Skip to content

Releases

ConstructionBuilder 0.26.0

Choose a tag to compare

@Ivanou-Dzmitry Ivanou-Dzmitry released this 18 Nov 18:39

Install: Blender 5.2+, Edit > Preferences > Get Extensions > Install from Disk, pick the zip. / Установка: Blender 5.2+, Edit > Preferences > Get Extensions > Install from Disk, выберите zip.

Includes 0.23.0 - 0.25.0 (published together). / Включает 0.23.0 - 0.25.0 (выпущены вместе).

0.26.0

English

  • Debris is no longer removed from the podium floor: with Podium on, floor 1 gets its debris boxes like every other floor (before, debris started from floor 2 and the tall first storey was empty). Walls and railings still start from floor 2. Without a podium the geometry did not change (bit-for-bit comparison, 45 of 45 objects).

Русский

  • Мусор больше не убирается с этажа стилобата: при включённом Podium на этаже 1 стоят боксы мусора, как на остальных этажах (раньше мусор начинался со 2-го этажа, и высокий первый этаж был пустым). Стены и ограждения по-прежнему начинаются со 2-го этажа. Без стилобата геометрия не изменилась (побитовое сравнение, 45 из 45 объектов).

0.25.0

English

  • Foot Depth (Foot Depth in Columns, 0.5 m by default, 0 = as before): the columns used to start exactly at Z = 0, on top of the ground slab, and looked as if they hung above the ground. Now they go 0.5 m below the ground, through the ground slab (0.3 m thick by default). Columns still have no bottom face. Only the column meshes change (they are longer by Foot Depth); with Foot Depth = 0 the geometry did not change (bit-for-bit comparison, 45 of 45 objects).

Русский

  • Заглубление колонн (Foot Depth в Columns, по умолчанию 0.5 м, 0 = как раньше): колонны начинались ровно на Z = 0, на плите на земле, и казалось, что они висят над землёй. Теперь они уходят на 0.5 м под землю, сквозь плиту на земле (по умолчанию толщиной 0.3 м). Нижней грани у колонн по-прежнему нет. Меняются только меши колонн (длиннее на Foot Depth); при Foot Depth = 0 геометрия не изменилась (побитовое сравнение, 45 из 45 объектов).

0.24.0

English

  • Randomness (Randomness in Formwork Props, 0.4 m by default, 0 = perfect grid): the props no longer stand in a perfect grid. Every prop moves by a random distance up to this value, and every row of props moves with its timber beam, so the heads still lie under a beam. Props keep clear of the corner columns and stay inside the building (the tripod legs are counted, so the margin from the module edge is about 0.55 m). Seeded, so a Rebuild repeats it; the steel and the timber agree. With Randomness = 0 the geometry did not change (bit-for-bit comparison, 45 of 45 objects).

Русский

  • Разброс (Randomness в Formwork Props, по умолчанию 0.4 м, 0 = идеальная сетка): стойки больше не стоят идеальной сеткой. Каждая стойка сдвигается на случайное расстояние до этого значения, а каждый ряд стоек сдвигается вместе со своей деревянной балкой, так что головки по-прежнему лежат под балкой. Стойки держатся подальше от угловых колонн и остаются внутри здания (раскосы треноги учитываются, поэтому отступ от края модуля около 0.55 м). С зерном, Rebuild повторяет результат; сталь и дерево согласованы. При Randomness = 0 геометрия не изменилась (побитовое сравнение, 45 из 45 объектов).

0.23.0

English

  • Auto Name (Auto Name, on by default): every Rebuild writes the file name from the building into the File field: c + floors + _ + modules X-Y + _ + shape (R, L or U), for example c10_8-8_L. You can still edit the name by hand after a Rebuild; turn the checkbox off to keep your own name. The FBX and the ID mask (<name>_ID.png) get this name.

Русский

  • Авто-имя (Auto Name, по умолчанию вкл.): каждый Rebuild записывает в поле File имя файла по зданию: c + этажи + _ + модули X-Y + _ + форма (R, L или U), например c10_8-8_L. После Rebuild имя можно поправить руками; чтобы сохранить своё имя, выключите галку. Это имя получают FBX и ID-маска (<имя>_ID.png).

ConstructionBuilder 0.22.0

Choose a tag to compare

@Ivanou-Dzmitry Ivanou-Dzmitry released this 18 Nov 18:12

Install: Blender 5.2+, Edit > Preferences > Get Extensions > Install from Disk, pick the zip. / Установка: Blender 5.2+, Edit > Preferences > Get Extensions > Install from Disk, выберите zip.

