR).
- Update hint (optional): the launcher asks once whether it may check for new versions at startup. Default is no. If you say yes, it sends one request to the GitHub release list and only shows a hint with a link to the release page – nothing is downloaded or installed.
Under the hood
- Less CPU work per frame for older PCs: redundant graphics calls are skipped and per-draw data is batched – about 12–15 % less CPU time per game frame on a slow core, with identical pictures.
- The USA version is better covered by my automatic tests, and the 50 Hz option was checked with it.
How to report problems
Press F11 or F9 (or use Esc → Feedback). Describe what happened and submit the pre-filled GitHub issue. Attach the files from the feedback folder that opens alongside it. Please don't attach game files or saves.
Known issues
- White lines at frame rates above 30: much rarer now, but thin streaks may still appear in some places. 30 (original) is always clean. Reports with F9 (short video) help me most.
- HUD weapon/ammo display after a helicopter resupply (#3): I could not reproduce it yet; the cache fix above may already solve it – please tell me if you still see it.
- USA version: experimental, so expect differences from the European version.
- Camera feels off when the terrain gets higher (Mission 9) – under investigation.
- Joysticks/HOTAS were developed without real hardware – please tell me how your device behaves.
Steelbound 0.1.0-alpha.7
Seventh alpha. You need your own copy of Steel Battalion as a disc image (.iso/.xiso). Europe (PAL) is fully supported; USA (NTSC-U) is now playable too (experimental). Setup instructions are in the README.
Thank you for testing! Things will break – please tell me. Every report helps me.
New since alpha.6
USA version (experimental)
- The launcher now recognises the USA (NTSC-U) release and starts it. There is still only one launcher for both versions. The Play page shows "USA (NTSC-U) – experimental".
- US saves go to their own folder (Advanced › Saves), so European and US saves never mix.
- I have tested booting, the menus, creating a pilot, Mission 1 up to the debriefing, saving and loading, the intro movie, high frame rates and mouse aiming. Anything beyond that is new territory. If something looks or behaves differently from the European version, tell me via F11.
Display
- Cockpit width (Display page and Esc menu, 0–10 %, default 0): stretches the cockpit picture slightly sideways, so the main monitor fills more of a wide screen. It is not original, so it is off by default. It only applies to the cockpit view on a monitor (not in VR).
- Sharper cockpit monitors in high-resolution photos: photos at 2×/4×/8× now also render the cockpit monitors at the higher resolution, so the outside view on the main monitor is no longer blurry in 8K shots.
Extras
- 50 Hz TV speed (Audio & extras page, off by default): plays like the European console on a 50 Hz TV. The game and its music run about 20 percent slower; movies are unchanged. Takes effect on the next start.
Fixes and polish
- More reliable mission detection: mission-only features such as mouse aiming and the aiming assist now use one common check for "in a mission" instead of several separate ones.
- The aspect-ratio choices on the Display page are now labelled clearly as the picture format.
How to report problems
Press F11 or F9 (or use Esc → Feedback). Describe what happened and submit the pre-filled GitHub issue. Attach the files from the feedback folder that opens alongside it.
Known issues
- White lines are not fully fixed: thin white lines/streaks still show up, especially at the edges of the map (outside the playable area), on mountains and when looking up or down. They only appear with frame rates above 30 (the in-between frames); with 30 (original) the picture is clean. alpha.6 reduced them but did not remove them – I am working on it. A report with F9 (short video) helps me a lot.
- USA version: experimental, so expect differences from the European version. The 50 Hz option is meant for the European version and has not been tested with the US release.
- Camera feels off when the terrain gets higher (Mission 9) – under investigation.
- Replays: importing replays from a real Xbox may fail, and saved replays may not show up in the game.
- Joysticks/HOTAS were developed without real hardware – please tell me how your device behaves. No axis calibration yet (use the Windows game controller calibration for now).
