1.19.0

Notes

• Home Assistant addon users who don't see the update and are still on 1.18.1, make sure to switch to the new repo
• The commissioning and backup procedure has heavily been refactored. Backups of Texas Instruments Zigbee 3.0 coordinator are now stored in the zigpy/open-coordinator-backup format. The backup/restore procedure also has been improved. It's now possible to switch between Texas Instruments Zigbee 3.0 coordinator without reflashing it (e.g. CC2538 -> CC2652). WARNING: once you start a new network or restore one on this release it will not be possible to downgrade to earlier Zigbee2MQTT versions. If you already have a network on Zigbee2MQTT < 1.19.0 and you upgrade to this release, it is possible to downgrade to earlier versions of Zigbee2MQTT.

Improvements

• #7571 Add filtered_optimistic device option (documentation)
• #2441 Improve color sync functionality and allow to disable
• #7455 Add skip_disable_reporting to unbind group/remove
• #303 Fix extended pan ID not being set correctly
• Turn on adapter LED when joining is enabled
• #2532 Remove configureKey
• Home Assistant: don't publish mocked values anymore replaced by unknown state in #7032
• #2540 Added default beep values for STS-PRS-251 expose
• #7298 Make Node.js 16 supported
• #2550 Adds ballast config CCT5010-0001
• #42 Add OTA for Lupus LS12128
• #2582 Fix EcoDim ED-10011 actions
• #2592 Improve Danfoss 014G2461 and Hive UK7004240 support
• #2634 New features for ID LOCK 150
• #2631 Make TS0216 turn on at volume 0 instead of 10

Fixes

• #7571 Honour optimistic false for groups
• #2541 Fix unknown power source for LXN59-2S7LX1.0
• #7292 Recognise LXT56-LS27LX1.7 as 3A12S-15
• #7290 Xiaomi SJCGQ11LM remove tamper
• #7326 Fix device not removed from group in configuration.yaml upon device removal
• #7330 Correct unknown powerSource for lights supporting only brightness
• #7220 Fix color_mode missing for lights with multiple endpoints.
• #449 Can't set Settings > Serial > adapter to null
• #2564 Fix EcoDim ED-10011 actions
• #7426 Fix json schema default values and examples
• #2565 Fix fan modes for 99432
• #2569 OSRAM CLA60 RGBW Z3 does not support startupColorTemp
• #2552 Fix Ubisys C4 UNSUPPORTED_ATTRIBUTE on writing configure_device_setup
• #2565 Xiaomi DJT11LM expose action angle
• #2577 Updated reporting defaults for Develco devices
• #7470 Fix controlling heat endpoint with occupied_heating_setpoint_heat not working
• #2584 SG-V100-ZB does not support battery voltage reporting
• #2603 Remove SEA801-Zigbee/SEA802-Zigbee running_state since it doesn't support it
• #2609 Fix TS0210 vibration not reset to false
• #2596 Remove voltage expose of SG-V100-ZB
• #7567 Fix commandProgrammingEventNotification missing pin
• #2626 Fix InstaRemote action exposes
• #2463 Fix Yookee D10110 received position inverted
• #7603 Fix outdated network address shown in frontend
• #7603 Show network address as hex in graphviz and plantuml network map

New supported devices

This release adds support for 49 new devices:

• 0140302 Idinio Zigbee LED foot dimmer
• 1742030P7 Philips Hue Calla outdoor
• 1745530P7 Philips Hue Nyro
• 4090330P9 Philips Hue Ensis
• 9290022943 Philips Hue white E12
• 929002376401 Philips Hue Iris gold limited edition (generation 4)
• 929002376701 Philips Hue Iris silver limited edition (generation 4)
• AQSZB-110 Develco Air quality sensor
• AV2010/21C SMaBiT Ultra-flat magnetic contact sensor
• CCT5011-0001/MEG5011-0001 Schneider Electric Micro module switch
• CCTFR6400 Schneider Electric Temperature/Humidity measurement with thermostat interface
• CCTFR6700 Schneider Electric Heating thermostat
• DSZ01 J.XUAN Door or window contact switch
• E1836 IKEA ASKVADER on/off switch
• EER40030 Schneider Electric Zigbee smart plug with power meter
• EER42000 Schneider Electric Zigbee load actuator with power meter
• EER50000 Schneider Electric Wiser H-Relay (HACT)
• EER51000 Schneider Electric Wiser thermostat (RTS)
• EER53000 Schneider Electric Wiser radiator thermostat (VACT)
• F-ADT-WTR-1 SmartThings ADT water leak detector
• FLSZB-110 Develco Flood alarm device
• HK-ZD-CCT-A Sunricher 50W Zigbee CCT LED driver (constant current)
• HS1MS-EF HEIMAN Smart motion sensor
• HS1MS-M HEIMAN Smart motion sensor
• HSC1-WD-0 ROOME Door or window contact switch
• LED1925G6 IKEA TRADFRI LED bulb E14 470 lumen, opal, dimmable, white spectrum, color spectrum
• LED1935C3 IKEA TRADFRI LED bulb E14 WW clear 250 lumen, dimmable
• OPL 130 C Innr Outdoor smart pedestal light colour
• PRZ01 J.XUAN Human body movement sensor
• R9077 Woox RGB+CCT LED
• RC 110 Innr Innr RC 110 Remote Control
• ROB_200-006-0 ROBB ZigBee LED dimmer
• RSL 110 Innr Recessed spot light
• SM323 Samotech ZigBee retrofit dimmer 250W
• SPZ01 J.XUAN plug
• TS004F TuYa Wireless switch with 4 buttons
• TS011F_plug TuYa Smart plug
• TS0601_air_quality_sensor Tuya Air quality sensor
• TS0601_temperature_humidity_sensor Tuya Temperature & humidity sensor
• WDE002334 Schneider Electric Rotary dimmer
• WRS-R02 Xiaomi Aqara wireless remote switch H1 (double rocker)
• WSZ01 J.XUAN Wireless switch
• ZB-SW04 eWeLink Smart light switch - 4 gang
• ZB006-X Fantem Smart dimmer module without neutral
• ZNCJMB14LM Xiaomi Aqara S1 smart touch panel
• ZSS-ZK-THL Moes Smart temperature and humidity meter with display
• ZTS-EU_2gang Moes Wall touch light switch (2 gang)
• 4090431P9 Philips Hue Flourish white and color ambiance table light with Bluetooth
• XDD11LM Xiaomi Aqara Opple MX960

1.18.3

Notes

• Home Assistant users: due to #7057 at least Home Assistant 2021.4.5 is required
• The famous devices.js file has been removed. Due to the amount of supported devices this file became very big (17K+ lines) and was therefore barely loadable in e.g. the Github web editor. This file has been split per vendor. The How to support new devices guide has been rewritten to use external converters instead.

