Skip to content

Even Realities G1 BLE Protocol

Jump to bottom
John Thomas edited this page Dec 1, 2025 · 9 revisions

The Even Realities G1 operates with two BLE radios, one for the left side and one for the right. Some commands need to be sent individually to both sides and some are only sent to one side. Each radio operates as a stream of packets using the Nordic BLE UART.

TODO: Describe the NRF UART BLE UUIDs TODO: Explain Global Sequence

Operations

Display Image Full Screen

TODO

Display Image On Dashboard

TODO

Display Text Full Screen

TODO

Display Text On Dashboard

TODO

AI Dictation and Response

TODO

Create and Display Quick Note

TODO

Navigation Full Screen

TODO

Notifications

TODO

Record Audio

TODO

User Defined Action on Double Tap

TODO

Scroll Text Full Screen

The official app uses this for the teleprompter feature, but it can scroll any text such as a news feed or an ebook.

Display Calendar on Dashboard

TODO

Display Graph on Dashboard

The official app uses this for Stocks, but it can be used for anything, for example heart rate over time or blood glucose levels.

Messages

These are messages the glasses will send to the app unprompted when an event happens or they want to put the status in.

Status (0x22)

These messages come when certain events happen on the glasses. See: Dashboard Set (0x06) for the Dashboard and Pane modes.

Sent when the user looks up.

Header Size ?? ?? Event? Num Unread Low Power Dashboard Mode Pane Mode Pane Page Number
22 0A 00 00 01 00 ~ FF 00 / 01 00 ~ 02 00 ~ 05 01 ~ 04

Sent when the user taps the right side while looking up.

Header Size ?? ?? Event? Dashboard Mode Pane Mode Pane Page Number
22 08 00 00 02 00 ~ 02 00 ~ 05 01 ~ 04

Audio (0xF1)

A continuous Audio Stream sent when the user looks up and Head Up Microphone is enabled or the Microphone is manually enabled. See: Activate Microphone on Head Lift Settings (0x08) and Microphone Set (0x0E). The Audio Sequence is different from the Global Sequence, and will reset each time the microphone is enabled or disabled.

Header Audio Sequence Audio Data (LC3)
F1 00 ~ FF XX XX ...

Debug (0xF4)

The glasses send debug messages when debugging mode is enabled.The message is a null terminated ASCII string. See Debug Mode Set (0x23 0x6C)

Header Message
F4 Null Terminated ASCII Data.\0

Event (0xF5)

Header Sub Payload Description
F5 00 TouchPad Double Tap
F5 01 TouchPad Single Tap
F5 02 Head Up
F5 03 Head Down
F5 04 TouchPad Triple Tap
F5 05 TouchPad Triple Tap
F5 06 Worn
F5 07 Not worn / Not in case
F5 08 In Case / Lid open
F5 09 00 / 01 Glasses side charging
F5 0A 00 ~ 64 Glasses side battery level
F5 0B In case / Lid closed / Case plugged in
F5 0C
F5 0D
F5 0E 00 / 01 Case charging
F5 0F 00 ~ 64 Case battery level
F5 10
F5 11 BLE Paired Success?
F5 12 Right TouchPad pressed, held and released
F5 17 Left TouchPad pressed and held
F5 18 Left TouchPad pressed Released
F5 19
F5 1A
F5 1B
F5 1C
F5 1D
F5 1E Open Dashboard (double tap)
F5 1F Close Dashboard (double tap)
F5 20 Double tap either side when set to translate or transcribe

Commands

Commands are messages the App can send to the glasses. The glasses may optionally respond.

Generic Command Response

Many commands will simply respond with a generic success/failure message. The header will repeat the command id back, and one additional byte which will be either success or failure. This is recorded here and referenced by all commands that operate this way to avoid duplicating the same response for all such messages.

Command Subcommand Description
XX C9 Success
XX CA Failure
XX CB Continue data

Anti Shake Get (0x2A)

This is not used by the stock app. TODO

Bitmap Show (0x16)

Shows a previously uploaded file as a bitmap on the screen. The image file must be uploaded before it can be displayed. See: File Upload (0x15)

Command File ID CRC
16 0D 0E

The crc value is calculated using Crc32Xz big endian, combined with the bmp picture storage address and picture data.

Bitmap Hide (0x18)

Clears the screen of bitmaps. Also clears text? TODO

Brightness Set (0x01)

Adjust the brightness level or enable/disable auto brightness. Send to Right side. Response is generic.

Command Brightness Auto
01 00 ~ 2A 00 / 01

Brightness Get (0x29)

Fetches the current screen brightness. Send to Right side.

Command
29

Response

Header ?? Brightness Value Auto brightness Enabled
29 65 00 ~ 2A 00 / 01

Dashboard Set (0x06)

Send settings to control the dashboard. The length includes full packet length, including the command, length, pad, sequence and subcommand payload. Subcommands are listed below with their payloads.

Command Length Pad Sequence
06 XX 00 00 ~ FF
Subcommand Payload
XX XX XX XX ...

Response

Command Request Length Pad Sequence Subcommand Chunk Count Pad Chunk Pad Success
06 XX 00 00-FF XX 01 ~ FF 00 01 ~ FF 00 00 / 01

Time and Weather Set (0x01)

Command Length Pad Sequence
06 16 00 00 ~ FF
Subcommand Epoch Time 32bit (s) Epoch Time 64bit (ms) Weather Icon ID Temp C C/F 24H/12H ??
01 XX XX XX XX XX XX XX XX XX XX XX XX 01-10 XX 00/01 00/01 00

Weather Set (0x02)

TODO: This is just a guess

Command Length Pad Sequence
06 08 00 00 ~ FF
Subcommand Weather Icon ID Temp C C/F
02 01-10 XX 00/01

Weather Icon IDs

Icon ID Description Icon ID Description
00 None 09 Snow
01 Night 0A Mist
02 Clouds 0B Fog
03 Drizzle 0C Sand
04 Heavy Drizzle 0D Squalls
05 Rain 0E Tornado
06 Heavy Rain 0F Freezing
07 Thunder 10 Sunny
08 Thunder Storm 11+ Error

Pane Mode Set (0x06)

Set the dashboard mode, currently has three modes: minimal, dual, full

Command Length Pad Sequence
06 07 00 00 ~ FF
Subcommand Mode ID Secondary Pane ID
06 00 ~ 02 00 ~ 05

Dashboard Mode IDs

Mode ID Description
00 Full
01 Dual
02 Minimal

Secondary Pane IDs

Only respected on Full or Dual Mode

Secondary Pane ID Description
00 Notes
01 Stock (graph)
02 News
03 Calendar
04 Map
05 + Empty

Pane Calendar Set (0x03)

Sets the data to be shown on the calendar pane of the Dashboard.

Command Length Pad Sequence
06 XX 00 00 ~ FF
Subcommand Chunk Count Pad Chunk Pad ?? Number of Events Events...
03 01 ~ FF 00 01 ~ FF 00 01 03 03 XX XX XX ...

Chunk Indexes at 1 not 0 for this command.

Each event entry will be composed of three strings that will take up two lines in the calendar. The official app uses Text 01 as the Title, Text 02 as the time, and Text 03 as the location.

Text (01)
Text (02) Text (03)

The event entries are sent in a list of entries each with three strings. Each string can have a length of 0 to indicate the field is blank.

Text Len Value(ASCII) Text Len Value(ASCII) Text Len Value(ASCII)
01 01~FF XX XX ... 02 01 ~ FF XX XX ... 03 01~FF XX XX ...

