Repository navigation
Airframe
- Straps & pads is a live page, not soon. It shows the pad as a spring (stiffness,
natural frequency and the frequency above which it isolates), the strap and the strap slots
cut in the seat plate, with checks. - Arm strength as a ranking. The Arms page has a breaking load at the motor and a
comparison against the catalog's plate frames (about as strong as the 5" Freestyle). - Standard mounts by name in the designer: + Stack mount (with a
20×20/25.5×25.5/
30.5×30.5picker) and + Camera cage (with aNano 14 mm/Micro 19 mm/Full 26 mm
picker). - Ready to cut. Inside corners tighter than the cutting bit are flagged on the Frame row,
and the Export menu has a cutting-bit choice, Round inside corners to the bit and
Countersink selected plate's screw holes (toggle). Exported SVG and DXF files carry
per-plate notes and a_COUNTERSINKlayer. - Camera side plates are upright plates in the designer: counted in mass, drawn standing in
3D, laid flat in the export. - Build sheet export: an HTML page listing every plate, every screw by length and every
standoff, an assembly order and a cutting cost range from placeholder rates. - Printable parts (STL, one file per part) export: overlapping plates on one layer merge
into a single unibody with every member's holes cut through, uprights are their own parts,
each file is laid on the bed ready to slice. - The build saves its drawn frame. Save a project with a drawn frame and every Lab surface
(header, Airframe rows, 3D, Sim) reads it back next time. The project file's schema is minor
3 (file formats). - A walk-through: Design and print your own frame takes a
build from empty canvas to printed parts. - Arms generated for a layout end in a round motor pad sized to cover the motor's bolt
pattern. - Fixed: the stack fit check and drawing now use the fitted ESC's bolt pattern instead of
always30.5 × 30.5. - Fixed: autosave no longer writes over a project file that was changed from outside the app.
Propulsion
- Soft mounts is a page, not a greyed row. Pick a grommet from the catalog by Shore A,
contact area and grommet count; the natural frequency with the motor and prop on top is
computed from Gent's Shore A → Young's modulus. The Motor soft mount slider on Layout &
fit still sets the pad height. See Propulsion → Soft mounts. - The Prop guard ring is derived from the prop it wraps, so it fits the prop currently
fitted. - Fixed: the exported prop guard STL now lies flat on the bed.
Looks and polish
- Tooltips on long labels wrap to a readable width instead of running off the screen.
- The sim's ground is drawn as grass, with a procedural ring of backdrop hills behind the
course.
These builds aren't code-signed yet.
- Windows: when SmartScreen warns, click More info → Run anyway.
- macOS: after the first blocked launch, go to System Settings → Privacy & Security → Open Anyway.
Manual: https://lothal.meetdev.in · Checksums: SHA256SUMS.txt