Repository navigation
PMIC v0.1.9 engineering prerelease
Pre-releasePMIC v0.1.9 engineering prerelease
This release replaces v0.1.8, whose GD32 asset reported the wrong FW_VER. Two firmware bundles are attached, each with boot.bin/hex, application bin/hex, and SHA256SUMS. They were built by CI run 42032683457 from commit c846bbc; both image hashes and embedded version strings were checked.
STM32F103C8: FW_VER 0.1.8-left. PA4 is charge red, PA5 charge green, PA6 battery green, and PA7 battery red. The 0.1.8-left control logic was tested on an STM32 board at 5 V and 20 V with no battery connected, and its application was flashed and read back. The CI rebuild embeds its own build-time string. Use SWD at boot 0x08000000 and app 0x08001000; serial OTA is unsupported.
GD32F503VET6 reference target: FW_VER 0.1.0-gd32. The RT-Thread bootloader and application include UART identity/status, ADC, GPIO, PWM, CH224/TMP100 I2C, and internal-Flash OTA. The pinout is software-defined without a verified matching board. The default CI application forces charging EN off. GD32 runtime, OTA, and electrical behavior have not been tested on hardware. Do not use this image to charge a battery or flash an unverified board.
Neither image is production-qualified. Loaded charging, measurement calibration, charge cutoff, GD32 pinout, and OTA power-loss behavior require board-level testing. The 54 V threshold changes the STM32 indicator only; independent battery cutoff protection is required.