Repository navigation
Y2Linux 1.0 Beta 8.23
Y2Linux 1.0 Beta 8.23: updates that never hang, headphones run like stock. Linux 6.18 and the native Reborn music player for the Innioasis Y2.
Already running Y2Linux
Settings → About & Updates → Check for Updates → Update Now.
What's fixed
- Update stuck at "Installing Update – Checking the update. Step 1 of 4" for hours until you held Power. The installer is now watched: if it stops making progress for two minutes, the player restarts by itself and finishes or safely undoes the update. It also keeps a record of where it stopped, so an error report can show the cause.
- Headphones silent or stopping while skipping on some players (#52, #54). The headphone DAC is now powered exactly like on the stock firmware: its clock crystal starts together with the rest of its clock parts, the DAC stays on while the screen is on, and the headphone output stays open from track to track instead of switching off and on at every skip. Error reports now show how fast your player's crystal starts. If your player had this problem, please update and send an error report after listening for a while.
- Update Now sometimes did nothing when pressed while the player was busy checking its state; it now waits its turn.
Everything from Beta 8.22 is included.
Install (from stock)
You need SP Flash Tool v5.2032, a USB cable, Y2Linux-1.0.0-beta.8.23-first-install.zip below and the Innioasis Y2 firmware package v3.2.0 from Innioasis (only this version works; it is also your way back to stock).
- Unpack both.
- SP Flash Tool → Download Only → load
MT6582_Android_scatter.txtfrom the Y2Linux zip. Exactly BOOTIMG, RECOVERY, ANDROID and USRDATA are ticked. - Click Download and connect the switched-off Y2; wait for the green tick.
- Unplug and press Power: the player sets up its Internal Storage (a few seconds), then Y2Linux and Reborn start, music works.
- Connect the Y2 to the computer and copy (don't move)
system.imgfrom the Innioasis package into the Firmware folder on Internal Storage. The player takes the Wi-Fi/Bluetooth firmware from it and turns the radios on.
Full guide: INSTALL · How updates work: Recovery and updates · Storage: Storage · Audiobooks · Headphone settings: Headphone output · Error reports
Known issues (beta)
- Some car radios don't show the song and artist yet; we are looking into it.
- In a very long single-file book, jumping to another chapter takes 2–3 seconds.
- The highest volume is still lower than stock's, even at High; demanding headphones may want more.
- The restart fix of Beta 8.4 is not yet confirmed over many restarts. If the screen ever stays dark, hold Power for 10 s and start again.
- Battery life in sleep is not yet stock-like (about 8 mA vs stock 1.3 mA; some players draw more, #42).
- GC9503V players keep the old screen-off behaviour until a GC9503V owner has confirmed the new sequence (#45).
- The charging fix (#47) is not yet confirmed on an affected player; if yours still doesn't charge, please send a report.
- The player cannot detect wired headphones yet; the jack plays whenever no Bluetooth headphones are connected.
- BBC radio stations stream only in HLS, which the player does not play yet (planned for a later beta).
- FM radio is in the works for a later beta.
Files
Y2Linux-1.0.0-beta.8.23-first-install.zip: images, scatter files and checksums for SP Flash Tool. The data image has no SSH key (developers:tools/production/first_owner.py).manifest.json,manifest.sig,rootfs.ext4.gz,bootimg.img.gz,recovery.img.gz: the signed over-the-air update (Ed25519 keyplatform-v1-release-20261015, sequence 8607).Y2Linux-1.0.0-beta.8.23-sources-buildroot-legal-info.tar(licences, manifests, this project's packages) and the third-party, toolchain and Linux sources linked below: corresponding sources. Our own code: Y2Linux and Y2Reborn at tagbaseline-122. The headphone profiles are AutoEq results (MIT, Jaakko Pasanen); their licence ships with them.SHA256SUMSfor the attached files.
Beta software: use at your own risk. Not affiliated with Innioasis, MediaTek, Last.fm, AutoEq, Strawberry or Google. Noto Sans CJK is licensed under the SIL Open Font License 1.1. Details: Beta 8.23 report.
Sources unchanged since an earlier release
Y2Linux-sources-third-party-b24c80bffef1.tar(attached tobaseline-120), SHA-256b24c80bffef118ebe6f08843ae51e8516dd9be04decc1e76e5063c4eb7a2b2caY2Linux-sources-toolchain-f7cda4c7d213.tar(attached tobaseline-120), SHA-256f7cda4c7d2134bed15dacc7afd7e1687621a57412d60e49c725efc3880bf1bc6linux-6.18.56.tar.xz(attached tobaseline-120), SHA-2564633bbda2ab95eaf2a7af4041236451d6759c72e6946265531af4b3aacefbf89