Skip to content

Getting Started

Arie J. Godschalk edited this page Nov 15, 2026 · 1 revision

Getting started

Home > Getting started

Make one named receiver

A receiver is the part of a Flow that starts when it receives your named request.

  1. Install Advanced Triggers.
  2. Create an Advanced Flow.
  3. Add This Flowcard started, choosing the variant with 1 text, 1 number, 1 yes/no.
  4. Type the name below and select the offered suggestion:
demo-hello
  1. Keep Execution at Default execution.
  2. Connect it to a timeline notification action. Put this trigger's Text 1 tag in the notification's message field.
  3. Save the Flow.

Make a sender

A sender is a card that asks the receiver to run.

  1. Add a manual Start button to a test Advanced Flow.
  2. Connect it to Start Flowcard, again choosing 1 text, 1 number, 1 yes/no.
  3. Select demo-hello in Triggername. Leave the alternative Tag name field empty.
  4. Set Text 1 to:
Hello from my Flow
  1. Set Number 1 to 42 and Yes/No 1 to checked.
  2. Explicitly check Wait to Finish for this first test.
  3. Connect the error path to a visible notification.
  4. Save, then run the sender normally.

Expected result: the receiver creates a notification saying Hello from my Flow. Its Number 1 tag contains 42 and its Yes/No 1 tag contains true.

The sender's output tags are returned results, not a copy of its input. Without a Return card, its results are empty text, 0, and false. That is normal for this first example.

If the name is missing

Save the receiver, reopen the sender's name field, and select the actual suggestion. Matching is exact, including capital letters and spaces.

Do not confuse the ordinary starter with the similarly titled Return to card. Check the formatted card text: a starter says Start, while a return card says Return to.

Next steps

Clone this wiki locally