Add an installation script for Unix platforms

[ThomasGravekamp]

Add an installation script (.sh) for Unix platforms to set up a complete STM32-base workspace.

The script should do the following:

• Check for the presence of make
• Check for the presence of git
• Set up the directory structure
• Clone repositories

[phenom128]

Actually my issue is with startup_common.s not being seen.
copy the directory it lists and is seen by ls and i can edit it, i 'don't'
what I'd love is the output of 'ls -lR ~/STM32-base' if possible?
not sure if acceptable, but it's bw494540 AT gmail . com

my attempt at a script is below. my main mod is the do the 7z extraction of the ARM toolchain leaving the tar file in ~/Downloads
many thanks
weird effect from original formatting of directory structure, no idea why!

Stephen

/home/stephen/bin/setup-stm32-base.sh
#!/bin/bash
echo "Remove previous install directories and files"
#important that i forgot
cd ~ # yes ~ is not needed just clearer
rm -rf STM32-base
rm -rf STM32
rm -rf projects

echo "Creating directories"
mkdir STM32
mkdir -p STM32/STM32-base
mkdir -p STM32/STM32-base/libraries
mkdir -p STM32/STM32-base/projects
mkdir -p STM32/STM32-base/templates
mkdir -p STM32/STM32-base/tools

#sudo apt-get install make, debian build_essentials pkg

cd ~/Downloads

echo "Using xz archive already extracted"
echo "Unpacking arm toolchain tar archive as it's way faster"
#7z x gcc-arm-11.2-2022.02-x86_64-arm-none-eabi.tar.xz
tar xf gcc-arm-11.2-2022.02-x86_64-arm-none-eabi.tar
echo "Moved toolchain to ~/STM32/STM32-base/tools"
mv gcc-arm-11.2-2022.02-x86_64-arm-none-eabi ~/STM32/STM32-base/tools

# This should result in this directory structure:
cd ~/STM32/STM32-base

# ─┬ STM32
#  └┬  STM32-base
#   ├─ libraries
#   ├─ projects
#   ├─ templates
#   └┬ tools
#    ├┬ arm-none-eabi
#    │└─ ...
#    ├┬ bin
#    │ └─ ...
#    ├┬ lib
#    │└─ ...
#    └┬ share
#     └─ ...

# Install open-source ST-Link Tools
# Install the open-source alternative for ST-Link Tools. Refer to the stlink Github page for installation instructions.
# Step 2: Clone the STM32-base and STM32-base-STM32Cube repositories

# Clone the STM32-base and the STM32-base-STM32Cube repositories in the STM32-base directory.
# my gitpull script is called clone

echo "Clone github repos to ~\/STM32\/STM32 repo\'s to STM32-base & STM32-base-STM32Cube"
# original @ command muttered at me, so
cd ~/STM32/STM32-base
clone https://github.com/STM32-base/STM32-base.git
clone https://github.com/STM32-base/STM32-base-STM32Cube.git

# This should result in this directory structure:

# ─┬ STM32
#  ├─ libraries
#  ├─ projects
#  ├┬ STM32-base
#  │└─ ...
#  ├┬ STM32-base-STM32Cube
#  │└─ ...
#  ├─ templates
#  └┬ tools
#   ├─ arm-none-eabi
#   ├─ bin
#   ├─ lib
#   └─ share

# Clone the template repositories
# Clone (one of) the template repositories. 
# A template can be used as starting point for a project based on STM32-base. 
# The following templates are currently available:

# so for me
#     --no STM32-base-F0-template
#    STM32-base-F1-template
#     --no STM32-base-F2-template
#     --no STM32-base-F3-template
#    STM32-base-F4-template
#    STM32-base-F7-template

# Clone (one of) the template repositories inside the templates directory:
echo "Clone (one of) the template repositories STM32F1 inside the templates directory"
echo "Me, F1,F4 \& F7"

cd templates
echo "STM32-base\STM32-base-F1-template"
clone https://github.com/STM32-base/STM32-base-F1-template.git
echo "STM32-base/STM32-base-F4-template"
clone https://github.com/STM32-base/STM32-base-F4-template.git
echo "STM32-base/STM32-base-F7-template"
clone https://github.com/STM32-base/STM32-base-F7-template.git

# This should result in this directory structure:
# ─┬ STM32-base???
#  ├─ libraries
#  ├─ projects
#  ├─ STM32-base
#  ├┬ templates
#  │├┬ STM32-base-F0-template
#  ││└─ ...
#  │├┬ STM32-base-F1-template
#  ││└─ ...
#  │├┬ STM32-base-F4-template
#  ││└─ ...
#  │└┬ STM32-base-F7-template
#  │ └─ ...
#  └┬ tools
#   ├─ arm-none-eabi
#   ├─ bin
#   ├─ lib
#   └─ share


# You can use a template project to test your STM32-base setup. 
# Before you do that, you must create a symbolic link to both the STM32-base
# and STM32-base-STM32Cube directories.
#echo $PWD"<--------------------------------\n"
cd ~/STM32/STM32-base/templates/STM32-base-F1-template
#echo $PWD"<--------------------------------\n"
ln -s ../../STM32-base
ln -s ../../STM32-base-STM32Cube
# repeat for F4 & F7 templates? may add to version
echo "Finished"

exit

[phenom128]

One confusing thing to me at least is plethora of STM32-base directories.
Maybe number them with their level in the directory structure, i'm never sure which particular one it links too.
Again the ../../ as i never know just where the start point actually is.
All above can be removed then leaving a better understanding of the workings.
Think i know what my next attempt is :-)
Stephen

[ThomasGravekamp]

Hi Stephen,

I fixed the formatting in your first comment. Having a # in front of text will make it a header. That's how markdown works.

