Pocket Configurator
Warning
This page's documentation and screenshots are currently being updated as part of #680. Most information here is incomplete.
The Pocket configurator tool can be brought up any time from the terminal by running configure on a Pocket computer after installing the pocket application. It will automatically come up on application startup if there is no valid configuration present, as shown in the first screenshot below.
General Tips:
- You can paste values into number/text fields
- You can navigate around with
tabandshift+tab(and arrow keys where applicable) - You can
ctrl+aor double click number/text fields to select all - When configuring the system, fields will be pre-filled with any valid existing configuration data
- You will be shown a summary of settings before any are saved
Below are two examples of the main menu. If the configurator is started by the Pocket app itself due to a lack of a valid configuration, the red warning text in the first example will be present. If any previous configuration is present, the view option will be enabled.
There is an embedded configuration file change log that will show what fields have been changed, added, or removed. This will help you figure out why a previously valid configuration may no longer be valid.
This option shows the currently active configuration of the device. Facility authentication keys will be censored via asterisks, but can be shown via the unhide button.