Pane Stock Set (0x04)

TODO

Command Length Pad Sequence
06 XX 00 00 ~ FF
Subcommand Chunk Count Pad Chunk Pad
04 01 ~ FF 00 01 ~ FF 00

Pane News Set (0x05)

TODO

Command Length Pad Sequence
06 XX 00 00 ~ FF
Subcommand Chunk Count Pad Chunk Pad
05 01 ~ FF 00 01 ~ FF 00

Pane Map Set (0x07)

TODO

Command Length Pad Sequence
06 XX 00 00 ~ FF
Subcommand Chunk Count Pad Chunk Pad
07 01 ~ FF 00 01 ~ FF 00

Send Arrow Data

TODO

Dashboard Calendar Next Up Set (0x58)

Sets the calendar event displayed below the clock then the dashboard is in Full Mode.

TODO

Dashboard Quick Note Set (0x1E)

TODO

File Upload (0x15)

TODO

File Upload Complete (0x20)

Also used to upgrade a font, it seems. TODO

Hardware Set (0x26)

Response

Header Packet size Pad Seq SubCommand Success
26 06 00 00-FF XX C9/CA

Subcommands

Subcommand ID Description
01 Set something to 1
02 Set Display Height and Depth
03 give mic_transm_sem
04 ble set lum gear
05 Set Double Tap Action
06 ble set lum coeffic
07 Enable/Disable Long Press Action
08 Set Activate Mic on Head Up

Height and Depth (0x02)

Control the display’s height and depth. Must be called twice, first with the preview bit set to 1, and then a few seconds later with the bit set 0. The glasses will stay on permanently until the preview=0 command is sent, or if the preview=1 is not sent, the glasses will reject the setting.

Header Packet size Pad Seq SubCommand Preview Height Depth
26 08 00 00-FF 02 00/ 01 00-08 01-09

Button Double Tap Settings (0x06)

Header Packet size Pad Seq SubCommand Action
26 06 00 00-FF 04 XX
Actions
Action ID Description
00 None (Close Active Feature)
01
02 Open Translate
03 Open Teleprompter
04 Show Dashboard
05 Open Transcribe

Button Long Press Settings (0x07)

Header Packet size Pad Seq SubCommand Enable/Disable
26 06 00 00-FF 07 00 / 01
Actions
Action ID Description
00 Disabled
01 Enabled

Activate Microphone on Head Lift Settings (0x08)

Enables or Disables streaming audio to the phone when the head is lifted..

Header Packet size Pad Seq SubCommand Enable/Disable (inverted)
26 06 00 00-FF 08 01 / 00

Hardware Get (0x3F)

TODO See: Button Double Tap Settings (0x06)

05 Get Double Tap Action
06 Get ble set lum coeffic
07 Get Enable/Disable Long Press Action
08 Get Activate Mic on Head Up

Hardware Display Get (0x3B)

Fetches the current screen height and depth values. Send to Right side.

Command
3B

Response

Header Success Height Depth
3B C9 00 ~ 08 01 ~ 09

Head Up Angle Set (0x0B)

Sets the angle at which the display turns on when the wearer looks up. Send to Right side. Response is generic

Header Angle Level?
0B 00 ~ 3C 01 ?

Head Up Action Set (0x08)

Sets what happens when the user lifts their head up. Send to Both sides. Response is generic If the Local / Global is set to 03, the command can be sent to just the left and left will forward to the right? If set to 04, the command sends to both?

Header Packet size Pad Seq Local / Global Action
08 06 00 00-FF 03 / 04 00 / 02

Modes

Action ID Action
00 Show the Dashboard
01 ??
02 Do Nothing

Head Up Angle Get (0x32)

Send to Right side.

Command
32

Response

Header Success Angle
32 C9 00 ~ 42

Head Up Calibration Control (0x10)

Set or clear the base horizontal head up angle. Response is generic TODO

Subcommands

TODO

Subcommand ID Description
01 Clear
02 Set

Info Battery and Firmware Get(0x2C)

Get some basic info about the device.

Command Subcommand
2C 01 / 02

Response

Header Model (ASCII) Left Battery Right Battery ?? L Major Version L Minor Version L Sub Version R Major Version R Minor Version R Sub Version
2C A / B 00~64 00 ~ 64 00 00 00 01 06 03 01 06 03

Info MAC Address Get (0x2D)

TODO

Info Serial Number Lens Get (0x33)

Fetches the Serial number of the individual lens.

Command
33

Response

Response is ASCII

Header Magic ASCII Payload
33 (“3”) 33 (“3”) 47 31 52 31 45 4b 54 30 39 39 03

Info Serial NumberGlasses Get (0x34)

Fetched the Serial number of the Glasses.

Command
34

Response

Response is ASCII

Header Magic Frame Type Frame Color ID
34 (“4”) 34 (“4”) SXXX LXX LXXXXXX

The serial number can be fetched from the BLE Scan Result object. For example:S110LAAL103842 The first 4 characters indicate the frame shape.

Frame Code Description
S100 A Round
S110 B Square

The next 3 characters indicate the color of the frames.

Color Code Description
LAA Grey1 Grey
LBB Brown1 Brown
LCC Green1 Green

Info ESB Channel Get (0x35)

The two lenses communicate using Enhanced ShockBurst (ESB). This lists the ESB channel they are talking on.

Command
35

Response

Header Success / Fail Channel ID
35 C9 / CA 57

Info ESB Channel Notification Count Get (0x36)

The two lenses communicate using Enhanced ShockBurst (ESB). Fetches the number of pending ESB notifications.

Command
36

Response

Header Success / Fail Notification Count
36 C9 / CA 02

Info Time Since Boot Get (0x37)

Fetches the time since boot in seconds.

Command
37

Response

Header Payload ??
37 49 1a 00 00 00 / 01

Info Buried Point Get (0x3E)

Fetch buried point data, which is essentially user usage tracking: https://www.php.cn/faq/446290.html

Command
3E

Response

Header Success JSON Payload
3E C9 Example censored as it may contain private data.

Language Set (0x3D)

Set the language for the glasses.

Command Size Pad Sequence Magic Language ID
3D 06 00 XX 01 XX

Language ID

ID Language
01 Chinese
02 English
03 Japanese
04 ??
05 French ?
06 German
07 Spanish ?
0E Italian

Response

TODO

Silent Mode Set (0x03)

This will activate or deactivate the silent mode of the glasses. Send to Both sides. Response is generic.

Command Enable/Disable Description
03 0C Silent Mode On
03 0A Silent Mode Off

Silent Mode Get (0x2B)

Fetches the current state of the silent mode setting. Additionally contains the State of the glasses. Send to Both sides.

Command
2B

Response

Header ?? Silent Enabled State Code
2B 69 0C (true) / 0A (false) XX

State Code

These codes are the same sent with the F5 device events.

Code State
06 Glasses worn
07 Glass not worn
08 Glass in case, lid open
0A Glasses in case, lid closed
0B Glasses in case, lid closed, case plugged in

Microphone Set (0x0E)

Turn the microphone on or off. Send to Left side. Response is generic

Header Enable / Disable
0E 00 / 01

MTU Set (0x4D)

Sets the Device BLE MTU value. This should match the setting requested from the host OS ble stack, but never exceed 251. Send to Both sides. Response is generic.

