Repository navigation
Steelbound 0.3.0 (Beta)
Steelbound 0.3.0 (Beta)
Line of Contact is here. With 0.3.0 everyone can play Steel Battalion: Line of Contact, the online sequel – including online matches against other pilots through our own meeting point. Line of Contact support is new and marked experimental. A big thank you to everyone who tested the early builds and sent reports!
Line of Contact (new, experimental)
- Start it from the launcher: click LINE OF CONTACT at the top, choose your own disc image (
.iso, the extracted folder or itsdefault.xbe) and press Play Line of Contact. Version 1.0 with or without the media patch works. A game with the title update applied or the Japanese Pilot Test disc gets a clear message. - Online lobbies: choose Connect to steelnet in the launcher settings (gear at the top right). Public matches show up for every pilot under Search Match, with the host's name and an estimated ping. Private lobbies give you a room code to share with friends. Line of Contact is an online game: without Connect to steelnet, Play Line of Contact stays greyed out and the launcher shows why, with a button to the settings. No account needed, you can play as a guest. If two PCs can't reach each other directly, the traffic is relayed automatically. Game traffic is encrypted end to end.
- Rollback: each mission negotiates rollback automatically. Corrections are smoothed instead of jumping, and the input delay drops by one tick whenever the connection allows it.
- Instant own movement: your own mech reacts right away in online matches. Driving, turning and dodging are shown without the network input delay, while the shared simulation stays exactly in sync.
- Snappier aiming: your crosshair and view follow the mouse on every rendered frame, and target markers, the compass band and the radar line up with your instantly shown mech (about 50 ms quicker aiming).
- Smooth opponents (new option on the Multiplayer page, default Auto): other VTs no longer jump when a network correction comes in; they are shown slightly later instead.
- Smoother picture: frame pacing no longer waits for the game's prediction step, in-between frames follow a steady clock, and with VSync on the frames line up with your monitor's refresh. You get fewer micro-stutters at 60, 120 and 144 Hz. Single-frame hitches at high refresh rates are also much rarer, because the frame pacer seldom has to wait for the game's rendering work.
- Fewer hitches when other programs are busy: on PCs with 4 or more CPU threads the game's emulation threads get a slightly higher priority, so background apps no longer steal their CPU time.
- Lockstep fallback (when a player turns rollback off): the input delay now stays close to what the connection needs (about 100 ms nearby, 150 ms across continents), and a healthy player is no longer dropped when the connection lags badly.
- Fastest route, automatically: online matches pick the fastest connection to each player (direct, EU relay or US relay) and keep measuring during the match. If another route stays clearly faster, or the current one fails, the game switches seamlessly without dropping out of sync.
- Test partner result now shows the input delay that is actually in effect, in lockstep as well as with rollback, matching the F3 panel.
- Multiplayer page in the Line of Contact tab with Match (public/private, room code), Account and Network: switch rollback, instant own movement, smooth opponents and the adaptive lower input delay on or off to compare them (all on by default).
- F3 network info: route, ping, packet loss, rollback or lockstep, input delay and smoothing. Shift+F3 moves the panel.
- Another round without restarting: after a mission everyone stays in the game; the host simply creates a new match.
- Menus run at your frame rate and need less graphics power (#57). First-time stutters while the game prepares its graphics are much shorter.
- Game speed never depends on your frame rate. I checked fire damage and timers against the console (#53): the mission runs at the console's 20 ticks per second at any frame rate.
Fixed from your reports
- Crash in a running Mission 03 (#62).
- Broken cockpit and radar textures in the second match (#60).
- Beeping that did not stop (#61), the eject alarm (#51) and the title music (#54) carrying on into the menus.
- Rubber banding at the start of a match (#58).
- Graphics settings for Line of Contact were not kept (#50).
- Thin line effects (e.g. around ejecting) were drawn too thin at high resolutions (#59, partly – a short clip helps if you still miss an effect).
- Eject works as on the console and stays in sync online.
Steel Battalion
- Tuner dial on the mouse wheel reacts immediately instead of about a second late (#63).
- Sharp HUD at higher render resolutions: compass letters, tick marks and small digits at the bottom of the main monitor are one original pixel wide again instead of thick and smeared (e.g. with "HD 2x render").
- #44 (white D3EYE in Mission 23): not reproduced yet. The F11 report now also shows when a model's extra texture layer is missing. If you see it, please press F11 while it's on screen.
- Side step on keyboard and mouse: a short tap of the side-step key now gives a real side step in the direction you press, instead of only the sound.
- The launcher accepts an extracted game folder or its
default.xbein more places and explains clearly why an image can't be used (#52).
Launcher
- Tidier launcher: the two game names at the top – STEEL BATTALION and LINE OF CONTACT – are now the game switch (the active one is underlined in orange), settings that apply to both games now sit behind the gear at the top right (online & updates, language, window size, background, test tools), a small status next to the gear shows steelnet online and new versions, and the first start asks just once: connect to steelnet, check the version only, or stay offline. The version check still only shows a hint and links to the release page – it never downloads anything.
- Own settings for each game: Steel Battalion and Line of Contact now keep separate display, graphics, control and audio settings; on the first start both begin with your previous settings. Options that don't exist in Line of Contact (such as the 50 Hz TV speed) are greyed out there with the reason, and a 16:9 picture format now shows as 16:9 everywhere in the launcher.
- Clear start button: without a disc image, Play is greyed out for both games, with the reason below and a button that takes you straight to the image selection. Hover the steelnet status next to the gear for details (reachable, response time, last check); it turns green when steelnet is online.
- Eject has a key now: Eject (handle) is bound to Shift+Delete in the standard keyboard layout, for both games (Reset to default sets it).
- Clearer account page (Line of Contact): while Multiplayer is open, the sidebar shows two sub-items, Match & network and Account. The account page tells you at a glance whether your account is secured, offers one main button when something needs doing (Connect with Discord), and groups securing, moving to another PC and sign-out/delete from top to bottom.
Still open
- #55/#56 (collision lights): the lamps are switched by the game's own logic; I am still comparing with the console.
- Please keep reporting – in the issue form choose Which game? so I know where to look.
Download
Steelbound-0.3.0-win32.zip is below. Unpack it over your existing folder or into a new one; your settings and saves stay where they are. You still need your own disc images; this download contains no game data. How to play Line of Contact: docs/LINE_OF_CONTACT.md in the download.