Repository navigation
MPC 600 S, LA Version 1.2
New: S600 MULTI, multisample instruments. A third program Type (MPC, S600, S600 MULTI). One pad, the Instrument (Inst in Program Config), plays samples from the program's pads across the keyboard: up to 32 keygroups, each with two velocity zones, its root, tuning, level and pan; shared S600 envelopes, filter and LFO; key tracking (KEY>PAN, KEY>FILTER, KEY>LEVEL, KEY>ENV) with instrument templates. A keyboard view on the Keygroup page, K1 through the keygroups, keys and pads to set roots, ranges and zones.
Auto Sampler: play each note asked for ("Ready for Sample 1, Velocity 1"); , , ; at the end each sample's pitch is detected and everything is mapped by pitch and velocity, onto pads in pitch order. 12-bit mono at 29.76 kHz to start.
Auto Map builds the keygroups from the pads, the roots from file names and pitch detection; Root Auto-Detect gives S600 sounds their root note when loaded, so MIDI keys play them at true pitch. S600 programs get an Instrument too (A01, or LAST PAD).
S600 Mod page (B2: Filter, LFO, Mod): the mod wheel on pitch (vibrato), filter (LFO movement, or OPEN: the cutoff opened) and level (tremolo), and the pitch bend range. The Main page: Poly, Legato, Portamento, Note On, Root Note (Auto-Detect).
Insert effects (mixer: SHIFT + B3 FX Sends, then SHIFT + B3 again): effects in any track's channel, in series before its fader, pan and sends. 8 insert slots shared across all tracks, each effect using what it costs (reverbs 4, amps, delays and modulation 2, EQs, dynamics and drives 1), with a live CPU meter. Saved with the project and included in exports.
All On envelope template, the new default for S600 sounds: full level from note start until release.
Zone Assign TRANSIENT (CHOP): a zone at every drum hit of a break, found at once: kicks, snares, hats and ghost notes, each zone starting just before its hit. Sensitivity 1-10, starts movable a millisecond at a time, for a false hit.
Loading a program asks first, naming the program it goes into (the wheel picks another; loads into the first empty program).
New: Live Looper. On Audiotrack Record, B2 : one-pass takes drop onto pads while the sequence keeps looping. Layer take after take without stopping; removes the last one. Live Loop Conversion (Additional Settings 2): IMMEDIATE converts during the pass, so the take drops in a few ms after it; AFTER 1ST LOOP drops in the raw take and converts while it plays, suited to longer takes.
Footswitch AUDIO REC (MIDI Settings, Sustain: FOOTSWITCH): the pedal is / on Audiotrack Record and Live Looper, and on any page once Live Looper takes have started.
Footswitch setup (MIDI Settings): Foot Chn (ANY to start, so any keyboard's pedal works), Foot CC (64 to start) and Polarity (AUTO works out a pedal that rests "down"; or NORMAL, INVERTED). sets all three from one press of the pedal, and the bottom line shows what the pedal last sent.
Additional Settings on two pages. Page 2 holds Loop Conv and the start values for every recording page: Sample Rate (29.76 kHz; the slider's rates, or SET to any rate), Bit Rate (12), Anti-Aliasing and Normalize (on), Input Thru (always on, or off) and Rec Mode (stereo; Convert Sample stays mono).
Metronome: Audio Rec (click during audio track and Live Looper takes, default NO) and After Loop (click after a Live Looper take, default STOP).
SAMPLE + pad selects a pad without playing it in every mode (Note Repeat, Local Mode off, MIDI tracks): set a loop's volume without retriggering it.
Fixed: Master Effects are no longer kept in the settings file: they start off at power-on unless the Autoload project has them.
Install: extract MPC-600-S-OS-v1.2.zip and copy the autorun folder to the SD card root, replacing the old one. Your MPC600S folder is kept.