Improvements

• #7064 Add log_symlink_current option to create symlink to current logs in log directory (documentation)
• #6906 Add OTA update for some Xiaomi devices
• #2455 Support power_outage_memory for Xiaomi ZNLDP12LM
• #7127 Support binding of server clusters towards clients
• #2501 Yale YRD226/246 TSDB support pincode management
• #7057 Home Assistant: use color_mode for lights
• #2509 Xiaomi SSM-U01 add switch_type and power_outage_memory
• #2514 Added lock user status functions for YRD246 lock
• #7242 Only attempt to configure end device when message is received from it

Fixes

• #2442 Fix Fantem ZB003-X not reporting data
• #2440 Fix Ubisys OTA not working for new OTA files
• #2445 Fix Lidl bulb color capabilities
• #2444 Fix color temp percent nog sticking to min/max range of bulb
• #6713 Fix Tuya TS0121_plug not reporting power anymore after restart via frontend
• #7011 Fix power source being Unknown for lights
• #6987 Home Assistant fix template rendering warnings for dictionary missing attribute
• #430 Fix device option set to null instead of removed when sending null
• #2472 Fix Aqara D1 action expose data
• #6905 Fix optimistic group state property not postfixed with endpoint name when necessary.
• #6905 Fix state of group not changing when state of specific endpoint is changed
• #7004 Fix high CPU usage with Deconz adapter
• #7088 LED Driver TuYa TS0503B RGB UNSUPPORTED_ATTRIBUTE when try restore color
• #2479 Fix Bitron 902010/29 exposes as smoke sensor (while it is only a siren)
• #7038 Fix brightness state incorrect when brightness_step with transition is stopped with brightness_step 0
• #2487 Correct get/set position for bticino 4027C
• #7074 Home Assistant: fix device_automation not published when homeassistant is in device options
• #2498 AU-A1VG125Z5E/19 turns off at brightness 1
• #2485 Improve reliability of interview procedure
• #7106 Fix brightness of light not restored correctly after restart when transition is used
• #2503 Fix position being a string
• #2507 SMSZB-120: added test, removed tamper
• #7038 Fix state of all members except first incorrect when brightness_move is send to group
• #7200 Force powerSource to battery for Ikea E1525/E1745
• #2512 Fix controlling of TI0001-switch-2gang not working
• #2518 Fix TuYa TS0013 and TS0014 reporting battery power source
• #2517 Fix TuYa TS0013 and TS0014 automatically turning off after 2 minutes
• #2519 Fix TuYa WHD02 reported as unsupported when it doesn't report a modelID
• #7230 Properly handle SIGTERM and other kernel events
• #4472 Fix STS-PRS-251 beep not working
• #719 Fix HCHO sensor unit (mg/m³)
• #2530 Fixed battery voltage conversion for HMSZB-110
• #7088 TS0505B doesn't support enhancedHue
• #7229 Remove running_state expose from TS0601_thermostat

New supported devices

This release adds support for 30 new devices:

• 0402946 Datek Zigbee module for ID lock 150
• 07089L Immax NEO SMART LED E27 5W
• 10297665 HORNBACH FLAIR Viyu Smart LED bulb CCT E27 filament
• 141L100RC Aldi MEGOS switch and dimming light remote control
• 1GNNTS WETEN 1 gang no neutral touch wall switch
• 3417711P6 Philips Hue white ambiance Adore wall light
• 3418631P6 Philips Hue Adore bathroom mirror
• 4062172044776 OSRAM OSRAM Zigbee 3.0 DALI CONV LI dimmer for DALI-based luminaires
• 4512729 Namron Zigbee 2 channel switch K4 white
• 5120.1200 Iluminize Zigbee 3.0 switch mini 1x230V with neutral, 200W/400W
• 57008000 Insta Blinds actor with lift/tilt calibration & with with inputs for wall switches
• 5995111U5 Philips Hue white ambiance 5/6" retrofit recessed downlight
• 5p1vj8r Smart9 Smoke sensor
• 73807 Sylvania LIGHTIFY LED soft white dimmable BR30
• AU-A1VG125Z5E/19 Aurora Lighting AOne 4W smart dimmable G125 lamp 1900K
• AU-A1VGSZ5E/19 Aurora Lighting AOne 4W smart dimmable Vintage GLS lamp 1900K
• CB432 OWON 32A/63A power circuit breaker
• EasyCode903G2.1 EasyAccess EasyFinger V2
• FK_V02 FrankEver Zigbee smart water valve
• PIR313-E OWON Motion sensor
• ROB_200-009-0 ROBB Zigbee 2 button wall switch
• RSL 115 Innr Recessed spot light
• SMRZB-143 Develco Smart cable
• SR-ZG9080A Sunricher Curtain motor controller
• TS011F_wall_outlet TuYa In-wall outlet
• TS0601_din TuYa Zigbee smart energy meter DDS238-2 Zigbee
• TS0601_gas_sensor TuYa gas sensor
• ZB-5004 RGB Genie Zigbee 3.0 remote control
• ZG401224 Matcall LED dimmer driver
• ZG430700 Matcall LED dimmer driver

1.18.2

Notes

• Zigbee2MQTT has now been integrated with Xiamoli cloud. The new Xiaomli cloud integration marks the start of a new era for Zigbee2MQTT. By connecting to the Xiaomli cloud Zigbee2MQTT will be able to offer a better user experience to its user. By centralizing all Zigbee2MQTT services in the Xiaomli cloud people can easily view other running Zigbee2MQTT instances all over the world! This opens up the possibility to e.g. easily share configuration with each other. Zigbee2MQTT users now have insight in what other Zigbee devices people are using which makes it easier to decide what Zigbee device to buy next, how awesome! To start using the Xiaomli integration, the only thing you need to do is accepting the user agreement in the frontend. Want to discuss this superb amazing new feature? Feel free to join the discussion here: #6908. Happy April fools day!

• If you are using the Home Assistant integration, make sure you are at least on Home Assistant 2021.3.0 (due to #6544)

Improvements

• #2283 Add color_mode property which indicates the color mode of a device (color_temp, xy, hs)
• #2326 Support on_time and off_wait_time for turning ON devices
• #2309 Improvements related to ptvo.switch
• #2295 SmartThings IM6001-MPP01 expose x/y/z axis values
• #2312 BHT-002-GCLZB enable local temperature calibration
• #6532 Increase default OTA update interval to 1 day (from 10 minutes)
• #2315 Add support for battery reporting for ZS232000178
• #2320 Set color_temp range for Müller Licht 404006/404008/404004
• #2317 BHT-002-GCLZB thermostat improvements
• #2318 Allow get on keypad_lockout
• #2331 Fix Fantem MultiSensor ZB003-X occupancy and add illumination sensor and add tamper detection
• #2333 BHT-002-GCLZB expose maximum temperature limit
• #2337 Danfoss 014G2461 battery reporting and read keypad_lockout
• #2351 Support window_open for Viessmann ZK03840
• #2347 Sonoff SNZB-02 and SNZB-04 more accurate battery reporting
• #2370 Support occupancy for CentraLite 3400-D
• #2372 Viessmann TRV ZK03840 support window_open_force and assembly_mode
• #2378 Cleanup versions for Heiman HS1DS and HS3DS
• #2373 Correct expose type for keypad lockout
• #2402 Improve bTicino *4027C support
• #2404 Danfoss Ally Themrostat 014G2461 improvements and fixes
• #2407 Improve support for Livolo TI0001-cover
• #2405 Zemismart ZM-CSW032-D Curtain/roller blind switch get and set position

