Repository navigation
(1) What is this project about.
In the summer of 2016, I spent some vacation days in Puerto Rico, and I couldn't resist the temptation of visiting Arecibo.
That trip brought my mind back to the '90s and to my first Moon bounce experience, during which I heard W5UN's CW 144 MHz reflections with a simple 9 elements, no elevation: what a thrill!
I thought the time was coming to start my journey to the moon. I collected and read any possible article and note, a great learning experience.
I was eventually ready to give it a try, setting up a very modest but optimized 432 MHz QRP station with an IC-7100 and one 12-element M2.
It was a success (thanks to NC1I..)
Being a QRP effort, optimization is paramount.
On 432MHz, optimization goes along with dealing with spatial offset and Faraday rotation.
I added a second 12-element M2 with a rotational system that allowed me to use one antenna for RX and one for TX with separate polarizations. The antennas were controlled by just turning the motors on and off.
To further improve my "removable backyard" system, I replaced the M2s with 2x15LFA homebrewed, keeping the same rotation system.
One more step in the optimization process has been coupling the 2 antennas but, to keep using the advantages of the rotational system, I needed a smarter controller, capable of rotating the antennas separately, together, to predefined angles, back and forth from the best RX angle to the Faraday compensated TX angle.
This is what the FaraRotation Arduino project does!