Command MTU value
4D FB (251)

Navigation Control (0x0A)

TODO

Subcommand

Subcommand ID Description
00 Init
01 Update Trip Status
02 Update Map Overview
03 Set Panoramic Map
04 App Sync Packet
05 Exit
06 Arrived

Notification App List Set (0x04)

Send over the config for notifications. This has JSON with some booleans and an allowlist for which apps to display notifications for. The easiest way to use this on android is to set a single app as allowed and just put all notifications under that particular app id. Send to Left side. Response is generic.

Command Chunk Count Chunk Payload (JSON) (Max size 180 bytes)
04 01 ~ FF 00 ~ FF {"calendar_enable":true, "Call_enable":true, "Msg_enable":true, "Ios_mail_enable":true, "app":{ "List":[ {"id":"com.app", "name":"App Name"}, ...], “enable”:true }

Notification App List Get (0x2E)

TODO

Notification Apple Specific Get (0x38)

Get the ANCS settings.

TODO

Notification Auto Display Set (0x4F)

Enables or disables the notification auto displaying on the glasses and the amount of time that the notification will be shown. Send to Both sides. Response is generic.

Command Enable/Disable Display Timeout (seconds)
4F 00 ~ 01 00 ~ FF

Notification Auto Display Get (0x3C)

Fetches the current value, in seconds, for how long a notification will be shown to the user when it arrives.. Send to Left side.

Command
3C

Response

Header Success Enabled Timeout
3C C9 00 / 01 00 ~ FF

Notification Send (0x4B)

Send a notification to the glasses. Divide the JSON payload into 180 byte segments and determine the number of chunks. Send multiple packets one for each chunk. The chunk count should be the same in all packets. The Chunk Index of each packet should increment by 1 as they are sent. Wait for a C9 (success) response before sending the next chunk. The msg_id in the JSON should be unique for each notification sent. Send to Left side. Response is generic.

Command Pad Chunk Count Chunk Index Payload (JSON) (Max size 180 bytes)
4B 00 01 ~ FF 00 ~ FF {"ncs_notification":{"msg_id":16,"action":0,"app_identifier":"nodomain.freeyourgadget.gadgetb","title":"Test notification","subtitle":"","message":"This is a test notification from Gadgetbridge","time_s":1749606217,"date":"2025-06-10 18:43:37","display_name":"Gadgetbridge"}}

Notification Clear (0x4C)

Clear a notification on the glasses. The msg_id should match one that was sent via the 0x4B command. Send to Left side. Response is generic.

Command Payload (32-bit msg id)
4C 00 00 00 1b

Status Get (0x22)

TODO

Status Running App Get (0x39)

TODO

System Control (0x23)

Debug Logging Set (0x23 0x6C)

Enables debug logging on the glasses. Response is generic. Oddly enough, 00 is enabled while C1 is disabled. See: Debug (0xF4).

Command Subcommand Enable/Disable
23 6C 00 / C1

Reboot (0x23 0x72)

Reboots the glasses. No response.

Command Subcommand
23 72

Firmware Build Info Get (0x23 0x74)

Send and the device should respond with fw build information

Command Subcommand
23 74

Response

This response kind of sucks because it has no header and is just raw ASCII data. Currently it always starts with “net”.

ASCII Payload
net build time: 2024-12-28 20:21:57, app build time 2024-12-28 20:20:45, ver 1.4.5, JBD DeviceID 4010

Teleprompter Control (0x09)

TODO

Subcommand

Subcommand ID Description
01 Init / Set Text
02 Set Position
03 Update Text
04 None
05 Exit

Teleprompter Suspend (0x24)

TODO

Teleprompter Position Set(0x25)

TODO

Text Set (0x4E)

Display full screen text. The official app uses this to show the response for the AI voice prompt. This can also be used to show just the text without the AI context. Send to Both sides.

Command Size Sequence Chunk Count Pad Chunk Pad Display Style Canvas State Position Page Page Count Payload (UTF-8)
4E XX 00 ~ FF 01 ~ FF 00 01 ~ FF 00 X X XX XX XX XX XX XX ...

Display Style

The display style is only 4bits, not a full byte.

Display Style ID Description
0 ??
1 ??
2 ??
3 Even AI displaying / Auto Scroll
4 Even AI Complete
5 Even AI displaying / Manual Scroll
6 Even AI Network Error
7 Show Text only

Canvas State

The Canvas State is only 4bits, not a full byte.

Canvas State Description
0 Draw to existing Canvas
1 Start New Canvas

Timer Control (0x07)

Is this a stop watch or timer?!?! TODO

Transcribe Control (0x0D)

TODO

Translate Control (0x0F)

TODO

Tutorial Control (0x1F)

TODO This has subcommands that need to be sent in sequence.

Unpair (0x47)

Removes the current Host (phone or PC) mac address from the glasses as a paired device. You should probably just unpair from the host device instead. Do NOT send this command unless you REALLY know what you are doing. Send to Both sides. Response is generic.

Command
47

Upgrade Control (0x17)

Before a fw update, and after a successful Firmware Update, resources will be allocated to the DFU firmware image. This command erases the image. Do NOT send this command unless you REALLY know what you are doing. Send to Both sides. Response is generic.

Command
17

Wear Detection Set (0x27)

Enable or disable Wear Detection. When enabled, additional 0xF5 messages are sent when worn or not. Response is generic.

Command Enable/Disable
27 00 ~ 01

Wear Detection Get (0x3A)

Fetches the current configured option for wear detection. This enables or disables a proximity sensor on the glasses that can determine if the glasses are worn or not. Send to Either side.

Command
3A

Response

Header Success Silent Enabled
3A C9 00 / 01

?? (0x50)

TODO. Send to Both sides.

Command Size ?? ?? ?? ??
50 06 00 00 01 01

Response

The full command is repeated back.

Command Size ?? ?? ?? ??
50 06 00 00 01 01

Scratch

Pane Map Set (0x07)

Command Length Pad Sequence
06 XX 00 00 ~ FF
Subcommand Chunk Count Pad Chunk Pad
07 01 ~ FF 00 01 ~ FF 00

[hand out map] | 7:54:14 372ms | requestStaticImage cost 862ms bytes:180604 [BLE] | 7:54:14 456ms | BleManager receive cmd: R22, len: 10, rssi: -66, data = 22 0a 00 00 01 00 01 00 04 00 [dashboard] | 7:54:14 456ms | _observeGlassInfo data = 22 0a 00 00 01 00 01 00 04 00 [dashboard] | 7:54:14 456ms | _observeGlassInfo unread:0 lowPower:true combine:DashboardCombineMode.full widget:DashboardMainWidgetMode.handOutMap index:0 [hand out map] | 7:54:14 652ms | handleImageDataAsync cost 280ms [debug] | 7:54:15 142ms | offsetWithPosition vertical:183 horizontal:400 size:800.0 366.0 x:0.5 y:0.5 [BLE] | 7:54:15 145ms | BleManager send cmd: L06, len: 12, data = 06 0c 00 57 07 01 00 01 00 00 04 00