Fixes

• #6500 Xiaomi lights don't support color_temp_startup
• #6520 Fix TS0012 marked as battery device
• #6562 Mark QBKG21LM and QBKG22LM as EndDevice
• #6580 Fix no attribute property in configured_reportings when attribute is manufacturer specific
• #2322 Fix battery reporting for XHS2-UE contact sensor
• #2322 Support temperature and humidity for Iris 1117-S motion sensor
• #2322 Linkind ZS190000118 support power_on_behavior
• #6593 Force WSDCGQ11LM powerSource to battery
• #2268 Fix Moes thermostat negative local temperature
• #2338 Fix Legrand 067776 being inverted
• #6021 SmartThings F-MLT-US-2 fix unknown power source
• #6636 Set battery voltage unit to millivolts instead of volts
• #6628 Fix restart not reloading configuration
• #2346 Fix incorrect child_lock state, LOCKED -> LOCK, UNLOCKED -> UNLOCK
• #6601 Fix TuYa cover position updating incorrectly
• #2359 Remove tamper for SNZB-04 since device does not support it
• #2377 Fix EchoStar SAGE206612 Doorbell channels state
• #2387 Fix STS-IRM-250 battery reporting
• #2390 Fix ETOP thermostat wrong battery_low state
• #6718 Fix incorrect group state
• #2411 Fix incorrect battery percentage for ROB_200-007-0
• #6810 Fix no transaction in group and bind responses
• #2414 Fix HG06335 battery reporting not working
• #6836 Fix white colour not controllable for GL-C-007P

New supported devices

This release adds support for 44 new devices:

• 07042L Immax Neo RECUADRO SMART, color temp, dimmable, Zigbee 3.0
• 07073L Immax Neo CANTO/HIPODROMO SMART, color temp, dimmable, Zigbee 3.0
• 07088L Immax Neo SMART LED filament E27 6.3W warm white, dimmable, Zigbee 3.0
• 1741530P7 Philips Hue Lily outdoor spot light
• 33943 AwoX LED RGB & brightness
• 33944 AwoX LED E27 light with color and color temperature
• 3417931P6 Philips Hue white ambiance Adore GU10 with Bluetooth (2 spots)
• 3418131P6 Philips Hue white ambiance Adore GU10 with Bluetooth (3 spots)
• 3418411P6 Philips Hue white ambiance bathroom ceiling light Adore with Bluetooth
• 4034030P6 Philips Hue Fair with Bluetooth
• 4058075208353 LEDVANCE SMART+ gardenpole multicolour
• 43082 Enbrighten Zigbee in-wall smart dimmer
• 4512705 Namron Zigbee 4 channel remote control
• 5063231P7 Philips Hue Bluetooth white & color ambiance spot Fugato (2 spots)
• 5063431P7 Philips Hue Bluetooth White & Color Ambiance spot Fugato (4 spots)
• 5120.1210 Iluminize Zigbee 3.0 switch mini 1x230V without neutral, 200W/400W
• 545D6514 Schneider Electric LK FUGA wiser wireless double relay
• 902010/23 Bitron 4 button Zigbee remote control
• 929003017102 Philips Hue wall switch module
• AU-A1GSZ9RGBW_HV-GSCXZB269K Aurora Lighting AOne 9.5W smart RGBW GLS E27/B22
• AU-A1ZBDSS Aurora Lighting Double smart socket UK
• BAC-002-ALZB HKGK BAC series thermostat
• BPU3 AduroSmart ERIA smart plug
• CC2538.ROUTER.V2 Custom devices (DiY) MODKAM stick СС2538 router with temperature sensor
• DG6HD-1BW Leviton Zigbee in-wall smart dimmer
• GL-C-009P Gledopto Zigbee LED Controller W (pro)
• GPDRPLOP401100CE LEDVANCE Panel TW LED 625 UGR19
• HESZB-120 Develco Fire detector with siren
• HSE2905E Datek Datek Eva AMS HAN power-meter sensor
• IL06_1 Iris Contact and temperature sensor
• N20 KAMI Entry sensor
• R7060 Woox Smart garden irrigation control
• RB 172 W Innr ZigBee E27 retrofit bulb, warm dimmable 2200-2700K, 806 Lm
• RCL 110 Innr Round ceiling light
• RDCBC/Z SOHAN Electric DIN circuit breaker (1 pole / 2 poles)
• SAGE206611 Echostar SAGE by Hughes single gang light switch
• SG-V100-ZB Dawon DNS IOT remote control smart gas lock
• SLR2b Hive Dual channel heating and hot water thermostat
• TI0001-cover Livolo Zigbee roller blind motor
• W2049 IKEA STYRBAR remote control N2
• WHD02 TuYa Wall switch module
• ZB-5028 RGB Genie RGB remote with 4 endpoints and 3 scene recalls
• ZS130000178 Linkind Security system key fob
• ZTS-EU_3gang Moes Wall touch light switch (3 gang)

1.18.1

Fixes

• #6517 Fix fail to start with CC2652RB

1.18.0

Features

• Frontend
  • Added dashboard which shows an overview of all devices (experimental)
  • Setting tab now allows to change all options
• API (documentation)
  • zigbee2mqtt/bridge/request/restart has been added to allow restarting Zigbee2MQTT over MQTT
  • zigbee2mqtt/bridge/request/options has been added which allows changing all options
• User extensions API (documentation)

Improvements

• #301 Improved zigate adapter stability and functionallity
• #3653 Allow setting led_indication (green led blink on motion detection) for Hue motion sensors
• #1988 Verify checksums of Zigbee-OTA images
• Don't log publishes to bridge/info, bridge/devices and bridge/groups to reduce log spam
• #2215 Hold/release action for Xiaomi QBKG21LM
• #4884 Conbee adapter performance improvements
• #6192 Poll device which do not support reporting when controlled with TRADFRI remote control
• #621 Expose voltage sensor for Xiaomi battery powered devices
• #2217 Expose max/min color temp to Home Assistant
• #2237 Don't log no converter available for genBasic cluster
• #6133 Prevent devices always being pinged at exactly the same time
• #2241 Sinope TH1123ZB and TH1124ZB add power measurements and allow changing time display format
• #2243 Allow /get/power for Niko sockets and plugs
• #6268 OTA updates: add update_check_interval and disable_automatic_update_check options (documentation)
• #6235 Hue dimmer switch: non legacy integration differentiate between press and hold release
• #2256 TERNCY-DC01: expose battery percentage
• #2251 Add occupancy_timeout option for IKEA E1745
• #2264 Add power measurements for SR-ZG9040A
• #6397 Change +- to ≈ for OTA update message
• #2260 Add support for accelerometer axes in Samsung Smartthings Multipurpose Sensor (F-MLT-US-2)
• #26 OTA support for E12-N1E
• #2253 Allow to configure color_options
• #2273 Allow get/power for Ubisys S1/S2
• #2287 Support moving for SmartThings IM6001-MPP01
• #6428 Support battery_low and power_type for Neo NAS-AB02B0

