Repository navigation
B3 ORGAN 0.2
What is new since 0.1:
Overdrive is setBfree's preamp. The simple soft clip is replaced by setBfree's model (biased transfer curve between two bass filters, feedback, sag), in integers. The nine steps (KNOB 1, or CC 93) are setBfree's overdrive.character 0, 16 … 127. Measured against a Raspberry Pi: the level of every step against "overdrive off" agrees within 0.6 dB on a single note and 1.4 dB on a chord, including the dip at step 2 and the drop of step 0 below "off". The host tests check the model against setBfree's formulas (41 dB signal to error).
Battery indicator at the bottom right of the screen: four bars, red at the last bar, a bolt when a USB host has the FM-1.
Percussion click as setBfree's: the key attack comes out as a click in the percussion (6 dB before, 16 dB now against 15 dB on the Pi).
Lower load while many keys are held.
The firmware identifies as FM-1_953 for the FM-1 Firmware Hub.
Install: download b3organ-0.2.fwsc and use the FM-1 Firmware Hub, or see the README. Please report what sounds different from setBfree.