[proto] | 7:54:15 265ms | configCityWalkLoading result:true cost 130ms [debug] | 7:54:15 531ms | offsetWithPosition vertical:183 horizontal:400 size:800.0 366.0 x:0.5 y:0.5 [BLE] | 7:54:15 526ms | BleManager send cmd: L06, len: 189, data = 06 bd 00 58 07 1c 00 01 00 00 04 02 01 00 00 00 00 00 00 00 00 40 00 00 00 00 00 00 00 00 00 70 00 00 00 00 00 04 00 00 00 00 00 00 00 0f 00 00 00 00 00 00 00 00 00 00 00 00 40 00 00 00 00 00 00 00 00 00 60 00 00 00 00 00 04 00 00 00 00 00 00 80 07 00 00 00 00 00 00 00 00 00 00 00 00 40 00 00 00 00 00 00 00 00 00 c0 00 00 00 00 00 04 00 00 00 00 00 00 c0 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 01 00 00 00 00 7c 00 00 00 00 00 00 e0 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 03 00 00 00 00 f0 00 00 00 [BLE] | 7:54:15 598ms | BleManager send cmd: L06, len: 189, data = 06 bd 00 59 07 1c 00 02 00 00 00 00 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 00 00 80 01 00 00 00 00 00 78 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 06 00 00 00 00 00 03 00 00 00 00 00 3c 00 00 00 00 80 00 00 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 1c 00 00 00 00 f0 00 00 00 00 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 18 00 00 00 00 00 03 00 00 00 00 00 0e 00 00 00 00 3f 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00 00 00 00 30 00 00 00 [BLE] | 7:54:15 620ms | BleManager send cmd: L06, len: 189, data = 06 bd 00 5a 07 1c 00 03 00 00 00 03 00 00 00 00 00 07 00 00 00 e0 07 00 00 00 00 00 00 00 00 08 00 00 00 00 00 00 00 00 00 00 30 00 00 00 00 00 03 00 00 00 00 80 03 00 00 00 fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60 00 00 00 00 00 03 00 00 00 00 c0 03 00 00 00 0f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0 00 00 00 00 00 01 00 00 00 00 e0 01 00 00 c0 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 01 00 00 00 00 01 00 00 00 00 e0 00 00 00 e0 00 00 00 00 00 00 00 1c 00 00 00 00 00 00 00 00 00 00 00 00 [BLE] | 7:54:15 661ms | BleManager send cmd: L06, len: 189, data = 06 bd 00 5b 07 1c 00 04 00 00 80 03 00 00 00 80 01 00 00 00 00 70 00 00 00 38 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 00 80 01 00 00 00 00 38 00 00 00 1c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00 00 00 80 00 00 00 00 00 38 00 00 00 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0c 00 00 00 80 00 00 00 00 00 1c 00 00 80 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 18 00 00 00 c0 00 00 00 00 00 1c 00 00 c0 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [BLE] | 7:54:15 661ms | BleManager send cmd: L06, len: 189, data = 06 bd 00 5c 07 1c 00 05 00 00 00 00 00 00 00 00 38 00 00 00 c0 00 00 00 00 00 0e 00 00 60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30 00 00 00 c0 00 00 00 00 00 07 00 00 30 00 00 00 00 00 00 00 18 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60 00 00 00 60 00 00 00 00 00 07 00 00 18 00 00 00 00 f0 00 00 3e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0 00 00 00 60 00 00 00 00 80 03 00 00 18 00 00 00 00 fe 1f 80 37 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 01 00 00 30 00 00 00 00 80 03 00 00 0c 00 00 00 c0 07 fc fd 21 00 00 00 [BLE] | 7:54:15 688ms | BleManager send cmd: L06, len: 189, data = 06 bd 00 5d 07 1c 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 30 00 00 00 00 c0 01 00 00 06 00 00 00 f0 18 c0 bf 61 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 07 00 00 18 00 00 00 00 e0 00 00 00 07 00 00 00 18 30 00 80 31 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00 00 0c 00 00 00 00 e0 00 00 00 03 00 00 00 0e c0 01 80 1b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0c 00 00 06 00 00 00 00 70 00 00 80 01 00 00 00 07 00 07 00 0f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 18 00 80 03 00 00 00 00 70 00 00 c0 00 00 00 00 01 00 38 [BLE] | 7:54:15 741ms | BleManager send cmd: L06, len: 189, data = 06 bd 00 5e 07 1c 00 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70 00 e0 01 00 00 00 00 38 00 00 c0 00 00 00 00 00 00 c0 0f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 04 00 00 e0 01 78 00 00 00 00 00 18 00 00 60 00 00 00 00 00 00 00 18 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0c 00 00 80 ff 1f 00 00 00 00 00 1c 00 00 30 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10 00 00 00 fc 03 00 00 00 00 00 0e 00 00 38 00 00 00 00 00 00 00 20 00 00 00 00 00 00 40 00 00 00 10 00 00 00 30 00 00 00 60 0f 00 00 00 00 00 0e 00 00 18 00 00 [BLE] | 7:54:15 751ms | BleManager send cmd: L06, len: 189, data = 06 bd 00 5f 07 1c 00 08 00 00 00 00 00 00 20 00 00 00 00 00 00 80 00 00 00 20 00 00 00 60 00 00 00 60 03 00 00 00 00 00 07 00 00 0c 00 00 00 00 00 00 00 20 00 00 00 00 00 00 00 01 00 00 20 00 00 00 40 00 00 00 60 03 00 00 00 00 80 03 00 00 06 00 00 00 00 00 00 00 20 00 00 00 00 00 00 00 02 00 00 40 00 00 00 80 00 00 00 60 03 00 00 00 00 80 03 00 00 06 00 00 00 00 00 00 00 40 00 00 00 00 00 00 00 08 00 00 80 00 00 00 80 01 00 00 60 03 00 00 00 00 c0 01 00 00 03 00 00 00 00 00 00 00 40 00 00 00 00 00 00 00 30 00 00 00 00 00 00 40 02 00 00 60 03 00 00 00 00 c0 01 [BLE] | 7:54:15 956ms | BleManager send cmd: L06, len: 189, data = 06 bd 00 60 07 1c 00 09 00 00 80 01 00 00 00 00 00 00 00 40 00 00 00 00 00 00 00 80 01 00 50 00 00 00 20 06 00 00 60 02 00 00 00 00 e0 00 00 80 01 00 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 1c 00 08 00 00 00 10 0c 00 00 60 02 00 00 00 00 70 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0 ff 0f 00 00 00 08 08 00 00 60 02 00 00 00 00 70 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 10 00 00 60 02 00 00 00 00 38 00 00 60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 20 00 00 60 02 00 [BLE] | 7:54:15 966ms | BleManager send cmd: L06, len: 189, data = 06 bd 00 61 07 1c 00 0a 00 00 00 00 38 00 00 60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 40 00 00 60 02 00 00 00 00 1c 00 00 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0 00 c0 01 00 60 02 00 00 00 00 0e 00 00 30 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60 00 80 03 00 60 02 00 00 00 00 0e 00 00 18 00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30 00 00 0e 00 60 02 00 00 00 00 07 00 00 08 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 18 00 00 [BLE] | 7:54:15 966ms | BleManager send cmd: L06, len: 189, data = 06 bd 00 62 07 1c 00 0b 00 1c 00 60 02 00 00 00 00 07 00 00 0c 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0c 00 00 70 00 60 02 00 00 00 80 03 00 00 04 00 00 00 80 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 00 c0 03 60 02 00 00 00 80 01 00 00 06 00 00 00 80 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 00 1f 60 02 00 00 00 c0 01 00 00 03 00 00 00 80 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 00 fc 63 02 00 00 00 c0 01 00 00 03 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [BLE] | 7:54:16 173ms | BleManager send cmd: L06, len: 189, data = 06 bd 00 63 07 1c 00 0c 00 00 00 06 00 00 00 80 ff ff 07 00 00 e0 00 00 80 01 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0c 00 00 00 00 f0 ff ff 00 00 70 00 00 80 01 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 18 00 00 00 00 00 00 e0 0f 00 70 00 00 80 01 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30 00 00 00 00 00 00 00 3c 00 38 00 00 80 01 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20 00 00 00 00 00 00 00 f0 00 38 00 00 80 01 00 00 00 40 00 01 00 00 00 00 00 00 00 00 00 [BLE] | 7:54:16 173ms | BleManager send cmd: L06, len: 189, data = 06 bd 00 64 07 1c 00 0d 00 00 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 c0 03 1c 00 00 80 01 00 00 00 60 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00 00 00 00 00 00 00 00 1f 1c 00 00 80 00 00 00 00 60 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 7c 0e 00 00 80 00 00 00 00 60 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 e0 0f 00 00 80 00 00 00 00 60 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 80 07 00 00 80 00 00 00 00 30 00 00 00 00 00 00 [BLE] | 7:54:16 354ms | BleManager send cmd: L06, len: 189, data = 06 bd 00 65 07 1c 00 0e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 08 04 00 00 00 00 00 00 00 3f 00 00 80 00 00 00 00 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10 3e 00 00 00 00 00 00 80 f3 00 00 ff ff ff 0f 00 