Fixes

• #596 Add voltage sensor for TS0201
• #2187 Fix for Moes BHT-002-GCLZB clock sync
• #2190 currentHue and currentSaturation not querried anymore with /get
• #5956 Fix S9ZGBRC01 sending multiple command arm messages on single click
• #6056 Spelling correction of error message
• #6059 Fix Lidl Livarno Lux devices not changing to red color
• #5968 Siterwell GS361A-H04, system_mode and Home Assistant
• #6041 Lonsonho QS-Zigbee-D02-TRIAC-2C-LN - Failed to configure
• #6043 Fix TuYa TS0601_cover position inverted
• #6066 Don't allow adding groups with invalid name
• #5814 Fix Lidl motion sensor (HG06335) and door/window sensor (HG06336) interview failing when pairing close to coordinator
• #6190 Mark TS0011 as AC powered (not battery)
• #6180 Fix no battery reports for TuYa TS0041
• #2818 Fix no occupancy false for TS0202 from CR Smart Home
• #6196 Fix failed to setup reporting for Lidl Livarno Lux lights
• #6191 Fix configured reporting not working after setup
• #2217 Don't exposes out of range presets for color temperature
• #6266 Add missing "many" action for Xiaomi WXKG01LM
• #2246 Correct color temperature range for Innr RS 229 T
• #6228 Fix some versions for Moes ZK-EU-2U plug USB not controllable
• #6331 Fix no battery reported for TS0042
• #6402 Disable xy color mode for AC03647 and AC03645
• #2291 SmartThings F-MLT-US-2 fix battery readings
• #2292 Fix arm mode values
• #2298 Fix running state incorrect for TuYa covers
• #2299 Separate Ubisys S1 and S1-R to fix seMetering
• #6470 Fix TS0601 cover with manufacturer name TZE200_nogaemzt inverted
• [#6366] Fix TuYa dimmer not able to control state and brightness simultaneously
• #2307 Improve Ledvance OTA

New supported devices

• 10297667 HORNBACH FLAIR Viyu Smart LED bulb RGB E14
• 14594 Vimar Roller shutter with slat orientation and change-over relay
• 1745730V7 Philips Hue Econic outdoor Pedestal
• 1746230V7 Philips Hue Lily XL outdoor spot light
• 200106V3 LightSolutions Zigbee switch 200W
• 33957 AwoX LED light with color temperature
• 3450-L Iris Smart fob
• 4090230P9 Philips Hue Liane
• 5061031P7 Philips Hue White & Color ambience Centris ceiling light (2 spots)
• 5412748727432 Prolight E27 filament bulb dimmable
• 7ZA-A806ST-Q1R SmartThings Smart bulb
• 8718696153055 Philips Hue white table light
• 9290018194 Philips Hue white BR30
• 929002398602 Philips Hue dimmer switch
• AV2010/26 Bitron Wireless socket and brightness regulator
• AV2010/29A Bitron SMaBiT Zigbee outdoor siren
• BRHM8E27W70-I1 GS Smart dimmable, RGB + white (E27 & B22)
• BW-SS7_2gang BlitzWolf Zigbee 3.0 smart light switch module 2 gang
• C422AC11D41H140.0W Aldi MEGOS LED panel RGB+CCT 40W 3600lm 62 x 62 cm
• C422AC14D41H140.0W Aldi MEGOS LED panel RGB+CCT 40W 3600lm 30 x 120 cm
• CO-8ZBS Climax Smart carbon monoxide sensor
• E1G-G8E Sengled Multicolor light strip (2M)
• F122SB62H22A4.5W Aldi LIGHTWAY smart home LED-lamp - filament
• FC80RC Legrand Legrand (or Bticino) DIN smart relay for light control (note: Legrand 412170 may be similar to Bticino FC80RC)
• FZB8708HD-S1 Brimate Smart motion sensor
• HAL600 Schwaiger LED candle bulb E14 470 lumen, dimmable, color, white 2700K
• HM1RC-2-E HEIMAN Smart remote controller
• ICPSHC24-30-IL44-1 IKEA SILVERGLANS IP44 LED driver for wireless control (30 watt)
• K4027C/L4027C/N4027C/NT4027C BTicino Shutter SW with level control
• L122AA63H11A6.5W Aldi LIGHTWAY smart home LED-lamp - candle
• L122CB63H11A9.0W Aldi LIGHTWAY smart home LED-lamp - bulb
• L122FF63H11A5.0W Aldi LIGHTWAY smart home LED-lamp - spot
• LED1924G9 IKEA TRADFRI bulb E27 CWS 806 lumen, dimmable, color, opal white
• M415-5C BYUN Gas sensor
• POTLK-WH02 GE Outlink smart remote outlet
• RL460WHZHA69 Eaton/Halo LED Wireless Controlled LED retrofit downlight
• ROB_200-018-0 ROBB ZigBee knob smart dimmer
• RTCGQ13LM Xiaomi Aqara high precision motion sensor
• S1-R Ubisys Power switch S1-R
• SMRZB-332 Develco Smart relay DIN
• SRAC-23B-ZBSR Climax Smart siren
• SZ-DWS08 Sercomm Magnetic door & window contact sensor
• TI0001-dimmer Livolo Zigbee dimmer
• TI0001-switch-2gang Livolo Zigbee Switch 2 gang
• TS011F_2_gang_wall TuYa 2 gang wall outlet
• TS0202_CR CR Smart Home Motion sensor
• TS0504B TuYa Zigbee smart mini led strip controller 5V/12V/24V RGBW
• WLS-15ZBS Climax Water leakage sensor
• WS-15ZBS Climax Water leak sensor
• ZG2819S-CCT Sunricher Zigbee handheld remote CCT 4 channels
• ZG2858A Sunricher Zigbee handheld remote RGBCCT 3 channels
• ZHEMI101 Develco Energy meter
• ZTS-EU Moes Wall touch light switch (1 gang)

1.17.1

Notes

• New firmwares are available for:
  • Texas Instruments CC2530/CC2531: 20201127 (default) and 20201128 (default) (changelog).
  • Texas Instruments CC2652R, CC2652RB, CC1352P-2
    • Coordinator: 20210120 (changelog)
    • Router: 20210128 (changelog)
• The report feature (report: true) is now deprecated. This feature was mostly used for getting state changes of bound devices. With this release Zigbee2MQTT will automatically setup reporting when binding devices. It is also possible to configure reporting per device via zigbee2mqtt/bridge/request/device/configure_reporting or via the frontend. To migrate away from this feature remove report: true from your configuration.yaml and rebind your bound devices. Alternatively it's fine to keep report: true until this feature is fully removed, even after removal of the report feature the reportings will stay configured.

