Repository navigation
B3 ORGAN 0.6
New: output equalizer
- Bass shelf (20–200 Hz), middle peak (250 Hz–3.1 kHz) and treble shelf (4–8 kHz), each ±9 dB in 0.5 dB steps, after the Leslie and before the limiter.
- On the FM-1: on the pedal screen, SELECT goes past the two pedal drawbars to BASS, MID and TREB; ALGORITHM sets the level.
- In the web editor (Tone & Reverb): levels and frequencies, with a response curve and a Flat button. Included in Send all and in backups.
- Saved with the settings. A band at 0 dB costs no processing time; all three bands together cost about 200 µs per audio block.
Overdrive calibrated against setBfree
- The drive was measured against setBfree on a Raspberry Pi (same MIDI file, third-octave bands): drive 12 now sounds like setBfree's default (within 1–2 dB). Before, the FM-1 drove the preamp about 6 dB hotter.
- The range is now 0–20 (KNOB 3, CC 93); 20 is the old maximum.
- Your sounds stay the same: settings and your own programs 112–127 from 0.5.x are converted once on the first start (drive +4). The editor does the same when restoring a backup file made with an earlier release.
Web editor
- MIDI file player on the Monitor page (type 0 and 1 files).
Update
Flash b3organ-0.6.fwsc with the installer site or the FM-1 Firmware Hub. Settings and your own programs are kept.