Adding new device 70012 SuperLED Dimmer

[ikke-t]

Hi,

as a newbie to Z2M code. I'm long time user though, and exited to add a new device if given some guidance! .

Definition

I gives clear instructions how to create new external definition. Z2M gave me this:

const m = require('zigbee-herdsman-converters/lib/modernExtend');

const definition = {
    zigbeeModel: ['70012'],
    model: '70012',
    vendor: 'SuperLED',
    description: 'SÄVY NUPPI, Zigbee LED-dimmer, triac, 5-200W',
    extend: [m.light()],
    meta: {},
};

module.exports = definition;

I'll try adding it to zigbee-herdsman-converters/src/devices. There doens't seem to be any effect or poweron mode even though z2m lists the options for now. I suppose I's need to modify the extend to drop them. Would it be like this:

extend: [m.light({effect: false, powerOnBehavior: false})], 

Notes

Also it mentions I could add a note. I suppose I could drop instructions there how to reset and start pairing the device. But what should I use as a template? It just says not to use heading 1-2 for notes, but doesn't mention what to use as template. Will it be autogenerated after adding the pic?

Start pairing by pressing reset button twice. Blue led starts to blink and the device is in pairing mode for 15 mins. Once the pairing is done the blue led is constantly on.

To unpair the device press reset button 3 times. Violet led starts blinking. Once done, violet led is constantly on

Factory reset is done by pressing the reset button for 5 seconds. Red led will turn on for 10 secs for success.

I have the picture already ready to go here: https://github.com/Koenkk/zigbee2mqtt.io/compare/master...ikke-t:zigbee2mqtt.io:superled-s%C3%A4vy?expand=1#diff-b5a09109fda1bf7d98987e6f39cc131dd0a7f925d4eae2e9182404c30103fc20

I'd be happy to get this device into the list. I have three of them, and they work fine. I have a feeling the Home Assistant doesn't reflect the state of devices if not set by HA. So perhaps some definition missing from somewhere? Or is it that I would need to set reporting to true in extend?

Here are some of the logs around time of pairing:

Mar 21 19:17:40 vattupieras node[662]: [2025-03-21 19:17:40] info:         zh:controller: Succesfully interviewed '0x6c5cb1fffed6b5f0'
Mar 21 19:17:40 vattupieras node[662]: [2025-03-21 19:17:40] info:         z2m: Successfully interviewed '0x6c5cb1fffed6b5f0', device has successfully been paired
Mar 21 19:17:40 vattupieras node[662]: [2025-03-21 19:17:40] warning:         z2m: Device '0x6c5cb1fffed6b5f0' with Zigbee model '70012' and manufacturer name 'SuperLED' is NOT supported, please follow https://www.zigbee2mqtt.io/advanced/support-new-devices/01_support_new_devices.html
Mar 21 19:17:40 vattupieras node[662]: [2025-03-21 19:17:40] info:         z2m: Configuring '0x6c5cb1fffed6b5f0'
Mar 21 19:17:40 vattupieras node[662]: [2025-03-21 19:17:40] info:         z2m:mqtt: MQTT publish: topic 'homeassistant/light/0x6c5cb1fffed6b5f0/light/config', payload '{"availability":[{"topic":"zigbee2mqtt/bridge/state","value_template":"{{ value_json.state }}"}],"brightness":true,"brightness_scale":254,"command_topic":"zigbee2mqtt/0x6c5cb1fffed6b5f0/set","device":{"hw_version":0,"identifiers":["zigbee2mqtt_0x6c5cb1fffed6b5f0"],"manufacturer":"SuperLED","model":"Automatically generated definition","model_id":"70012","name":"0x6c5cb1fffed6b5f0","sw_version":"3.09","via_device":"zigbee2mqtt_bridge_0xe0798dfffea88aff"},"effect":true,"effect_list":["blink","breathe","okay","channel_change","finish_effect","stop_effect"],"name":null,"object_id":"0x6c5cb1fffed6b5f0","origin":{"name":"Zigbee2MQTT","sw":"2.0.0","url":"https://www.zigbee2mqtt.io"},"schema":"json","state_topic":"zigbee2mqtt/0x6c5cb1fffed6b5f0","unique_id":"0x6c5cb1fffed6b5f0_light_zigbee2mqtt"}'
Mar 21 19:17:40 vattupieras node[662]: [2025-03-21 19:17:40] info:         z2m: Successfully configured '0x6c5cb1fffed6b5f0'
Mar 21 19:17:40 vattupieras node[662]: [2025-03-21 19:17:40] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/event', payload '{"data":{"definition":{"description":"Automatically generated definition","exposes":[{"features":[{"access":7,"description":"On/off state of this light","label":"State","name":"state","property":"state","type":"binary","value_off":"OFF","value_on":"ON","value_toggle":"TOGGLE"},{"access":7,"description":"Brightness of this light","label":"Brightness","name":"brightness","property":"brightness","type":"numeric","value_max":254,"value_min":0}],"type":"light"},{"access":2,"description":"Triggers an effect on the light (e.g. make light blink for a few seconds)","label":"Effect","name":"effect","property":"effect","type":"enum","values":["blink","breathe","okay","channel_change","finish_effect","stop_effect"]},{"access":7,"category":"config","description":"Controls the behavior when the device is powered on after power loss","label":"Power-on behavior","name":"power_on_behavior","property":"power_on_behavior","type":"enum","values":["off","on","toggle","previous"]},{"access":1,"category":"diagnostic","description":"Link quality (signal strength)","label":"Linkquality","name":"linkquality","property":"linkquality","type":"numeric","unit":"lqi","value_max":255,"value_min":0}],"model":"70012","options":[{"access":2,"description":"Controls the transition time (in seconds) of on/off, brightness, color temperature (if applicable) and color (if applicable) changes. Defaults to `0` (no transition).","label":"Transition","name":"transition","property":"transition","type":"numeric","value_min":0},{"access":2,"description":"State actions will also be published as 'action' when true (default false).","label":"State action","name":"state_action","property":"state_action","type":"binary","value_off":false,"value_on":true}],"supports_ota":false,"vendor":"SuperLED"},"friendly_name":"0x6c5cb1fffed6b5f0","ieee_address":"0x6c5cb1fffed6b5f0","status":"successful","supported":false},"type":"device_interview"}'
Mar 21 19:17:40 vattupieras node[662]: [2025-03-21 19:17:40] info:         z2m:mqtt: MQTT publish: topic 'homeassistant/select/0x6c5cb1fffed6b5f0/effect/config', payload '{"availability":[{"topic":"zigbee2mqtt/bridge/state","value_template":"{{ value_json.state }}"}],"command_topic":"zigbee2mqtt/0x6c5cb1fffed6b5f0/set/effect","device":{"hw_version":0,"identifiers":["zigbee2mqtt_0x6c5cb1fffed6b5f0"],"manufacturer":"SuperLED","model":"Automatically generated definition","model_id":"70012","name":"0x6c5cb1fffed6b5f0","sw_version":"3.09","via_device":"zigbee2mqtt_bridge_0xe0798dfffea88aff"},"enabled_by_default":false,"icon":"mdi:palette","name":"Effect","object_id":"0x6c5cb1fffed6b5f0_effect","options":["blink","breathe","okay","channel_change","finish_effect","stop_effect"],"origin":{"name":"Zigbee2MQTT","sw":"2.0.0","url":"https://www.zigbee2mqtt.io"},"unique_id":"0x6c5cb1fffed6b5f0_effect_zigbee2mqtt"}'
Mar 21 19:17:40 vattupieras node[662]: [2025-03-21 19:17:40] info:         z2m:mqtt: MQTT publish: topic 'homeassistant/select/0x6c5cb1fffed6b5f0/power_on_behavior/config', payload '{"availability":[{"topic":"zigbee2mqtt/bridge/state","value_template":"{{ value_json.state }}"}],"command_topic":"zigbee2mqtt/0x6c5cb1fffed6b5f0/set/power_on_behavior","device":{"hw_version":0,"identifiers":["zigbee2mqtt_0x6c5cb1fffed6b5f0"],"manufacturer":"SuperLED","model":"Automatically generated definition","model_id":"70012","name":"0x6c5cb1fffed6b5f0","sw_version":"3.09","via_device":"zigbee2mqtt_bridge_0xe0798dfffea88aff"},"entity_category":"config","icon":"mdi:power-settings","name":"Power-on behavior","object_id":"0x6c5cb1fffed6b5f0_power_on_behavior","options":["off","on","toggle","previous"],"origin":{"name":"Zigbee2MQTT","sw":"2.0.0","url":"https://www.zigbee2mqtt.io"},"state_topic":"zigbee2mqtt/0x6c5cb1fffed6b5f0","unique_id":"0x6c5cb1fffed6b5f0_power_on_behavior_zigbee2mqtt","value_template":"{{ value_json.power_on_behavior }}"}'
Mar 21 19:17:40 vattupieras node[662]: [2025-03-21 19:17:40] info:         z2m:mqtt: MQTT publish: topic 'homeassistant/sensor/0x6c5cb1fffed6b5f0/linkquality/config', payload '{"availability":[{"topic":"zigbee2mqtt/bridge/state","value_template":"{{ value_json.state }}"}],"device":{"hw_version":0,"identifiers":["zigbee2mqtt_0x6c5cb1fffed6b5f0"],"manufacturer":"SuperLED","model":"Automatically generated definition","model_id":"70012","name":"0x6c5cb1fffed6b5f0","sw_version":"3.09","via_device":"zigbee2mqtt_bridge_0xe0798dfffea88aff"},"enabled_by_default":false,"entity_category":"diagnostic","icon":"mdi:signal","name":"Linkquality","object_id":"0x6c5cb1fffed6b5f0_linkquality","origin":{"name":"Zigbee2MQTT","sw":"2.0.0","url":"https://www.zigbee2mqtt.io"},"state_class":"measurement","state_topic":"zigbee2mqtt/0x6c5cb1fffed6b5f0","unique_id":"0x6c5cb1fffed6b5f0_linkquality_zigbee2mqtt","unit_of_measurement":"lqi","value_template":"{{ value_json.linkquality }}"}'
Mar 21 19:17:47 vattupieras node[662]: [2025-03-21 19:17:47] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x6c5cb1fffed6b5f0', payload '{"effect":null,"linkquality":192,"power_on_behavior":null,"state":"OFF"}'
Mar 21 19:17:49 vattupieras node[662]: [2025-03-21 19:17:49] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x6c5cb1fffed6b5f0', payload '{"effect":null,"linkquality":196,"power_on_behavior":null,"state":"ON"}'
Mar 21 19:17:51 vattupieras node[662]: [2025-03-21 19:17:51] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x6c5cb1fffed6b5f0', payload '{"brightness":254,"effect":null,"linkquality":196,"power_on_behavior":null,"state":"ON"}'
Mar 21 19:17:53 vattupieras node[662]: [2025-03-21 19:17:53] info:         z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0x6c5cb1fffed6b5f0', payload '{"brightness":191,"effect":null,"linkquality":192,"power_on_behavior":null,"state":"ON"}'

Likely this device is already on the list under some other brand. Looks a bit like chinese whitelabel stuff to me.
This is the product url.

[Koenkk]

Code looks good! The template will indeed be generated with the next z2m release.