Repository navigation
MPC 600 S, LA Version 1.7
New: Layout 2000XL. Additional Settings has a new line, Layout: DEFAULT or 2000XL. On 2000XL every page takes the MPC2000XL's look: its letters, tabbed key labels and dotted lines (with Screen: MPC2000, its colour too). The main screen is laid out as on the XL (B1-B3 read TrMUTE, Tr -, Tr +; the knobs are listed along the bottom; Next: shows beside the counter while a sequence change is pending). Track Mute shows unused tracks as (Unused). Save/Load, the metronome and the envelope page have the XL's pictures. Start-up reads MPC 600 S Version 1.7.
New: USB Data Mode. Save/Load, Mode USB DATA, : the SD card becomes a USB drive on a computer without taking it out. Copy files, eject the drive on the computer, press . Use a USB data cable; a charge-only cable powers the MPC but the computer will not see the drive.
Fixed: pages opening by themselves. The page buttons (KNOB FX, PAD FX, MUTE, LEVELS, LOOP, CHOP, SAMPLE SELECT, SEQ, SAMPLE REC, PAD BANK) now act only on a whole press, down then up, held 12 ms to 4 s. A release with no press is ignored, and an ERASE tap under 12 ms is ignored (the Erase page no longer opens while turning the wheel).
Fixed: pad 12 lit yellow at start-up with Pad Lights OFF.
Fixed: sounds missing from Sample: / Snd:. A sound a pad lets go of stays in memory unless another pad plays it; loading or recording over a pad keeps the old sound. Memory holds 512 sounds.
New: Program Config. Copy and Swap work with another program's pads (the wheel picks the program). SHIFT + wheel on Snd: (and Sample:) steps only through sounds in memory that no pad plays.
Changed: Clear all on LOAD stays set for the next load.
Everything in v1.6D is included.
Install: extract MPC-600-S-OS-v1.7.zip and replace the autorun folder on the card. Your saved work, in MPC600S, is untouched.