0.22.0

English

  • Unfinished part (Unfinished Part, Side, Width, Missing Floors; off by default): one side of the building is lower, as if the rest has already risen and this part is not built yet. Side is +X / -X / +Y / -Y, Width is how many module rows on that side are lower, Missing Floors is how many storeys they lack. It works for any shape: the legs of a U or the arm of an L can stay low while the bar goes up.
  • The lower part has no upper slabs, walls, stairs, shafts, lamps, debris or railings above its own roof. Its columns stand at the roof height with the rebar sticking out, its formwork props are under its own top slabs, its railings fence its roof and every step edge of the taller part, its shafts and stairs end at its roof. A wall between a low and a tall module is as high as the low one.
  • At least one storey and at least one module row always keep full height, whatever the numbers say.
  • Without the option the geometry did not change (bit-for-bit comparison, 45 of 45 objects). 11 configurations are tested (RECT, L, U, podium, 1 floor, all sides): nothing stands above the roof of the lower part, the ID mask has no wrong polygon, the UVs stay in the tile.

Русский

  • Недостроенная часть (Unfinished Part, Side, Width, Missing Floors; по умолчанию выкл.): одна сторона здания ниже, как будто остальное уже выросло, а эта часть ещё не построена. Side это +X / -X / +Y / -Y, Width сколько рядов модулей с этой стороны ниже, Missing Floors сколько этажей им не хватает. Работает для любой формы: ноги П или рукав Г могут остаться низкими, пока перемычка идёт вверх.
  • В низкой части нет верхних плит, стен, лестниц, шахт, ламп, мусора и ограждений выше её собственной крыши. Колонны стоят до высоты её крыши с торчащей арматурой, стойки опалубки стоят под её собственными верхними плитами, ограждения идут по её крыше и по каждому краю ступеньки высокой части, шахты и лестницы кончаются на её крыше. Стена между низким и высоким модулем такой же высоты, как низкий.
  • Хотя бы один этаж и хотя бы один ряд модулей всегда остаются полной высоты, какие бы числа ни ввели.
  • Без этой опции геометрия не изменилась (побитовое сравнение, 45 из 45 объектов). Проверено 11 конфигураций (RECT, Г, П, стилобат, 1 этаж, все стороны): над крышей низкой части ничего нет, в ID-маске нет неверных полигонов, UV остаются в тайле.

ConstructionBuilder 0.21.0

Choose a tag to compare

@Ivanou-Dzmitry Ivanou-Dzmitry released this 18 Nov 14:49

Install: Blender 5.2+, Edit > Preferences > Get Extensions > Install from Disk, pick the zip. / Установка: Blender 5.2+, Edit > Preferences > Get Extensions > Install from Disk, выберите zip.

0.21.0

English

  • Cut Height (Cut Height, 30 m by default, 0 = off): the UVs of tall objects, first of all the columns over all floors, are cut every 30 m. A very tall island (39 m on 12 floors) used to limit the scale of the whole tile and left a free strip at the top. A building lower than 30 m (up to 9 floors of 3 m) is not cut at all, nothing changes for it (bit-for-bit comparison, 45 of 45 objects). To make the cut possible a column taller than 30 m gets an edge loop at 30 m (one polygon per side could not be cut). 12 floors: scale 0.0255 -> 0.0286 (+12%).

Русский

  • Высота разреза (Cut Height, по умолчанию 30 м, 0 = выкл.): UV высоких объектов, прежде всего колонн на все этажи, режутся через каждые 30 м. Очень высокий островок (39 м на 12 этажах) раньше ограничивал масштаб всего тайла и оставлял свободную полосу сверху. Здание ниже 30 м (до 9 этажей по 3 м) не режется совсем, для него ничего не меняется (побитовое сравнение, 45 из 45 объектов). Чтобы разрез был возможен, колонна выше 30 м получает пояс рёбер на 30 м (одну грань на сторону резать нельзя). 12 этажей: масштаб 0.0255 -> 0.0286 (+12%).

0.20.1

English

  • The default UV Margin is 0.005 (was 0.01): islands sit closer, the scale grows (9 x 5 x 6 building: 0.0301 -> 0.0333 tile per metre, +11%). On a tall building the scale is capped by the tallest island (a column over all floors, 39 m on 12 floors), so a smaller gap gives only +4% there.

Русский

  • UV Margin по умолчанию 0.005 (было 0.01): островки лежат ближе, масштаб растёт (здание 9 x 5 x 6: 0.0301 -> 0.0333 тайла на метр, +11%). У высокого здания масштаб ограничен самым высоким островком (колонна на все этажи, 39 м на 12 этажах), поэтому там меньший зазор даёт только +4%.