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30 41 00 00 00 00 00 00 80 c3 ff ff ff ff ff ff 0f 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0 80 00 00 00 00 00 00 80 01 fe 1f 00 00 00 80 ff 1f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40 00 3f 00 00 00 00 00 c0 01 00 00 00 00 00 00 80 ff 03 [BLE] | 7:54:16 414ms | BleManager send cmd: L06, len: 189, data = 06 bd 00 66 07 1c 00 0f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00 00 ff ff 3f 00 00 c0 01 00 00 00 00 00 00 00 80 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 00 f0 03 00 e0 00 00 00 00 00 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 00 00 02 00 e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 00 00 00 02 00 60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0e 00 00 00 00 02 00 70 00 00 00 00 00 [BLE] | 7:54:16 445ms | BleManager send cmd: L06, len: 189, data = 06 bd 00 67 07 1c 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 38 00 00 00 00 02 00 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0 00 00 00 00 02 00 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 00 02 00 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0c 00 00 00 02 00 38 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30 00 00 00 02 00 38 [BLE] | 7:54:16 472ms | BleManager send cmd: L06, len: 189, data = 06 bd 00 68 07 1c 00 11 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0 00 00 00 02 00 38 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 02 00 18 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0c 00 00 02 00 18 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10 00 00 02 00 1c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60 [BLE] | 7:54:16 489ms | BleManager send cmd: L06, len: 189, data = 06 bd 00 69 07 1c 00 12 00 00 00 02 00 1c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0 00 00 02 00 1c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 01 00 02 00 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 00 02 00 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 04 00 02 00 0e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [BLE] | 7:54:16 517ms | BleManager send cmd: L06, len: 189, data = 06 bd 00 6a 07 1c 00 13 00 00 00 00 00 00 08 00 02 00 1f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10 00 02 00 1f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20 00 02 80 1b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60 00 02 80 1b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40 00 02 80 1b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [BLE] | 7:54:16 545ms | BleManager send cmd: L06, len: 189, data = 06 bd 00 6b 07 1c 00 14 00 00 00 00 00 00 00 00 00 00 00 80 00 02 80 1b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 01 02 80 1b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 02 80 1b 00 00 00 00 00 00 00 00 00 00 00 00 00 ff 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 02 80 1b 00 00 00 00 00 00 00 00 00 00 00 00 00 01 fc 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 02 80 1b 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 7e 00 [BLE] | 7:54:16 568ms | BleManager send cmd: L06, len: 189, data = 06 bd 00 6c 07 1c 00 15 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 04 02 80 1b 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 80 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 08 02 80 1b 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 1c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 08 02 80 1b 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10 02 80 1b 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 80 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30 02 80 1b 00 00 00 00 00 00 00 00 00 00 00 00 [BLE] | 7:54:16 605ms | BleManager send cmd: L06, len: 189, data = 06 bd 00 6d 07 1c 00 16 00 00 3f 00 00 00 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20 02 80 1b 00 00 00 00 00 00 00 00 00 00 00 00 00 e1 1f 00 00 18 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40 02 00 1b 00 00 00 00 00 00 00 00 00 00 00 00 00 01 e0 01 00 60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40 02 00 1b 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 3e 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 02 00 1b 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 e0 03 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 03 00 1b 00 00 00 00 00 00 00 [BLE] | 7:54:16 624ms | BleManager send cmd: L06, len: 189, data = 06 bd 00 6e 07 1c 00 17 00 00 00 00 00 00 00 01 00 00 1e 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 00 1b 00 00 00 00 00 00 00 00 00 00 00 00 fe 7f 00 00 30 00 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0e 00 1b 00 00 00 00 00 00 00 00 00 00 00 fc ff ff 7f 00 c0 00 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f8 ff 1b 00 00 00 00 00 00 00 00 00 00 c0 1f 80 00 f8 0f 00 03 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1b 00 00 00 00 00 00 00 00 00 00 f8 01 80 00 00 7e 00 06 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1b 00 00 [BLE] | 7:54:16 662ms | BleManager send cmd: L06, len: 189, data = 06 bd 00 6f 07 1c 00 18 00 00 00 00 00 00 00 00 00 3e 00 80 01 00 e0 03 08 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1b 00 00 00 00 00 00 00 00 00 00 0f 00 40 02 00 00 0f 30 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1b 00 00 00 00 00 00 00 00 00 00 11 00 20 fe 00 00 3c 40 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1b 00 00 00 00 00 00 00 00 00 00 20 00 10 f0 ff 1f 70 c0 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1b 00 00 00 00 00 00 00 00 00 00 40 00 08 18 60 e0 c0 80 21 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [BLE] | 7:54:16 693ms | BleManager send cmd: L06, len: 189, data = 06 bd 00 70 07 1c 00 19 00 00 00 1b 00 00 00 00 00 00 00 00 00 00 80 00 04 0c 30 c0 81 01 31 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1b 00 00 00 00 00 00 00 00 00 00 00 01 02 06 18 20 03 07 1a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1b 00 00 00 00 00 00 00 00 00 00 00 03 03 0b 0c 10 06 06 0e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1b 00 00 00 00 00 00 00 00 00 00 00 06 86 11 06 18 0c 0c 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fb ff 07 00 00 00 00 00 00 00 00 00 0c cc 32 03 04 18 0c 03 00 00 00 00 00 00 00 00 00 00 [BLE] | 7:54:16 737ms | BleManager send cmd: L06, len: 189, data = 06 bd 00 71 07 1c 00 1a 00 00 00 00 00 00 00 00 fb ff ff 00 00 00 00 00 00 00 00 00 18 78 cc 01 02 18 d8 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1b 00 c0 07 00 00 00 00 00 00 00 00 30 b0 cc 00 01 64 78 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1b 00 00 1e 00 00 00 00 00 00 00 00 60 0c 73 80 00 42 38 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0 00 00 1b 00 00 38 00 00 00 00 00 00 00 00 40 0c 23 40 00 81 3c 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f 00 1b 00 00 70 00 00 00 00 00 00 00 00 80 98 14 20 80 00 a3 00 00 00 00 00 00 [BLE] | 7:54:16 761ms | BleManager send cmd: L06, len: 189, data = 06 bd 00 72 07 1c 00 1b 00 00 00 00 00 00 00 00 00 00 00 00 7f 1b 00 00 c0 00 00 00 00 00 00 00 00 00 a1 08 10 40 80 61 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 1b 00 00 80 01 00 00 00 00 00 00 00 00 d2 04 08 20 c0 62 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1b 00 00 00 03 00 00 00 00 00 00 00 00 a4 0d 06 10 60 d2 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1b 00 00 00 03 00 00 00 00 00 00 00 00 48 15 02 08 30 ce 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1b 00 00 00 06 00 00 00 00 00 00 00 00 50 a0 01 04 08 84 01 [BLE] | 7:54:16 786ms | BleManager send cmd: L06, len: 185, data = 06 b9 00 73 07 1c 00 1c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1b 00 00 00 0c 00 00 00 00 00 00 00 00 30 c1 00 02 0c 8c 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1b 00 00 00 0c 00 00 00 00 00 00 00 00 60 80 00 01 06 89 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1b 00 00 00 18 00 00 00 00 00 00 00 00 80 00 c1 00 41 0c 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 3b 00 00 00 18 00 00 00 00 00 00 00 00 00 01 66 80 60 12 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 3b 00 00 00 10 00 00 00 00 00 00 [proto] | 7:54:16 919ms | configCityWalkMapData result:true cost 1399ms

