Repository navigation
7. Resource Specifications
Risheek-H edited this page Aug 4, 2022
·
9 revisions
Total Mass, m = 7.792Kg
Weight = m*g
= 7.792 * 9.81 / 9.81
= 7.792 N
F = [Fa + mg (sin ɸ + µ cos ↀ)]FOS
= [1.5 + 7.792( 0 + 0.6(1))]1.5
= [1.5 + 4.6752]1.5
F = [6.1752]1.5
F = 9.2628 Kg
T = F*r
= 9.2628 * 3.25
T = 30.1041 Kg-cm---- Total
If we use 2 actuators
Torque on each Actuator is
T = 30.1041 / 2
T = 15.052 kg-cm----Torque on each Motor
As per our calculations, we are going to use DC side shaft motor of 30 rpm.
I = 800mA * Number of Motors * FOS
= 800mA * 2 * 1.2
= 1920 mA
I = 1.92A
As per our calculations, We are going to use Power Adapter of Specifications 12V-2A
| SL.NO | Name | Specifications | Current Specification | Quantity | Weight(gms) | Net Weight(gms) |
|---|---|---|---|---|---|---|
| 1 | Side shaft DC Motor | 30rpm | 800mA | 2 | 300 | 600 |
| 2 | Power Adapter | 12V | 2A | 1 | 130 | 130 |
| 3 | IR-sensor | operating voltage(3.6V to 5V) | 20mA | 2 | 15 | 30 |
| 4 | Load-sensor | Force range(100gms to 10kgs) | 200mA | 1 | 360 | 360 |
| 5 | Motor driver | operating voltage(4.5V to 5.5V) , Max Power consumptions (20Watt) | 36mA | 1 | 25 | 25 |
| 6 | LED Strips | 12Watt | 5mA | 1 | 10 | 10 |
| 7 | LED | operating voltage(3V) | 20mA | 2 | 2 | 4 |
| 8 | Buzzer | operating voltage(5V) | <=32mA | 1 | 20 | 20 |
| 9 | camera | operating voltage(1.3V) | 10mA | 1 | 3 | 3 |
| 10 | Microcontroller | Arduino Mega 2560 , operating voltage (7V to 12V) | 20mA to 50mA | 1 | 37 | 37 |
| 11 | Servo | |||||
| Total Weight | 1089gms |