Improvements

• #5529 Setup reporting for bound devices (documentation)
• #2054 Support temperature for Xiaomi MCCGQ11LM and RTCGQ11LM
• #202 Allow joining for a specific amount of time (documentation)
• #5495 Make more use of standard Home Assistant device classes for discovery
• #2008 Support hold/release actions for Xiaomi QBKG04LM (when legacy: false is set)
• #2010 Limit color temperature to min/max range of light
• #2009 Expose hue/saturation for Hue, Ledvance (OSRAM/Sylvania) and Innr lights
• #5644 Allow string values for permit_join call
• #5537 Support specifying auth_token in a different file (documentation)
• #5557 Expose pi_heating_demand for climate device supporting it
• #5574 Expose more features for TS0601_thermostat
• #2028 Add scene_remove_all and allow hue/sat in scene_add (documentation)
• #2025 Support ballast configuration for Ubisys D1 (documentation)
• #2036 Müller Licht 404006/404008/404004 support hue/saturation
• #1986 Support action for QBKG26LM
• #2023 Support color_temp_startup for lights support color temperature
• #2049 Ubisys D1 - Add onOffTransitionTime and startUpCurrentLevel support
• #1986 Support decoupled mode and action for Xiaomi QBKG23LM
• #2074 Change reporting thresholds for AU-A1ZBPIA
• #5754 Publish settings json schema to bridge/info
• #5745 Allow to generate panID by setting pan_id: GENERATE
• #2112 Ensure battery level is available immediately after pairing
• #2113 Set correct color temperature range for some devices
• #2119 Expose coolest, cool, neutral, warm and warmest preset for color temperature lights
• #2127 Away preset temperature TuYa TS0601 thermostat
• #2154 Support device temperature for Dawon DNS PM-B540-ZB
• #2149 Moes MS-104BZ support power_on_behaviour
• #2167 OTA support for some GLEDOPTO pro products
• #18 OTA support for Danfoss Ally thermostat
• #4884 Conbee speed improvements

Fixes

• #5597 Fix disabling discovery of specific Home Assistant sensor not working
• #2005 Fix typo in spelling of triple in action enum values
• #5160 Fix state (without endpoint) in payload for QBKG03LM, QBKG12LM and LLKZMK11LM
• #5507 Fix access modes for TuYa thermostats
• #5155 Fix running value for Xiaomi ZNCLDJ11LM staying true
• #5545 Fix setting last_seen from frontend not working
• #5561 Fix MEG5113-0300/MEG5165-0000 configure failing
• #5562 Fix SNZB-02 fails to configure
• #2033 Fix BHT-002-GCLZB No converter available for commandSetTimeRequest
• #2038 Remove excessive exposes on ROBB Smarrt wall switch
• #5498 #5072 Remove voltage and current for 07048L (device does not support it)
• #5599 Fix Müller Licht Tint remote (model 404002) not sending any actions
• #1988 Fix some properties not being published when debounce is used
• #5603 Fix availability not working for Sengled E11-N1EA bulb
• #4846 Fix Securifi Peanut Plug OTA not working
• #5597 Allow disabling discovery of device_automation
• #5618 Fix not allowed friendly_names being allowed
• #5614 Fix no energy value for ZNCZ04LM
• #5635 Fix log level in frontend not updating after setting log level
• #5632 Fix DIYRuZ_rspm not controllable
• #5601 Fix force not available for TS0601_thermostat
• #5666 Fix exception when retrieving configured reportings for custom attribute
• #4879 Remove battery for TS0601_thermostat since it doesn't support it
• #5690 Fix TS0202 occupancy
• #5725 Fix group state not changing when members state changes under certain circumstances
• #5744 MFKZQ01LM non-legacy api: use side instead of action_side
• #5745 Refuse to start with invalid panID
• #5596 Fix Tuya cover open/close and inverted position
• #2100 Change default group of E1766 so it doesn't control group 0 devices
• #2102 Allow reading of power_on_behavior
• #5812 Fix nothing logged when log_level set to warn
• #2084 Correct access modes for many exposes
• #2123 Expose operation mode Xiaomi WXCJKG11LM and WXCJKG12LM
• #2124 Fix TuYa thermostats time getting out of sync
• #4939 Fix no color control of TYZS1L led strip
• #2147 Fix TuYa thermostat local_temperature and current_heating_setpoint being a string instead of number
• #2150 Fix TuYa cover not reporting state (OPEN/CLOSE)
• #4597 Fix no state updates for 4th gang of TS0601 switch
• #5928 Fix configure for ZYCT-202 failing

New supported devices

This release adds support for 83 devices:

• 100.491.61 Paul Neuhaus Q-MIA LED RGBW wall lamp, 9185-13
• 14148906L Lidl Livarno Lux mood light RGB+CCT
• 14149505L/14149506L Lidl Livarno Lux light bar RGB+CCT (black/white)
• 3216231P6 Philips Hue white ambiance Aurelle square panel light
• 3216431P6 Philips Hue Aurelle
• 33951 AwoX LED E27 white
• 404017 Müller Licht Smart power strip
• 404022 Müller Licht Tint dim remote control
• 404036 Müller Licht Tint LED-globeform white+color
• 4058075173989 LEDVANCE SMART+ indoor Undercabinet light
• 4090531P9 Philips Hue Flourish white and color ambiance ceiling light with Bluetooth
• 421782 Calex Smart Wall Switch, wall mounted RGB controller
• 5042131P9 Philips Hue White ambiance Milliskin (square)
• 5047131P9 Philips Hue White ambiance Buckram
• 5063331P7 Philips Hue Bluetooth White & Color Ambiance spot Fugato
• 511.000 Iluminize Zigbee 3.0 universal LED-controller, 5 channel 4A, RGBCCT LED
• 5120.1100 Iluminize ZigBee 3.0 Dimm-Aktor mini 1x 230V
• 5412748727388 Prolight E27 white and colour bulb
• 552-80699 Niko Smart plug with earthing pin
• 902010/128 Bitron Home wireless socket
• 929.60 Paulmann SmartHome Zigbee LED-Modul Coin 1x6W White
• 929.66 Paulmann Smart home Zigbee LED module coin 1x2.5W RGBW
• 929002376201 Philips Hue Iris (generation 2, black)
• 929002459201 Philips Hue white filament Edison ST72 E27 LED
• 9CZA-G1521-Q1A ADEO ENKI ...

1.17.0

Feature

• #3281 Official release of the new API (was already availably for some time by setting experimental -> new_api: true, this is not needed anymore) (documentation)
• Allow to manually configure reporting for a device via the API (zigbee2mqtt/bridge/request/device/configure_reporting) and the frontend (click on a device -> Reporting tab)

Improvements

• #1874 Add auto_off, led_disable_night, consumer_overload, consumer_connected, power_outage_memory for Xiaomi ZNCZ04LM plug
• #5164 Better naming for Lidl Zigbee devices
• #1843 Add scene remove command (documentation)
• #1846 Added device temperature to Aqara SSM-U01
• #1858 Add rotate action for TERNCY-SD01
• #5213 Support power on behaviour for TRADFRI E1603/E1702 TRADFRI control outlet
• #5226 Home Assistant: separate discovered name by space instead of _ when friendly_name has no _
• #4884 Improve Conbee performance
• #2921 Allow to use IKEA TRADFRI OTA test server (documentation)
• #1899 Allow TuYa thermostat calibration with negative values
• #1850 Exposes action for Ubisys S1 and S2
• #5231 Change default measurement_poll_interval for TS0121_plug and HS2SK_nxp to 60 seconds
• Expose local_temperature_calibration for thermostats supporting it
• #1947 TS0121_plug support power outage memory
• #1950 Lonsonho 11830304 support calibration, backlight_mode and motor_reversal
• #15 OTA support for TERNCY-SD01
• #5425 Separate WXKG02/03LM 2016 and 2018 model
• #5414 Clear outdated availability topics
• #5428 Support action and setup default binds for Ubisys D1
• #1984 Add dimmer configuration for ubisys D1(-R)

