Repository navigation
6. Motor Sizing
Abhiramsk1103 edited this page Sep 7, 2022
·
44 revisions
| Sl.no | Name of items | specification | current specification | Quantity | Weight |
|---|---|---|---|---|---|
| 1. | IR sensor | - | 20mA | 2 | 5.06g without cable/7.88g with cable |
| 2. | Ultrasonic sensor | - | 15mA | 1 | 250g |
| 3. | Buzzer(magnetic) | - | 20mA | 1 | 1.6g |
| 4. | Servo motor | Tower pro MG90S | 600mA | 2 | 9g without hinges/60g with hinges |
| 5. | Arduino | Arduino mega 2560 | 250mA | 1 | 25g |
| 6. | Motor driver | l298n | 2A | 1 | 20g |
| 7. | Motor | 60 RPM High Torque Side Shaft DC Geared Motor | 300mA | 2 | 125g |
| 8. | RFID scanner | RC522 RFID 13.56MHZ Reader Writer Module | 26mA | 1 | 50g |
| 9. | LCD Display | 1602 (16x2) LCD Display with I2C/IIC interface - Blue Backlight | 1mA | 1 | 100g |
| 10. | Light strip | RGB Light strip | 10mA | 20 g |
| Materials/Components | Dimensions(in mm) | Quantity |
|---|---|---|
| Foam sheet | 300x300x5 250x300x5 |
1 3 |
| Acrylic sheet | 150x300x5 400x100x5 350x100x5 |
2 4 2 |
| Components | Mass(in kg) | Quantity |
|---|---|---|
| Foam sheet | 0.0756 | included |
| Acrylic sheet | 1.888 | included |
| IR sensor | 0.00506 | 2 |
| Ultrasonic sensor | 0.25 | 1 |
| Buzzer | 0.0016 | 1 |
| Servo motor | 0.06 | 2 |
| Arduino | 0.025 | 1 |
| Relay | 0.061 | 2 |
| LCD display | 0.03 | 1 |
| RFID scanner | 0.05 | 1 |
Total mass=3.6774 kg
r=5cm , FOS=1.5 .
T=F * r * FOS
FOS=1.5
T=27.5800 kg cm.
T/2=13.79 kg cm.
Total mass=3.6774 kg + 1 kg = 4.6774 kg.
r=5cm , FOS=1.5.
F=total mass * 9.8
T=F * r * FOS
T=35.0055 kg cm.
T/2=17.50275 kg cm.
Total mass=0.2655 kg
radius=2 cm
F=total mass*9.8
F=2.6019 N
T=FFOSr
T=0.8 Kg/cm
Torque needed=17.50275 Kg/cm
Motor Selected=60 RPM High Torque Side Shaft DC Geared Motor
Torque needed=0.8 Kg/cm
Servo motor selected=Tower pro MG90S.
| Component | Voltage required | Current needed | Quantity |
|---|---|---|---|
| DC motor | 12v | 2A | 2 |
| Servo motor | 5v | 600mA | 2 |
| RFID scanner | 5v | 26mA | 1 |
| IR sensor | 5v | 20mA | 2 |
| Ultrasonic Sensor | 5v | 12mA | 1 |
| LCD Display | 5v | 1mA | 1 |
| Buzzer | 5v | 20 mA | 1 |
| Light strip | 5v | 10mA | 2 |
| l298n motor driver | 5v | 2A | 1 |
| Arduino mega | 5v | 100mA | 1 |
Operating voltage=5v for components 12V for motors
Operating Current= 1410*1.2=1692=nearly 2000 mA for components 2 A for motors
using an external power suppply of 4 cells to produce 6v for bluetooth