Skip to content

Dreamcatcher 1.2.0

Choose a tag to compare

@OpenGP5 OpenGP5 released this 16 Nov 21:28
· 7 commits to main since this release

Dreamcatcher 1.2.0

On OpenGP5 0.5.5-alpha. Flash GP-5_dreamcatcher.bin with the web flasher or gp5tool.py flash ... --sections all.
Presets from 1.0 and 1.1 come along (with the reverb off, so they sound as you saved them).

New

  • Grains. The delay is read by grains (GRAIN: 6 ms ... 186 ms) that can be pitched (PITCH, with SCALE: octave up,
    octave down, octaves, fifth + octave, harmony), played backwards (REVERSE) or repeated (STUTTER). Fed back, the
    pitched repeats stack into a shimmer.
  • Overdub and freeze. Hold the foot switch while a loop plays to overdub into it (FADE sets how much of the loop
    stays each pass); hold it while listening to freeze the wet sound.
  • TONE darkens the repeats as they go round.
  • Twice the memory. The sound now runs on the pedal's control processor, which has the room: the loop is up to
    1.47 s at full quality (47 s at the lowest CLOCK), the delay up to 1.16 s (37 s).
  • Hall reverb (new REVERB section): DECAY 0.3 s ... 27 s and HOLD, MIX, SIZE, PRE-DLY, MOD, SHIMMER. It
    reverberates the wet sound and the loop; the dry guitar stays dry.
  • Preset names on the pedal's screen (up to 12 characters; long ones scroll), given from a computer.
  • Live from a computer. Every setting can be changed while you play from OpenGP5 Launchpad (USB, OpenGP5 0.5.4).

Fixed

  • With vibrato on, a rare click (the vibrato could read one sample past its buffer).

Note

  • TIME's range is now 4 ms ... 1.16 s, so a saved TIME gives a longer delay than in 1.1.