Fixes

• #1817 iCasa Keypad Pulse wrong battery value
• #5154 Moes BHT-002-GCLZB warnings and cannot set current_heating_setpoint
• #5161 Fix network map request failing when device has no exposes.
• #1840 Fix battery_low being a string instead of bool for TuYa thermostats
• #4926 Fix color temperature now working in scene when scene created through scene_add
• #5185 Fix invalid system mode/preset for TuYa thermostats
• #5186 Fix setting brightness via brightness_ENDPOINT not working
• #5169 Fix GL-S-003Z timeout errors
• #1864 Improved sysytem_mode/preset handling for Saswell thermostats
• #5198 Samsung SmartThings Plug (GP-WOU019BBDWG) does not support voltage and current measurements
• #5200 Fix disabling HA discovery after device was discovered
• #1875 Fix Aqara SSM-UO1 device temperature not working
• #5106 Fix no state updates when Xiaomi QBKG25LM is controlled manually
• #1892 Fix not able to set min, max comfort and eco temperature for TuYa thermostats
• Fix duplicate actions for Green Power devices
• #1896 Correct "fan only" -> "fan_only"
• #5283 Fix no effect expose for Osram color bulbs
• #5268 Fix multiple scene_add with same sceneID leading to incorrect state
• #5289 Fix no devices logged when publishing empty message to zigbee2mqtt/bridge/config/devices
• #5297 Silvercrest FB20-002 typo in brightness_step_up
• #4897 Fix incorrect picture, power source and model for HGZB-01
• #5298 Tuya/Moes radiator thermostat gives incorrect schedule information
• #1908 Add missing lock_state exposes
• #1905 HT-002-GCLZB sensor set and get uses different values
• #1925 #2274 Xiaomi Motion Sensor RTCGQ11LM not reporting occupancy true
• #1940 Fixed temperature exposes for DIYRuZ_Flower
• #1941 Fixed convertSet for DIYRuZ_Geiger
• #5336 Fix SP 120 energy value off by a factor of 100
• #1953 Fix temperature for Ecolink 4655BC0-R
• #5362 Fix Sonoff ZBMINI unknown power source
• #1961 Fix retrieving of child_lock not working for Moes BHT-002-GCLZB
• #5382 Fix no feedback on manual control of TuYa TS0001
• #5409 Fix WSDCGQ01LM/WSDCGQ11LM temperature limited to -25
• #5131 Fix no state updates from AU-A1ZB2WDM when controlled physically
• #5413 Fix incorrect brightness restored when light is turned off twice
• #5420 Fix ZIGBEE2MQTT_CONFIG_ADVANCED_NETWORK_KEY cannot be set
• #5026 Convert voltage to battery for Centralite 3400-D
• #5425 Fix debug logging not logged on frontend
• #5399 Fix Bitron AV2010/25 (watt comsumption wrong)
• #1999 Fix empty position value of the TuYa curtain

New supported devices

This release adds support for 67 devices:

• 10011723 HORNBACH FLAIR Viyu Smart LED bulb CCT E27
• 10011724 HORNBACH FLAIR Viyu Smart GU10 CCT lamp
• 14147206L Lidl Livarno Lux ceiling light
• 1743930P7 Philips Hue Outdoor Econic wall lantern
• 1745930P7 Philips Hue outdoor Impress wall lamp (low voltage)
• 3802962 Namron LED 9W RGBW E27
• 404001 Müller Licht LED bulb E27 806 lumen, dimmable
• 404002 Müller Licht Tint dim remote control
• 4058075208421 LEDVANCE SMART+ candle E14 tunable white
• 4058075485174 LEDVANCE SMART+ Lighting - Classic E14 tunable white
• 4096730P6 Philips Hue Cher ceiling light
• 5060730P7 Philips Hue Bluetooth White & Color Ambiance spot Centris
• 5996511U5 Philips Hue white and color ambiance 4" retrofit recessed downlight
• 5996611U5 Philips Hue white and color ambiance 5/6" retrofit recessed downlight
• 81849 AduroSmart ERIA build-in multi dimmer module 300W
• 81855 AduroSmart ERIA smart plug (dimmer)
• 8719514279131 Philips Hue white E27 LED bulb filament giant globe
• 89665 Namron LED Strip RGB+W (5m) IP20
• 929001821618 Philips Hue white A60 bulb E27 bluetooth
• 929002294101 Philips Hue White and Color Ambiance E12 with bluetooth
• 9290023351 Philips Hue white A21 bulb E26 with Bluetooth (1600 Lumen)
• 929002376801 Philips Hue Iris (generation 4)
• 9CZA-A806ST ADEO ENKI LEXMAN E27 LED RGBW
• 9CZA-M350ST-Q1A ADEO ENKI LEXMAN GU-10 LED RGBW
• AC25697 LEDVANCE SMART+ CLASSIC MULTICOLOUR 60 10W E27
• BW-SS7 BlitzWolf Zigbee 3.0 smart light switch module 2 gang
• ED-10010 EcoDim Zigbee 2 button wall switch - white
• ED-10013 EcoDim Zigbee 4 button wall switch - black
• ED-10014 EcoDim Zigbee 8 button wall switch - white
• ED-10015 EcoDim Zigbee 8 button wall switch - black
• F20T60A BTicino DIN power consumption module
• FC80CC Legrand Legrand (or Bticino) DIN contactor module (note: Legrand 412171 may be similar to Bticino FC80CC)
• GL-C-006P Gledopto Zigbee LED controller WW/CW plus model
• GL-G-001ZS Gledopto Smart garden lamp
• GL-MC-001P Gledopto Zigbee USB mini LED controller RGB + CCT PRO
• HG06106A Lidl Livarno Lux GU10 spot RGB
• HG06106B Lidl Livarno Lux E14 candle RGB
• HG06106C Lidl Livarno Lux E27 bulb RGB
• HG06492A Lidl Livarno Lux GU10 spot CCT
• HG06492B Lidl Livarno Lux E14 candle CCT
• HG06492C Lidl Livarno Lux E27 bulb CCT
• HGZB-01 Nue / 3A Smart Zigbee 3.0 light controller
• HLU2909K Datek APEX smart plug 16A
• HR-C99C-Z-C045 ADEO RGB CTT LEXMAN ENKI remote control
• JW-A04-CT JIAWEN LED strip light controller
• L441C/N4411C/NT4411C BTicino Dimmer switch with neutral
• L4531C BTicino Power socket with power consumption monitoring
• LED1923R5 IKEA TRADFRI LED bulb GU10 345 lumen, dimmable, white spectrum, colour spectrum
• M415-6C BYUN Smoke sensor
• MS-104BZ Moes Smart light switch module (2 gang)
• PL 115 Innr Puck Light
• SEA801-Zigbee/SEA802-Zigbee Saswell Thermostatic radiator valve
• SM-AZ713 UseeLink Smart water/gas valve
• SM-SO306EZ-10 UseeLink 4 gang switch, with USB
• SR-ZG9040A Sunricher Zigbee micro smart dimmer
• SSHM-I1 GS Smoke detector
• SSM-U02 Xiaomi Aqara single switch module T1 (without neutral). Doesn't work as a router and doesn't support power meter
• TS0014 TuYa Smart light switch - 4 gang without neutral wire
• YRD216-HA2-619 Yale Real living keyless push button deadbolt lock
• YSR-MINI-01_rgbcct YSRSAI Zigbee LED controller (RGB+CCT)
• YSR-MINI-01_wwcw YSRSAI Zigbee LED controller (WW/CW)
• Z6 Atsmart 3 gang smart wall switch (no neutral wire)
• ZB-RGBCW Lonsonho Zigbee 3.0 LED-bulb, RGBW LED
• ZB-SW01 eWeLink Smart light switch - 1 gang
• QS-Zigbee-D02-TRIAC-LLonsonho 1 gang smart dimmer switch module without neutral
• MS-SP-LE27WRGB Mycket E27 RGBW bulb
• RM3250ZB Sinope 50A Smart electrica...