Send Arrow Data

[hand out map] | 7:54:16 919ms | _sendMapData result:true [debug] | 7:54:16 919ms | offsetWithPosition vertical:183 horizontal:400 size:800.0 366.0 x:0.5 y:0.5 [hand out map] | 7:54:16 919ms | _calculateArrowPosition x:132 y:52 [hand out map] | 7:54:16 921ms | prepareArrowData image 32 32 3072 128 [hand out map] | 7:54:16 921ms | _sendArrowData bytes:128 heading:55 x:132 y:52 [BLE] | 7:54:16 931ms | BleManager send cmd: L06, len: 144, data = 06 90 00 74 07 01 00 01 00 00 04 03 84 00 34 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20 00 00 00 f0 03 00 00 fc 3f 00 00 fe 7f 00 00 fc 3f 00 00 00 3f 00 00 00 3c 00 00 00 3e 00 00 00 3e 00 00 00 1e 00 00 00 3e 00 00 00 1e 00 00 00 0e 00 00 00 06 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [proto] | 7:54:17 23ms | configCityWalkArrowData result:true cost 101ms

[debug] | 7:54:48 40ms | offsetWithPosition vertical:183 horizontal:400 size:800.0 366.0 x:0.5 y:0.5 [hand out map] | 7:54:48 40ms | _calculateArrowPosition x:132 y:52 [hand out map] | 7:54:48 41ms | prepareArrowData image 32 32 3072 128 [hand out map] | 7:54:48 41ms | _sendArrowData bytes:128 heading:90 x:132 y:52 [BLE] | 7:54:48 46ms | BleManager send cmd: L06, len: 144, data = 06 90 00 7d 07 01 00 01 00 00 04 03 84 00 34 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f8 01 00 00 f0 03 00 00 e0 07 00 00 c0 0f 00 00 80 1f 00 00 00 3f 00 00 00 7e 00 00 00 7e 00 00 00 3f 00 00 80 1f 00 00 c0 0f 00 00 e0 07 00 00 f0 03 00 00 f8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [debug] | 7:54:48 48ms | offsetWithPosition vertical:183 horizontal:400 size:800.0 366.0 x:0.5 y:0.5 [proto] | 7:54:48 162ms | configCityWalkArrowData result:true cost 121ms

07 01 00 01 00 00 04 03 84 00 34 00

0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000011111000 0000000100000000 0000000011110000 0000001100000000 0000000011100000 0000011100000000 0000000011000000 0000111100000000 0000000010000000 0001111100000000 0000000000000000 0011111100000000 0000000000000000 0111111000000000 0000000000000000 0111111000000000 0000000000000000 0011111100000000 0000000010000000 0001111100000000 0000000011000000 0000111100000000 0000000011100000 0000011100000000 0000000011110000 0000001100000000 0000000011111000 0000000100000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000

Pad ?? Layer? X Offset Y Offset
00 04 00 ~ 04 84 00 34 00

[BLE] | 7:55:05 118ms | BleManager send cmd: R06, len: 144, data = 06 90 00 86 07 01 00 01 00 00 04 03 84 00 34 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [BLE] | 7:55:05 158ms | BleManager receive cmd: R06, len: 10, rssi: -58, data = 06 90 00 86 07 01 00 01 00 00 [proto] | 7:55:05 158ms | configCityWalkArrowData result:true cost 103ms

06 90 00 86 07 01 00 01 00 00 04 03 84 00 34 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0 00 00 00 e0 00 00 00 f0 00 00 00 78 00 00 00 f0 00 00 00 f0 00 00 00 78 00 00 00 f0 00 00 00 f0 00 01 00 f8 ff 01 00 f8 ff 00 00 f0 7f 00 00 f0 3f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Set the dashboard mode, currently has three modes: minimal, dual, full

Subcommand Chunk Count Pad Chunk Payload
07 01 ~ FF 00 00 07 01 00 01 00 00 04 03 07 1c 00 01 00 00 04 02 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000011111000 0000000100000000 0000000011110000 0000001100000000 0000000011100000 0000011100000000 0000000011000000 0000111100000000 0000000010000000 0001111100000000 0000000000000000 0011111100000000 0000000000000000 0111111000000000 0000000000000000 0111111000000000 0000000000000000 0011111100000000 0000000010000000 0001111100000000 0000000011000000 0000111100000000 0000000011100000 0000011100000000 0000000011110000 0000001100000000 0000000011111000 0000000100000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000

Head Up Calibration Control (0x10)

Set or clear the base horizontal head up angle. Response is generic TODO ??