And yes, there are two STM32-base directories if you follow the installation guide. One is the one you create anywhere you like, to act as your workspace. The other one is a copy of this repository. Note that the top level STM32-base directory does not have to have that name.

And another bit of feedback on your installation script: I would like to stay away from using 7zip. I want to limit the number of extra application one has to have installed to be able to run this script.

[phenom128]

i tend to use midnight commander way too much, convenient but archive extraction is slow.
you might want to check the arm available formats, don't recall seeing tgz or zip under linux(???),else i would have used one;

i extract to a tar file and use that; simply me, way faster and easier whilst working on the script.
what i should do it a copy of an expanded tree.

the arm compiler extracts into gcc-long-version-string, actually it's the sub-directories need to be copied!

ok in light of comments, i'll go around it again, mind first i had STM32 at the top, that confused me,, that's on the install page as well.
original issue way not seeing startup_common.s i think, thoughts?

[phenom128]

succinct version of the lost one and now found!
apologies, i don't do html much less markdown, text, an occasional makefile and then it's usually c or perl.

i'll have another go at it.

Install guide has STM32 as a top level - confused me, also the number of STM32-base ones.
Some clarification over the STM32-base lop level and the others.

arm tools, not sure where or what i'm looking at.
the arm toolchain link, says is depreciated, and following the link leads to
https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads

now definitely confused.
they have extension xz
and i'm guessing none-linux-eabi in name and x86_64
so i used
AArch64 GNU/Linux target (aarch64-none-linux-gnu)
to arm architecture 64bit from linux platform?

arm compiler extracts into directory gcc-rather-long-version-string; but is it its sub-directories that need moving?

The common-mk file, maybe examples of where if something is in the 'wrong place' of how it's changed. I'm thinking about the arm version string directory?

i found it here for f1, similar for f4 & f7
"~/STM32-base/templates/STM32-base-F1-template/STM32-base/startup$ templates/STM32-base-F1-template/STM32-
base/startup/startup_common.s"
but it errors out as not found.
i'll re-read the setup page, i think you've changed it? nice.
stephen

[phenom128]

Current last message

> stephen@i5:~/my_stm32/templates/STM32-base-F4-template$ make
> ../../tools/bin/arm-none-eabi-g++ -c -specs=nosys.specs -Wall -Wextra -g -ffunction-sections -fdata-sections -D STM32F407xx -Wa,--defsym,CALL_ARM_SYSTEM_INIT=1 -Wl,-L./STM32-base/linker,-T./STM32-base/linker/STM32F4xx/STM32F407xE.ld -I./inc -I./STM32-base/startup -mcpu=cortex-m4 -march=armv7e-m+fp -mlittle-endian -mthumb -masm-syntax-unified -I./STM32-base-STM32Cube/CMSIS/ARM/inc -I./STM32-base-STM32Cube/CMSIS/STM32F4xx/inc -fno-threadsafe-statics -fno-rtti -fno-exceptions -fno-unwind-tables STM32-base/startup/STM32F4xx/STM32F407xx.s -o obj/startup_STM32F407xx.o
> STM32-base/startup/STM32F4xx/STM32F407xx.s: Assembler messages:
> STM32-base/startup/STM32F4xx/STM32F407xx.s:1: Error: can't open startup_common.s for reading: No such file or directory
> make: *** [STM32-base/make/common.mk:141: obj/startup_STM32F407xx.o] Error 1
> stephen@i5:~/my_stm32/templates/STM32-base-F4-template$ 
> 

this is what prompted my first comment
you may notice that its now all under '~/my_stm32'

~/my_stm32/templates/STM32-base-F4-template$ ls -l
total 52
-rw-r--r-- 1 stephen stephen 35147 Mar 30 19:02 LICENSE
-rw-r--r-- 1 stephen stephen 127 Mar 30 19:02 Makefile
drwxr-xr-x 2 stephen stephen 4096 Mar 30 19:48 obj
-rw-r--r-- 1 stephen stephen 399 Mar 30 19:02 README.md
drwxr-xr-x 2 stephen stephen 4096 Mar 30 19:02 src
lrwxrwxrwx 1 stephen stephen 16 Mar 30 19:02 STM32-base -> ../../STM32-base
lrwxrwxrwx 1 stephen stephen 26 Mar 30 19:02 STM32-base-STM32Cube -> ../../STM32-base-STM32Cube

i edited into common.mk the '-I explicit directory path for the startup_common files'
mithered on format, so it's now the middle line of 3

made no difference to the message except the my -I addition.

yell if you want the script?
hopefully it all pasted properly
stephen

[bbuyukyuksel]

@phenom128 I solved this issue: "Actually my issue is with startup_common.s not being seen."

This is the solution: #35