1.16.2

Improvements

• #4843 Improved MQTT logging when connecting to server
• #4867 Mark Node 15 as supported
• #4552 Add humidity and temperature for Iris iL07_1
• #4936 Expose valve position for some thermostats
• #4938 Display manufacturer name for unsupported devices
• #1751 Support temperature and illuminance for Develco MOSZB-140
• #4930 Log zigbee-herdsman version on startup
• #4948 Greatly reduce amount of subscribed topics
• #4948 Add force_disable_retain option (documentation)
• #1770 Increased SNZB-02 reporting frequency
• #5034 Implement cli version of z2m
• #1791 Store default Ubisys S1/S2 bindings
• #5054 Home Assistant: don't include object_id in name if same as type (e.g. light.bulb_light -> light.bulb)
• #5014 Add host bind option for frontend (documentation)
• #1798 Add brightness_move and brightness_step for Busch-Jaeger RM01
• #1805 Use number types for TuYa thermostat temperature readings
• #5090 Don't start when extendendPanID has invalid length
• #2970 Allow read-only devices/groups files by allowing to specify devices/groups in multiple files (documentation)
• #1815 Improve scene error messages
• #1821 Сhanged priority to use external converters

Fixes

• #4827 No battery for OSRAM SMART+ 4x switch
• #4848 Fix Sonoff SNZB-03 is identified as SNZB-02
• Home Assistant: use device_class presence for presence binary sensor
• #4640 Fix duplicate messages for E1744
• Fix set/get with property including endpoint name having _ not working
• #4901 Fix unbind for default_bind_group (901) not working from frontend
• #4943 Fix state.json not pretty printed
• #4942 Fix linkquality N/A when refreshing frontend
• #1752 Fix Iris 3210-L and Centralite 4257050-ZHAC configure
• #4912 Fix devices marked unavailable in Home Assistant after restart
• #1755 Add temperature sensor plus limit network spamming to SPLZB-132
• #1768 Fix Leedarson 6ARCZABZH divided by 2
• #4969 Group state is not updating in Home Assistant

New supported devices

This release adds support for 62 devices.

• 014G2461 Danfoss Ally thermostat
• 067646 Legrand Wireless shutter switch
• 10297666 HORNBACH FLAIR Viyu Smart GU10 RGBW lamp
• 12AB Lubeez zigbee 3.0 AC dimmer
• 200403V2-B LightSolutions Mini dimmer 200W
• 4033930P6 Philips Hue white ambiance suspension Fair
• 4034031P6 Philips Hue Fair with Bluetooth
• 404024 Müller Licht Tint retro LED bulb GU10, dimmable
• 4505748C5 Philips Hue Ambiance Pendant
• 4507748C5 Philips Hue Semeru Ambiance Pendant
• 4512701 Namron Zigbee 1 channel switch K2
• 4512719 Namron Zigbee 2 channel switch K4
• 5045131P7 Philips Hue Centura
• 5996311U5 Philips Hue white ambiance 4" retrofit recessed downlight
• 902010/29 Bitron Zigbee outdoor siren
• 929.63 Paulmann SmartHome Zigbee LED-Modul Coin 1x6W Tunable White
• 9290018216 Philips Hue white A60 bulb E27 bluetooth
• 929002375901 Philips Hue Bloom with Bluetooth (White)
• 929002376001 Philips Hue Bloom with Bluetooth (Black)
• 9290024406 Philips Hue P45 light bulb
• AJ_ZB_GU10 Ajax Online Smart Zigbee pro GU10 spotlight bulb
• DIYRuZ_AirSense DIYRuZ Air quality sensor
• E1812 IKEA TRADFRI shortcut button
• FB20-002 Silvercrest Switch and dimming light remote control
• FreePad_LeTV_8 DIYRuZ LeTV 8key FreePad mod
• GL-B-001P Gledopto Smart 4W E14 RGB / CCT LED bulb pro
• GL-B-007P Gledopto Smart 6W E27 RGB / CCT LED bulb pro
• GL-B-008P Gledopto Smart 12W E27 RGB / CCT LED bulb pro
• GL-C-008P Gledopto Zigbee LED controller RGB + CCT pro model
• GL-D-003P Gledopto LED RGB + CCT downlight PRO
• GL-D-004P Gledopto LED RGB + CCT downlight PRO
• GL-D-005P Gledopto LED RGB + CCT downlight PRO
• GL-FL-005TZP Gledopto Zigbee 30W floodlight RGB CCT pro
• GL-FL-005TZS Gledopto Zigbee 30W floodlight RGB CCT plus
• GL-G-001P Gledopto Smart garden lamp Pro
• GL-H-001 Gledopto Zigbee RF Hub
• GL-S-007P Gledopto Smart RGB+CCT 4W GU10 pro model
• HG06104A Silvercrest Smart LED light strip 2M
• HG06335 Silvercrest Smart motion sensor
• HG06336 Silvercrest Smart window and door sensor
• HG06337 Silvercrest Smart Plug
• HG06338 Silvercrest 3 gang switch, possibly with USB
• HG06467 Silvercrest Smart LED string lights
• HS1CG-E_3.0 HEIMAN Combustible gas sensor
• HS1RC-EM HEIMAN Smart remote controller
• HS1VS-EF HEIMAN Vibration sensor
• JWDL001A Xiaomi Aqara embedded spot led light
• JWSP001A Xiaomi Aqara embedded spot led light
• MS-20-Z Hommyn Occupancy sensor
• OS600 Salus Controls Door or window contact sensor
• QS-Zigbee-S05-LN Lonsonho 1 gang switch module with neutral wire
• RE600 Salus Controls Router Zigbee
• SPLZB-131 Develco Power plug
• SPLZB-134 Develco Power plug (type G)
• SW600 Salus Controls Door or window contact sensor
• TERNCY-LS01 TERNCY Smart light socket
• TS011F_socket_module TuYa Socket module
• TS0215A_remote TuYa Security remote control
• TS0215A_sos TuYa SOS button
• W2-Module FireAngel Carbon monoxide sensor
• WLS600 Salus Controls Water leakage sensor
• ZB-5121 RGB Genie Micro remote and dimmer with single scene recall
• ZB-SW02 eWeLink Smart light switch - 2 gang
• ZBMINI SONOFF Zigbee two way smart switch
• ZCC-3500 KlikAanKlikUit Zigbee socket switch
• ZL100050004 Linkind Zigbee LED 7.4W BR30 bulb E26, dimmable & tunable