Reset 0degree position 2025-05-18 18:45:07.339 10946-10996 ble_L com.even.g1 E sent status 10 L 0 , sent size: 5 sent: 10 05 00 04 01 2025-05-18 18:45:07.343 10946-10996 ble_R com.even.g1 E sent status 10 R 0 , sent size: 5 sent: 10 05 00 04 01 2025-05-18 18:45:07.375 10946-12531 ble_L com.even.g1 E received L len: 20,--10 06 00 04 01 c9 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Calibration 2025-05-18 18:47:39.362 10946-10993 ble_L com.even.g1 E sent status 39 L 0 , sent size: 5 sent: 39 05 00 5f 01 2025-05-18 18:47:39.447 10946-12531 ble_L com.even.g1 E received L len: 6,--39 05 00 5f 01 00 2025-05-18 18:47:39.447 10946-12531 ble_L com.even.g1 W callback type: Receive, data: [B@70545f6 2025-05-18 18:47:39.448 12038-12732 nodomain.f....BtLEQueue nod...n.freeyourgadget.gadgetbridge D characteristic changed: 6e400003-b5a3-f393-e0a9-e50e24dcca9e value: 0x39 0x05 0x00 0x5f 0x01 0x00 2025-05-18 18:47:39.449 12038-12732 nodomain.f...ideManager nod...n.freeyourgadget.gadgetbridge D Unhandled payload on side 0: 0x39 0x05 0x00 0x5f 0x01 0x00 2025-05-18 18:47:39.456 10946-10993 ble_R com.even.g1 E sent status 39 R 0 , sent size: 5 sent: 39 05 00 5f 01 2025-05-18 18:47:39.501 10946-12530 ble_R com.even.g1 E received R len: 6,--39 05 00 5f 01 00 2025-05-18 18:47:39.501 10946-12530 ble_R com.even.g1 W callback type: Receive, data: [B@ad3edf7 2025-05-18 18:47:39.503 12038-12732 nodomain.f....BtLEQueue nod...n.freeyourgadget.gadgetbridge D characteristic changed: 6e400003-b5a3-f393-e0a9-e50e24dcca9e value: 0x39 0x05 0x00 0x5f 0x01 0x00 2025-05-18 18:47:39.506 12038-12732 nodomain.f...ideManager nod...n.freeyourgadget.gadgetbridge D Unhandled payload on side 1: 0x39 0x05 0x00 0x5f 0x01 0x00 2025-05-18 18:47:39.512 10946-10993 ble_R com.even.g1 E sent status 50 R 0 , sent size: 6 sent: 50 06 00 00 01 01 2025-05-18 18:47:39.801 10946-12530 ble_R com.even.g1 E received R len: 6,--50 06 00 00 01 01 2025-05-18 18:47:39.801 10946-12530 ble_R com.even.g1 W callback type: Receive, data: [B@2c7c464 2025-05-18 18:47:39.803 12038-12732 nodomain.f....BtLEQueue nod...n.freeyourgadget.gadgetbridge D characteristic changed: 6e400003-b5a3-f393-e0a9-e50e24dcca9e value: 0x50 0x06 0x00 0x00 0x01 0x01 2025-05-18 18:47:39.807 12038-12732 nodomain.f...ideManager nod...n.freeyourgadget.gadgetbridge D Unhandled payload on side 1: 0x50 0x06 0x00 0x00 0x01 0x01 2025-05-18 18:47:39.814 10946-10993 ble_L com.even.g1 E sent status 10 L 0 , sent size: 7 sent: 10 07 00 0c 02 01 00 2025-05-18 18:47:39.822 10946-10993 ble_R com.even.g1 E sent status 10 R 0 , sent size: 7 sent: 10 07 00 0c 02 01 00 2025-05-18 18:47:39.850 10946-12531 ble_L com.even.g1 E received L len: 20,--10 06 00 0c 02 c9 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2025-05-18 18:47:39.850 10946-12531 ble_L com.even.g1 W callback type: Receive, data: [B@63d46cd 2025-05-18 18:47:39.856 12038-12732 nodomain.f....BtLEQueue nod...n.freeyourgadget.gadgetbridge D characteristic changed: 6e400003-b5a3-f393-e0a9-e50e24dcca9e value: 0x10 0x06 0x00 0x0c 0x02 0xc9 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 2025-05-18 18:47:39.862 12038-12732 nodomain.f...ideManager nod...n.freeyourgadget.gadgetbridge D Unhandled payload on side 0: 0x10 0x06 0x00 0x0c 0x02 0xc9 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 2025-05-18 18:47:39.889 10946-12530 ble_R com.even.g1 E received R len: 20,--10 06 00 0c 02 c9 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Ack on glasses 2025-05-18 18:48:41.449 10946-12530 ble_R com.even.g1 E received R len: 20,--10 06 00 0d 02 c9 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Done in app E sent status 10 L 0 , sent size: 7 sent: 10 07 00 05 02 00 00 2025-05-18 18:53:19.222 13285-13467 ble_R com.even.g1 E sent status 10 R 0 , sent size: 7 sent: 10 07 00 05 02 00 00 2025-05-18 18:53:19.269 13285-13632 ble_R com.even.g1 E received R len: 20,--10 06 00 05 02 c9 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2025-05-18 18:53:19.269 13285-13632 ble_R com.even.g1 W callback type: Receive, data: [B@f8f1fff 2025-05-18 18:53:19.270 13285-13552 ble_R com.even.g1 E received R len: 20,--10 06 00 05 02 c9 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2025-05-18 18:53:19.270 13285-13732 ble_R com.even.g1 E received R len: 20,--10 06 00 05 02 c9 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2025-05-18 18:53:19.270 13285-13732 ble_R com.even.g1 W callback type: Receive, data: [B@c2d9c15 2025-05-18 18:53:19.270 13285-13552 ble_R com.even.g1 W callback type: Receive, data: [B@9ea81cc 2025-05-18 18:53:19.276 13285-13586 ble_L com.even.g1 E received L len: 20,--10 06 00 05 02 c9 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2025-05-18 18:53:19.276 13285-13733 ble_L com.even.g1 E received L len: 20,--10 06 00 05 02 c9 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2025-05-18 18:53:19.276 13285-13586 ble_L com.even.g1 W callback type: Receive, data: [B@2380b2a 2025-05-18 18:53:19.276 13285-13733 ble_L com.even.g1 W callback type: Receive, data: [B@1bfbd1b 2025-05-18 18:53:19.276 13285-13631 ble_L com.even.g1 E received L len: 20,--10 06 00 05 02 c9 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2025-05-18 18:53:19.276 13285-13631 ble_L com.even.g1 W callback type: Receive, data: [B@823eeb8 2025-05-18 18:53:19.338 13285-13737 ble_L com.even.g1 E Failed to write characteristic 201 2025-05-18 18:53:19.343 13285-13293 ble_L com.even.g1 E sent status 10 L 0 , sent size: 7 sent: 10 07 00 03 02 01 01 2025-05-18 18:53:19.349 13285-13293 ble_R com.even.g1 E sent status 10 R 0 , sent size: 7 sent: 10 07 00 03 02 01 01 2025-05-18 18:53:19.352 13285-13293 ble_L com.even.g1 E sent status 10 L 0 , sent size: 7 sent: 10 07 00 03 02 01 01 2025-05-18 18:53:19.525 13285-13738 ble_L com.even.g1 E Failed to write characteristic 201 2025-05-18 18:53:19.530 13285-13450 ble_L com.even.g1 E sent status 10 L 0 , sent size: 7 sent: 10 07 00 03 02 01 01 2025-05-18 18:53:19.535 13285-13450 ble_R com.even.g1 E sent status 10 R 0 , sent size: 7 sent: 10 07 00 03 02 01 01 2025-05-18 18:53:19.538 13285-13450 ble_L com.even.g1 E sent status 10 L 0 , sent size: 7 sent: 10 07 00 03 02 01 01 2025-05-18 18:53:19.806 13285-13586 ble_L com.even.g1 E received L len: 20,--10 06 00 02 02 c9 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2025-05-18 18:53:19.806 13285-13733 ble_L com.even.g1 E received L len: 20,--10 06 00 02 02 c9 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2025-05-18 18:53:19.806 13285-13586 ble_L com.even.g1 W callback type: Receive, data: [B@b930ff7 2025-05-18 18:53:19.806 13285-13631 ble_L com.even.g1 E received L len: 20,--10 06 00 02 02 c9 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2025-05-18 18:53:19.806 13285-13733 ble_L com.even.g1 W callback type: Receive, data: [B@c853e64 2025-05-18 18:53:19.806 13285-13631 ble_L com.even.g1 W callback type: Receive, data: [B@31638cd 2025-05-18 18:53:19.817 13285-13586 ble_L com.even.g1 E received L len: 20,--10 06 00 03 02 c9 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2025-05-18 18:53:19.817 13285-13631 ble_L com.even.g1 E received L len: 20,--10 06 00 03 02 c9 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2025-05-18 18:53:19.817 13285-13586 ble_L com.even.g1 W callback type: Receive, data: [B@152d582 2025-05-18 18:53:19.817 13285-13631 ble_L com.even.g1 W callback type: Receive, data: [B@1deb493 2025-05-18 18:53:19.818 13285-13733 ble_L com.even.g1 E received L len: 20,--10 06 00 03 02 c9 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2025-05-18 18:53:19.818 13285-13733 ble_L com.even.g1 W callback type: Receive, data: [B@389dcd0 2025-05-18 18:53:19.833 13285-13586 ble_L com.even.g1 E received L len: 20,--10 06 00 06 02 c9 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2025-05-18 18:53:19.833 13285-13586 ble_L com.even.g1 W callback type: Receive, data: [B@bda94c9 2025-05-18 18:53:19.833 13285-13631 ble_L com.even.g1 E received L len: 20,--10 06 00 06 02 c9 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2025-05-18 18:53:19.833 13285-13631 ble_L com.even.g1 W callback type: Receive, data: [B@1dcc7ce 2025-05-18 18:53:19.833 13285-13733 ble_L com.even.g1 E received L len: 20,--10 06 00 06 02 c9 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2025-05-18 18:53:19.833 13285-13733 ble_L com.even.g1 W callback type: Receive, data: [B@73606ef 2025-05-18 18:53:19.840 13285-13632 ble_R com.even.g1 E received R len: 20,--10 06 00 03 02 c9 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2025-05-18 18:53:19.841 13285-13732 ble_R com.even.g1 E received R len: 20,--10 06 00 03 02 c9 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2025-05-18 18:53:19.841 13285-13632 ble_R com.even.g1 W callback type: Receive, data: [B@3f7f5fc 2025-05-18 18:53:19.841 13285-13552 ble_R com.even.g1 E received R len: 20,--10 06 00 03 02 c9 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2025-05-18 18:53:19.841 13285-13552 ble_R com.even.g1 W callback type: Receive, data: [B@192da 2025-05-18 18:53:19.841 13285-13732 ble_R com.even.g1 W callback type: Receive, data: [B@a6eb485 2025-05-18 18:53:19.847 13285-13586 ble_L com.even.g1 E received L len: 20,--10 06 00 03 02 c9 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2025-05-18 18:53:19.847 13285-13586 ble_L com.even.g1 W callback type: Receive, data: [B@a06230b 2025-05-18 18:53:19.847 13285-13733 ble_L com.even.g1 E received L len: 20,--10 06 00 03 02 c9 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2025-05-18 18:53:19.847 13285-13733 ble_L com.even.g1 W callback type: Receive, data: [B@8cc75e8 2025-05-18 18:53:19.847 13285-13631 ble_L com.even.g1 E received L len: 20,--10 06 00 03 02 c9 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2025-05-18 18:53:19.847 13285-13631 ble_L com.even.g1 W callback type: Receive, data: [B@46b1401 2025-05-18 18:53:19.855 13285-13552 ble_R com.even.g1 E received R len: 20,--10 06 00 03 02 c9 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2025-05-18 18:53:19.855 13285-13732 ble_R com.even.g1 E received R len: 20,--10 06 00 03 02 c9 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2025-05-18 18:53:19.855 13285-13632 ble_R com.even.g1 E received R len: 20,--10 06 00 03 02 c9 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Status Running App Get (0x39)

