Skip to content

7. RESOURCE SPECIFICATION

Priyanka Chavan edited this page Sep 7, 2022 · 14 revisions

7.1 MOTOR SIZING

7.1.1 TABLE

SL.NO NAME SPECIFICATION CURRENT SPECIFICATION QUANTITY WEIGHT(GMS)
01 MICRO CONTROLLER ARDUINO MEGA 2560 50mA 01 37
02 BLUETOOTH HC05 15mA 01 25
03 DC MOTOR 30 rpm 60mA 04 1200
04 IR SENSOR -- 20mA 01 11
05 LED LIGHTS -- 10-20mA 01 7
06 ULTRASONIC SENSOR HC-SR04 15mA 01 250
07 BUZZER PIEZO BUZZER <=32mA 01 0.70

7.1.2 RPM CALCULATION

Main body :

  • V1 = volume of the main body where all the components are kept
  • V1 = lbh = 25* 25* 2 cm = 625 cm^3
  • Material used is foam sheet and hence density of foam sheet is 0.961
  • Mass of the main-body (m1)=(V1)* (density of foam sheet)
  • m1=625* 0.961=600.625 g

Upper body

  • V2 = volume of the upper body where the container is kept
  • V2 = lbh = 20* 20* 1 =400 cm^3
  • Material used is foam sheet and hence density of foam sheet is 0.961
  • Mass of the main-body (m2)=(V2)* (density of foam sheet)
  • m2=400*0.961= 384.4g

DC motor

  • Mass of the DC motor=300g
  • 4 DC motors are used
  • Hence mass (m3)=4* 300=1200g

Load

  • Load is the object that we place on the bot
  • the minimum load considered here is 10g
  • m4=10g

Arduino

  • Mass of Arduino = m5 = 37g

IR sensor

  • Mass of IR sensor =m6 = 11g

Bluetooth

  • Mass of Bluetooth = m7 = 25g

LED

  • Mass of LED = m8 = 7g

Ultrasonic sensor

  • Mass of Ultrasonic sensor = m9 = 250 g

Breadboard

  • Mass of Breadboard = m10 = 79g

Buzzer

  • Mass of Buzzer = m11 = 0.70g

Shafts

  • V12 = volume of the upper body where the container is kept
  • V12 = lbh = 5 * 12 * 0.2 =12 cm^3
  • No. of shafts used = 8
  • Material used is acrylic sheet and hence density of acrylic sheet is 1.18
  • Mass of the shaft (m12)=(V12)* (density of acrylic sheet) * (No. of shafts)
  • m12 = 12 * 1.18 * 8 = 113.28g

Container

  • Mass of the container=590g

Wheel

  • Diameter of the Wheel = 6.5 cm
  • Radius of the wheel = 3.25 cm

Gear

  • Mass of the gear (m13) = mass of one gear * No. of gears used
  • m13 = 50 * 28 = 1400g

Rod

  • Diameter of the rod (d)= 0.8 cm
  • Radius of the rod (r) = d/2 = 0.8/2 = 0.4 cm
  • Required height of the rod (h)= 7.5 cm
  • Volume of rod(V14) = pi * r^2 * h
  • V14 = 3.142 * 0.4 * 0.4 * 7.5 = 3.768 cm^3
  • Density of steel is 7.85
  • No. of rods used are 4
  • Mass of the rods (m14) = V14 * density of steel * No. of rods used
  • m14 = 3.768 * 7.85 * 4 = 118.3152g

Total mass (m-total)

  • m-total = m1 + m2 + m3 + m4 + m5 + m6 + m7 + m8 + m9 + m10 + m11 + m12 + m13 + m14
  • m-total = F = 600.625 +384.4 + 1200 +10 + 37 + 11 + 25 + 7 + 250 + 79 + 0.70 + 113.28 + 590 + 1400 + 118.3152 = 4826.32g = 4.82632 kg
  • torque(t) = F * r = 4.82632 * 3.25 = 15.685 kg-cm
  • Total torque = t * FOS = 15.685 * 1.5 = 23.528 kg-cm
  • Torque on individual motors = 23.528/4 = 5.882 kg-cm

Motor selected for the motion of the bot = 30 rpm


7.1.3 ADAPTOR POWER CALCULATION

  • I = 400mA * Number of Motors * FOS = 400mA * 4 * 1.5 = 2400 mA

  • I = 2.4 A

  • As per the calculations, We use Power Adapter of Specifications : 12V-2A

Clone this wiki locally