Skip to content

IPRO SDK V2.3.1

Latest

Choose a tag to compare

@RexhuangTW RexhuangTW released this 13 Nov 17:39

IPRO7 / IPRO7AI and IPRO6S patch release: OTA for IPRO6S applications and the wake-up reason of a timed IPRO6S sleep. Use it with IPRO Workbench 0.3.0 (https://github.com/INTELPRO-INC/ipro-workbench/releases/tag/v0.3.0) and IntelProCube 0.7.0.1 or later.

Download Size SHA-256
IPRO-SDK-V2.3.1.tar.gz 165.8 MB a23a03f461ac31632a4655eee4828ee05e4220656f32ac8183dd5fd38f316806

New:

  • OTA for IPRO6S applications. apps/platform/ipro6_demo has the configuration
    defconfig_ipro6_lpwifi_ota: the Wi-Fi station of defconfig_ipro6_lpwifi
    with the OTA component and its ota_uart command on the console UART (UART0,
    GPIO28/29). Flash it with boot2 and IntelProCube's own 2 MB table
    (chips/ipro6/partition/partition_cfg_2M.toml, IntelProCube 0.7.0.1 or later:
    FW slot A 1200 KB, slot B 736 KB); a package then goes to FW slot B and boot2
    installs it. tools/create_ota.py makes IPRO6 packages with
    --hw-ver IPRO6_M_V1.0; components/sys/ipro_ota/README.md has an IPRO6
    section. IPRO Workbench 0.3.0 makes and sends these packages.

Fixed:

  • IPRO6S: the wake-up reason of a timed PDS sleep. A timed sleep while not
    joined to an access point reported the wake-up reason as 0x0 (UNKNOWN); it
    is now 0x1 (RTC) (ipro6_demo's lp sleep, IPRO Workbench 0.3.0's Low Power page).

Everything else is as in V2.3.0: see its release notes.

Upgrading from V2.3.0: unpack the new package and rebuild your applications.

Validation:

  • The package's own build check: 37 FreeRTOS applications build from this
    package (ipro_agora_sentino once AOSL is fetched), every shipped IPRO6S
    defconfig (8, with defconfig_ipro6_lpwifi_ota) builds, and the Zephyr sample
    matrix and twister --build-only build for ipro7_evb and ipro7ai_evk.
  • Against V2.3.0, member by member: the prebuilt archives differ only in the
    IPRO6S low-power HAL (hal_lp.c, the fix above) and the Wi-Fi library's build
    date. The IPRO7 / IPRO7AI archives are the same code as in V2.3.0.
  • On an IPRO6S EVK, with IPRO Workbench 0.3.0 and IntelProCube 0.7.0.1:
    ipro6_demo (defconfig_ipro6_lpwifi_ota) built from this package and
    flashed with boot2 and partition_cfg_2M.toml booted; a timed 1 s sleep woke
    with reason 0x1 (RTC); a 600 KB OTA package sent with ota_uart in 65 s was
    checked by the board and installed by boot2, and the new firmware started.