Repository navigation
Releases
Dreamcatcher 1.4.0
Dreamcatcher 1.4.0: sync update
- SYNC. On the MAIN page, SYNC (FREE / SYNC) and BPM (40 … 240). With SYNC on, TIME, RATE, LENGTH (TAPE) and
GRAIN follow the tempo as note values (1/64 … 4 bars, dotted and triplet), offering only those that fit at the
tempo and CLOCK; the modulation keeps in phase with the beat. SYNC and BPM are saved with each preset (presets
from earlier versions load free, at 120 BPM). - LOOP LV now also sets how much of the loop the effects get (ROUTE In+Loop or Loop), not only its own sound:
turned down, the loop fades out of the delay, grains and reverb too. - On OpenGP5 0.8.0-alpha: its audio link restarts itself. Some builds never started it and played only the dry
sound. - OpenGP5 Launchpad 0.2.0 shows the Free / Sync switch and the BPM knob, following the pedal.
Flash GP-5_dreamcatcher.bin with the web flasher, Launchpad, or
gp5tool.py flash GP-5_dreamcatcher.bin --sections all. Back up your presets first if you're coming from another
firmware (its storage is wiped). SHA256SUMS has the checksum.
Dreamcatcher 1.2.0
Dreamcatcher 1.2.0
On OpenGP5 0.5.5-alpha. Flash GP-5_dreamcatcher.bin with the web flasher or gp5tool.py flash ... --sections all.
Presets from 1.0 and 1.1 come along (with the reverb off, so they sound as you saved them).
New
- Grains. The delay is read by grains (GRAIN: 6 ms ... 186 ms) that can be pitched (PITCH, with SCALE: octave up,
octave down, octaves, fifth + octave, harmony), played backwards (REVERSE) or repeated (STUTTER). Fed back, the
pitched repeats stack into a shimmer. - Overdub and freeze. Hold the foot switch while a loop plays to overdub into it (FADE sets how much of the loop
stays each pass); hold it while listening to freeze the wet sound. - TONE darkens the repeats as they go round.
- Twice the memory. The sound now runs on the pedal's control processor, which has the room: the loop is up to
1.47 s at full quality (47 s at the lowest CLOCK), the delay up to 1.16 s (37 s). - Hall reverb (new REVERB section): DECAY 0.3 s ... 27 s and HOLD, MIX, SIZE, PRE-DLY, MOD, SHIMMER. It
reverberates the wet sound and the loop; the dry guitar stays dry. - Preset names on the pedal's screen (up to 12 characters; long ones scroll), given from a computer.
- Live from a computer. Every setting can be changed while you play from OpenGP5 Launchpad (USB, OpenGP5 0.5.4).
Fixed
- With vibrato on, a rare click (the vibrato could read one sample past its buffer).
Note
- TIME's range is now 4 ms ... 1.16 s, so a saved TIME gives a longer delay than in 1.1.
Dreamcatcher 1.1.0
Dreamcatcher v1.1.0
- New lettering: Atkinson Hyperlegible Next replaces Rubik for setting names and values, and the small labels use OpenGP5’s new built-in font.
- Value bar: no longer shows a stray white pixel at its tip.
Now built on OpenGP5 0.3.0-alpha: foot switch and PARA presses register exactly once after adding debouncing; flashing from a running Dreamcatcher always reaches update mode
Dreamcatcher 1.0.1
Dreamcatcher 1.0.1: the screen's colours as designed, on OpenGP5 0.2.1-alpha.
OpenGP5 0.2.0 swapped red and blue on the screen, so 1.0 showed its gold values in blue and its violet in pink. 1.0.1 is the same firmware on the fixed platform: gold while a setting follows the knob, a violet ON pill, a pink LOOP pill. Presets saved with 1.0 are kept.
Warning
Flashing custom firmware can go wrong. Read OpenGP5's Safety notes first. Not affiliated with or endorsed by Valeton, Chase Bliss or Old Blood Noise Endeavors.
Flash from the browser with the OpenGP5 web flasher (choose Dreamcatcher), or:
python3 tools/gp5tool.py flash GP-5_dreamcatcher.bin --sections all
What Dreamcatcher is: see the 1.0 release and the README. SHA256SUMS lists the image's checksum.
Dreamcatcher 1.0.0
Dreamcatcher 1.0: an ambient texture firmware for the Valeton GP-5, built on OpenGP5 0.2.0-alpha.
Warning
Flashing custom firmware can go wrong. Read OpenGP5's Safety and Recovery notes first. Not affiliated with or endorsed by Valeton, Chase Bliss or Old Blood Noise Endeavors.
Inspired by the Chase Bliss MOOD MKII and the Old Blood Noise Endeavors Parting:
- Always-listening micro-looper: the foot switch catches the last moments as a loop; TAPE (length, speed and direction in octaves) or STRETCH (slices that creep, freeze or run backwards).
- CLOCK: the engine's sample rate, 1.4 to 44 kHz: longer loops and delays, more grit.
- Wet channel: a glitch delay that smears into reverb; once per LFO cycle CHANCE lets new sound and / or the old output in; GLITCH jumps the clock in octaves; DISSOLVE crushes or reverses; tremolo / vibrato with seven LFO shapes; a low- / high-pass filter. ROUTE sends the input, the loop or both through it.
- 8 presets, kept across power-off: highlight a slot on PRESET with the volume knob, click PARA to load it; click PARA to save the current sound; the pedal starts on the last slot.
- Controls: PARA chooses a setting, the volume knob sets it; foot switch = looper; hold PARA 3 s = effect on / off (the looper is left alone).
- A purple screen with smooth Rubik text, a pulse that follows the LFO, violet-magenta LEDs.
Flash
From the browser: OpenGP5 web flasher, choose Dreamcatcher. Or with OpenGP5's flasher:
python3 tools/gp5tool.py flash GP-5_dreamcatcher.bin --sections all
Build it yourself: git clone --recursive https://github.com/OpenGP5/Dreamcatcher.git, then see the README. SHA256SUMS lists the image's checksum. MIT licence; the screen font (Rubik) is under the SIL Open Font License.