Steelbound 0.1.0-alpha.6
Sixth alpha – the first one for public testers. You need your own copy of Steel Battalion (Europe, PAL) as a disc image (.iso/.xiso). Setup instructions are in the README.
Thank you for testing! Things will break – please tell me. Every report helps me.
New since alpha.5
First start and launcher
- A short welcome note on first launch shows the version, the feedback keys (F11 screenshot, F9 5-second clip) and Esc for the menu.
- A small "ALPHA" watermark in the corner, so screenshots and videos are easy to place.
- Guided first-run setup, a cleaner "Ready to play" page and a polish pass over all launcher pages (English and German).
- Assign controls dialog reworked: grouped actions, clear "axis" vs. "key/button" labels, one card per action, remove single sources, deadzone/invert right where they apply.
Controls
- Mouse aiming fixed: inside the window the mouse now always controls the weapon arm during a mission – no matter how you got there – and is free in menus. F10 toggles it manually everywhere.
- Simplified controls (optional): an aiming assist with two modes – reticle at edge turns the view (the cockpit view follows when the reticle reaches the edge) and lock weapon arm (the mouse turns the cockpit view and the reticle stays centred; only at the view limit does the arm move) – plus automatic gear shifts.
- Joysticks, HOTAS and pedals (experimental): any DirectInput device can be bound alongside keyboard, mouse and gamepad. The learn mode detects the axis direction and inverts reversed axes (e.g. throttles) automatically; a live line shows raw value and result.
Display
- More frame rates: Monitor (auto), 30 (original), 60, 75, 90, 100, 120, 144, 165, 240. 120 stays the tested default.
Fixes
- Textures and shaders no longer get corrupted after several missions in a row.
- Fewer white lines/streaks at high frame rates: one cause of the flickering lines across the main monitor (mostly while turning) is fixed. Update: some lines still appear above 30 FPS (map edges, mountains, looking up/down) – see the Known issues of the newer releases; 30 (original) is clean.
- Terrain popping while turning fixed: landscape and objects at the edge of the view could vanish and reappear when turning (e.g. Mission 3 and 4). The game's visibility map was handed back a frame too late; it is now ready in the same frame.
How to report problems
Press F11 or F9 (or use Esc → Feedback). Describe what happened and submit the pre-filled GitHub issue. Attach the files from the feedback folder that opens alongside it.
Known issues
- Ground missing after looking up and down (reported once, from a replay) – I could not reproduce it with this build. If you still see it, please send a report with your save/replay files.
- Camera feels off when the terrain gets higher (Mission 9) – under investigation.
- Replays: importing replays from a real Xbox may fail, and saved replays may not show up in the game.
- Joysticks/HOTAS were developed without real hardware – please tell me how your device behaves. No axis calibration yet (use the Windows game controller calibration for now).
- Supported version: only the European PAL version for now. US (NTSC-U) support is in progress.
Steelbound 0.1.0-alpha.5
Fifth alpha. You need your own copy of Steel Battalion (Europe, PAL) as a disc image (.iso/.xiso). Setup instructions are in the README.
New since alpha.4
Feedback hotkeys
- F11: pauses the game and opens the feedback dialog with a screenshot of the current game image.
- F9: records the next 5 seconds of gameplay, then pauses and opens the feedback dialog with the clip attached.
- You can change both keys in the launcher under Controls. They also work in the VR menu.
How to report problems
Press F11 or F9 (or use Esc → Feedback). Describe what happened and submit the pre-filled GitHub issue. Attach the files from the feedback folder that opens alongside it.
Known issues
- Textures and shaders after several missions in a row: they can get corrupted. Restarting the game fixes this for now.
- Landscape near the edges of the view: it can pop in and out in some missions (for example Mission 3/4 with certain VTs).
- Replays: importing replays from a real Xbox may fail, and saved replays may not show up in the game.
- Supported version: only the European PAL version is supported for now.