Skip to content

Releases

ACSI2TNFS 1.0.0

Choose a tag to compare

@Fbeen Fbeen released this 25 Oct 22:21

The first release of ACSI2TNFS: a Raspberry Pi Pico 2 W on the ACSI port of an Atari ST,
STE, Mega ST, Mega STE or TT.

What it does

  • Settings drive (C:) in the Pico's flash, with the configuration program
    ACSITNFS.PRG, the STinG installer STINGINS.TOS and NETCLOCK.PRG.
  • Network drives: folders on a TNFS server as hard disk partitions, readable and
    writable.
  • SD card drives: folders on the micro SD card in the adapter, also without Wi-Fi.
    With a card in, writes to the network drives are cached on it (about six times faster).
  • Internet with the STinG TCP/IP stack, installed with STINGINS.TOS.
  • The clock set from the internet (NTP).
  • Update check: ACSITNFS.PRG tells you when a newer firmware is out.

Install

  1. Download acsi2tnfs.uf2 below.
  2. Hold the Pico's BOOTSEL button while you plug it into a PC, and copy the file onto the
    drive that appears. The Pico restarts and prepares its settings drive.
  3. Connect the adapter to the Atari and follow Getting started in the
    README.

Updating from an earlier build: copy the new file the same way. Your settings and your own
files on C: stay; the system files on C: are updated by themselves.

Hardware

For the boards v2 (DB19 on the board) and v2-cable (flat cable to a Lotharek
adapter, pass-through). See hardware/README.md.

Tested with

  • ST with TOS 1.04 and the adapter's own driver, with AHDI, and with EmuTOS 1.1.1
  • Mega STE with TOS 2.06 and HDDRIVER (adapter on ACSI id 1)

Good to know

  • Mega STE and TT: set the adapter to the first free ACSI id (Mega STE: 1, TT: 0).
  • Avoid Show Info on a large network or SD drive: it opens every folder and fills
    the room of the drive. With the adapter's own driver, and with HDDRIVER after console
    M, the drive starts afresh by itself; with AHDI and EmuTOS reset the Atari. See
    Empty folders.
  • File names are 8.3, and every network or SD drive is 16 MB at a time.
  • Not tested yet: the TT with AHDI in this release, an exFAT card, and the card detect
    switch of the SD socket.