1.16.1

Fixes

• #460 Fix cannot connect to MQTT server when no authentication is used

1.16.0

Notes

• A new Z-Stack 3.x.0 firmware (20201026) has been published (for CC2652/CC1352) users
• Home Assistant users: the minimal required version is 0.112.0 now

Features

• #4372 Add simulated_brightness feature for (some) dimmer devices (documentation, e.g. IKEA ICTC-G-1)

Improvements

• #4758 Expose linkquality for devices who don't send messages (e.g. bulbs)
• #4647 Allow to override Home Assistant discovery type, e.g. to discover a switch as a light (documentation)
• #235 Support bidirectional Z-stack 3.x.0 <-> Z-stack 3.0.x migration (docs)
• #4466 Add exposes for lights and switches
• Add effect command (documentation)
• #4503 Support USB control for ZK-EU-2U
• #1619 Updates for Moes BHT-002-GCLZB
• #4524 Add optimistic option (documentation)
• #1634 Emulate release event for Aqara Opple
• #4593 Allow to redefine Home Assistant discovery entity type and object_id
• #30 Store default_bind_group aka 901 in bindings
• Deconz adapter stability en performance improvements
• #3461 Don't republish identical optimistic group states
• #4641 Bitron thermostat (AV2010/32) support system_mode
• Support OTA for TuYa TS0601_thermostat
• #1659 ubisys D1: Allow ballast configuration (documentation)
• #1658 ubisys: Allow to configure device inputs using templates (documentation)
• #4683 Support operation mode and action for QBKG24LM
• #775 Home Assistant: provide multiple availability topics through availability
• #14 Support OTA for Securifi PP-WHT-US Peanut plug
• #1715 Ecolink 4655BC0-R contact - add temperature

Fixes

• #4512 Fix non-existing devices ending up in database.db
• #1506 Fix illuminance_lux calculation
• #3807 Fix gama correction for RGB
• #4543 Fix touchlink factory reset failing with ''BUFFER' not available error
• #4564 Fix /get to group failing
• #4266 Fix last seen unknown when opening frontend
• #4585 Fix no position update for Xiaomi curtains on stop
• #4598 Fix configure failing for MS-104Z-1
• #4617 Aqara Switch QBKG12LM reports 'single_undefined' action every 5 minutes
• #4266 Fix frontend not loading after update
• #4569 Fix Xiaomi smoke sensor not correctly enrolled
• #1652 Fix inconsistent action for TS0042, TS0043 and TS0044
• #1655 Fix Sinope TH1123ZB piHeatingDemand
• #4653 Sonoff SNZB-02 wrong identified as SNZB-04
• #4597 Fix configure failing for TS0601_switch_2_gang.
• #1664 fix support for adurosmart light bulbs
• #4618 Error on level control for Busch-Jaeger 6715 (RM01)
• #4689 Add unit_of_measurement for DIYRuZ_Geiger
• Fix 0x0000000000000000 in networkmap
• #1686 Update BE468 to have both BE468/GBAK working
• #1691 fix: support colortemp for Philips Hue Discover
• #1707 Fix MCT-340 E configure failing
• #4769 Inconsistent return values when getting hue and saturation
• #1713 correct typo in modelID attr in Salus device update check
• #4629 Fix SZ-DWS04 configure failing
• #1718 read timeout and sensitivity during configure for Hue motion sensors
• #4701 Fix end device not reachable after some time when directly connected to the coordinator

New supported devices

• 07703L Immax Radiator valve
• 100.001.96 Paul Neuhaus Q-LED Lamp RGBW E27 socket
• 10011722 HORNBACH FLAIR Viyu Smarte LED candle E14
• 3216331P6 Philips Hue white ambiance Aurelle rectangle panel light
• 3261030P6 Philips Hue Being black
• 3261031P6 Philips Hue Being white
• 3261048P6 Philips Hue Being aluminium
• 3802964 Namron LED 5,3W CCT E14
• 3A12S-15 Nue / 3A Smart Zigbee 3.0 strip light controller
• 404023 Müller Licht LED bulb E27 470 lumen, dimmable, clear
• 43090 Enbrighten Zigbee in-wall smart dimmer
• 5062148P7 Philips Hue white and color ambience Argenta spot aluminium (1 spot)
• 5062248P7 Philips Hue white and color ambience Argenta spot aluminium (2 spots)
• 5062348P7 Philips Hue white and color ambience Argenta spot aluminium (3 spots)
• 5062448P7 Philips Hue white and color ambience Argenta spot aluminium (4 spots)
• 7531609 Philips Hue Phoenix downlight
• 9290022890 Philips Hue white and color ambiance LightStrip outdoor 2m
• 9290022944 Philips Hue white ambiance E14 (with Bluetooth)
• 929002376101 Philips Hue Iris (generation 2)
• AU-A1ZBPIA Aurora Lighting Aurora smart plug
• DIYRuZ_Flower DIYRuZ Flower sensor
• GL-C-006S Gledopto Zigbee LED controller WW/CW plus model
• HGZB-13A Nue / 3A Door/window sensor
• HMSZB-110 Develco Temperature & humidity sensor
• HS1SA HEIMAN Smoke detector
• HS2SK_nxp HEIMAN Smart metering plug
• HV-GSCXZB229B Hive Active light, warm to cool white (E27 & B22)
• HY08WE TuYa Wall-mount thermostat
• ICZB-R12D iCasa Zigbee AC dimmer
• ICZB-RM11S iCasa Zigbee 3.0 remote control
• JS-SLK2-ZB JAVIS Intelligent biometric digital lock
• LXN59-1S7LX1.0 Nue / 3A Smart light relay - 1 gang
• MOSZB-140 Develco Motion sensor
• PS-ZIGBEE-SMART-CONTROLER-1CH-DIMMABLE Niviss Zigbee smart controller
• SEA801-Zigbee Saswell Thermostatic radiator valve
• SEA802-Zigbee Saswell Thermostatic radiator valve
• SLR2 Hive Dual channel heating and hot water thermostat
• SLT3 Hive Heating thermostat remote control
• SLT3B Hive Heating thermostat remote control
• SPLZB-132 Develco Power plug
• SR600 Salus Controls Relay switch
• SSM-U01 Xiaomi Aqara single switch module T1 (with neutral)
• STSS-IRM-001 SmartThings Motion sensor (2013 model)
• TS011F TuYa Socket module
• TS0216 TuYa Sound and flash siren
• TS0505A_led TuYa RGB+CCT LED
• TS0601_curtain_switch TuYa Curtain switch
• TS0601_dimmer TuYa Zigbee smart dimmer
• TS0601_roller_blind TuYa Roller blind motor
• TS130F TuYa Curtain/blind switch
• WISZB-120 Develco Window sensor
• XHS2-UE Universal Electronics Inc Magnetic door & window contact sensor