2025-06-10 18:49:51.248 4328-5106 ble_L com.even.g1 E sent status 39 L 0 , sent size: 5 sent: 39 05 00 97 01 2025-06-10 18:49:51.254 29819-30489 nodomain.f....BtLEQueue nod...n.freeyourgadget.gadgetbridge D characteristic changed: 6e400003-b5a3-f393-e0a9-e50e24dcca9e value: 0x4f 0xc9 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 2025-06-10 18:49:51.291 29819-30489 nodomain.f....BtLEQueue nod...n.freeyourgadget.gadgetbridge D characteristic changed: 6e400003-b5a3-f393-e0a9-e50e24dcca9e value: 0x39 0x05 0x00 0x97 0x01 0x00 2025-06-10 18:49:51.292 4328-30265 ble_L com.even.g1 E received L len: 6,--39 05 00 97 01 00 2025-06-10 18:49:51.294 29819-30489 nodomain.f...ideManager nod...n.freeyourgadget.gadgetbridge D Unhandled payload on side 0: 0x39 0x05 0x00 0x97 0x01 0x00 2025-06-10 18:49:51.295 4328-4328 BleCmd com.even.g1 I methodHandler: send, cmd: 39 len: 5 2025-06-10 18:49:51.300 4328-5106 ble_R com.even.g1 E sent status 39 R 0 , sent size: 5 sent: 39 05 00 97 01 2025-06-10 18:49:51.344 4328-30264 ble_R com.even.g1 E received R len: 6,--39 05 00 97 01 00

Dashboard Quick Note Set (0x1E)

TODO sent status 1e L 0 , sent size: 16 sent: 1e 10 00 29 03 01 00 01 00 03 00 01 00 01 00 00 received L len: 10,--1e 10 00 29 03 01 00 01 00 00

Pane Stock Set (0x04)

TODO cmd: L06, len: 189, data = 06 bd 00 6d 04 0b 00 01 00 00 01 02 01 01 01 08 47 4d 45 2e 58

Command Length Pad Sequence
06 XX 00 00 ~ FF
Subcommand Chunk Count Pad Chunk Pad
04 01 ~ FF 00 01 ~ FF 00

Pane News Set (0x05)

TODO len: 115, data = 06 73 00 52 05 01 00 01 00 00 02 02 01 01 01 08 ASCII

Command Length Pad Sequence
06 XX 00 00 ~ FF
Subcommand Chunk Count Pad Chunk Pad
05 01 ~ FF 00 01 ~ FF 00

File Upload (0x15)

TODO Image transmission currently supports 1-bit, 576*136 pixel BMP images (refer to image_1.bmp, image_2.bmp in the project). The core process includes three steps:

  1. Divide the BMP image data into packets (each packet is 194 bytes), then add 0x15 command and syncID to the front of the packet, and send it to the dual BLE in the order of the packets (the left and right sides can be sent independently at the same time). The first packet needs to insert 4 bytes of glasses end storage address 0x00, 0x1c, 0x00, 0x00, so the first packet data is ([0x15, index & 0xff, 0x00, 0x1c, 0x00, 0x00], pack), and other packets do not need addresses 0x00, 0x1c, 0x00, 0x00;
  2. After sending the last packet, it is necessary to send the packet end command [0x20, 0x0d, 0x0e] to the dual BLE;
  3. After the packet end command in step 2 is correctly replied, send the CRC check command to the dual BLE through the 0x16 command. When calculating the CRC, it is necessary to consider the glasses end storage address added when sending the first BMP packet.

For a specific example, click the icon in the upper right corner of the App homepage to enter the Features page. The page contains three buttons: BMP 1, BMP 2, and Exit, which represent the transmission and display of picture 1, the transmission and display of picture 2, and the exit of picture transmission and display.

Command Information

  • Command: 0x15
  • seq (Sequence Number): 0~255
  • address: [0x00, 0x1c, 0x00, 0x00]
  • data0 ~ data194

Field Descriptions

  • seq (Sequence Number):
    • Range: 0~255
    • Description: Indicates the sequence of the current package.
  • address: bmp address in the Glasses (just attached in the first pack)
  • data0 ~ data194:
    • bmp data packet

File Upload Complete (0x20)

Also used to upgrade a font, it seems. TODO

Clone this wiki locally