Skip to content

ConstructionBuilder 0.26.0

Choose a tag to compare

@Ivanou-Dzmitry Ivanou-Dzmitry released this 18 Nov 18:39
· 2 commits to main since this release

Install: Blender 5.2+, Edit > Preferences > Get Extensions > Install from Disk, pick the zip. / Установка: Blender 5.2+, Edit > Preferences > Get Extensions > Install from Disk, выберите zip.

Includes 0.23.0 - 0.25.0 (published together). / Включает 0.23.0 - 0.25.0 (выпущены вместе).

0.26.0

English

  • Debris is no longer removed from the podium floor: with Podium on, floor 1 gets its debris boxes like every other floor (before, debris started from floor 2 and the tall first storey was empty). Walls and railings still start from floor 2. Without a podium the geometry did not change (bit-for-bit comparison, 45 of 45 objects).

Русский

  • Мусор больше не убирается с этажа стилобата: при включённом Podium на этаже 1 стоят боксы мусора, как на остальных этажах (раньше мусор начинался со 2-го этажа, и высокий первый этаж был пустым). Стены и ограждения по-прежнему начинаются со 2-го этажа. Без стилобата геометрия не изменилась (побитовое сравнение, 45 из 45 объектов).

0.25.0

English

  • Foot Depth (Foot Depth in Columns, 0.5 m by default, 0 = as before): the columns used to start exactly at Z = 0, on top of the ground slab, and looked as if they hung above the ground. Now they go 0.5 m below the ground, through the ground slab (0.3 m thick by default). Columns still have no bottom face. Only the column meshes change (they are longer by Foot Depth); with Foot Depth = 0 the geometry did not change (bit-for-bit comparison, 45 of 45 objects).

Русский

  • Заглубление колонн (Foot Depth в Columns, по умолчанию 0.5 м, 0 = как раньше): колонны начинались ровно на Z = 0, на плите на земле, и казалось, что они висят над землёй. Теперь они уходят на 0.5 м под землю, сквозь плиту на земле (по умолчанию толщиной 0.3 м). Нижней грани у колонн по-прежнему нет. Меняются только меши колонн (длиннее на Foot Depth); при Foot Depth = 0 геометрия не изменилась (побитовое сравнение, 45 из 45 объектов).

0.24.0

English

  • Randomness (Randomness in Formwork Props, 0.4 m by default, 0 = perfect grid): the props no longer stand in a perfect grid. Every prop moves by a random distance up to this value, and every row of props moves with its timber beam, so the heads still lie under a beam. Props keep clear of the corner columns and stay inside the building (the tripod legs are counted, so the margin from the module edge is about 0.55 m). Seeded, so a Rebuild repeats it; the steel and the timber agree. With Randomness = 0 the geometry did not change (bit-for-bit comparison, 45 of 45 objects).

Русский

  • Разброс (Randomness в Formwork Props, по умолчанию 0.4 м, 0 = идеальная сетка): стойки больше не стоят идеальной сеткой. Каждая стойка сдвигается на случайное расстояние до этого значения, а каждый ряд стоек сдвигается вместе со своей деревянной балкой, так что головки по-прежнему лежат под балкой. Стойки держатся подальше от угловых колонн и остаются внутри здания (раскосы треноги учитываются, поэтому отступ от края модуля около 0.55 м). С зерном, Rebuild повторяет результат; сталь и дерево согласованы. При Randomness = 0 геометрия не изменилась (побитовое сравнение, 45 из 45 объектов).

0.23.0

English

  • Auto Name (Auto Name, on by default): every Rebuild writes the file name from the building into the File field: c + floors + _ + modules X-Y + _ + shape (R, L or U), for example c10_8-8_L. You can still edit the name by hand after a Rebuild; turn the checkbox off to keep your own name. The FBX and the ID mask (<name>_ID.png) get this name.

Русский

  • Авто-имя (Auto Name, по умолчанию вкл.): каждый Rebuild записывает в поле File имя файла по зданию: c + этажи + _ + модули X-Y + _ + форма (R, L или U), например c10_8-8_L. После Rebuild имя можно поправить руками; чтобы сохранить своё имя, выключите галку. Это имя получают FBX и ID-маска (<имя>_ID.png).