Skip to content

Y2Linux 1.0 Beta 9.3.21

Choose a tag to compare

@SchulzCode SchulzCode released this 10 Nov 14:01
· 64 commits to main since this release

Y2Linux 1.0 Beta 9.3.21: steadier Bluetooth on a weak signal, Wi-Fi on channels 12 and 13, battery and SD card fixes.

What's new

  • Bluetooth keeps off your Wi-Fi's channel. Both share one antenna; while Wi-Fi is connected, Bluetooth now leaves the Wi-Fi network's channels alone.
  • FLAC and Opus songs have a bitrate (skins can show it). For songs already in your library, run Settings → System → Reset & Maintenance → Rebuild Music Library once.

Fixed

  • Bluetooth dropped out and then played fast when the signal got weak (far from the headphones, a body in between). After a pause in the link the player sent everything it had missed in one burst. The music now simply continues where it stopped.
  • Bluetooth headphones could go silent after the player was busy for a moment. The player now always sends something while music is on, silence if need be.
  • Starting music on slow Bluetooth headphones could fail with an error although the headphones were about to answer. The player now waits longer for them.
  • Wi-Fi networks on channel 12 or 13 never showed up. The player now listens on these channels too; no setting needed.
  • The battery was empty in the morning on players whose Wi-Fi and Bluetooth never started: such a player could not go to sleep. It sleeps now.
  • An exFAT SD card could freeze until a restart when a damaged or half-copied file on it was read.

Known issues

  • A network on channel 12 or 13 may need a second scan to appear.
  • Far from the headphones the music still pauses when the signal is lost; it no longer rushes afterwards.
  • A charge-only USB cable only charges. If your computer doesn't see the player, try a cable that transfers data with a phone.
  • Skins with their own fonts (Luna XP, Winamp and others) show boxes instead of Chinese, Japanese and Korean titles.
  • After a sleep, Bluetooth headphones reconnect within a few seconds of waking. Headphones that went back to a phone meanwhile must be picked again in Settings → Bluetooth.
  • WPA3-only Wi-Fi networks can't be joined; a "WPA2/WPA3 mixed" setting on the router works.
  • One audiobook file longer than about 36 hours may not play or not show up; split it into parts of up to 30 hours.
  • Some players turned off by themselves during playback; the cause isn't found yet.
  • Something wrong? Send an error report (Settings → System → Error Reports). Restore Previous System (Settings → System → About, tap Version seven times, then Diagnostics) takes you back to the version you had, with your data kept.

More details in plain words: Beta 9.3.21 report.

Already running Y2Linux

Settings → System → Software Update → Update Now. Your music, playlists, settings, Wi-Fi networks and Bluetooth pairings stay. (On Beta 9.2.8 and older: Settings → About & Updates → Check for Updates → Update Now.)

Install with the Innioasis Updater (easiest)

The community Innioasis Updater CE installs Y2Linux for you, on Windows, macOS and Linux. No SP Flash Tool needed.

  1. Download Innioasis Updater CE for your computer from innioasis.app and open it.
  2. Choose Y2, then Reborn (Y2Linux) and the latest release.
  3. Click Install / Restore, switch the Y2 off and connect it when the updater asks. Wait until it confirms, then unplug.
  4. Connect the Y2 to the computer and copy system.img from the Innioasis Y2 firmware package v3.2.0 into the Firmware folder on Internal Storage. The player takes the Wi-Fi/Bluetooth firmware from it and turns the radios on.

Step-by-step guides for each computer: Reborn (Y2Linux) install guide. The way back to stock is in the updater too: choose Y2 and Original Software.

Install with SP Flash Tool

You need SP Flash Tool v5.2032, a USB cable, Y2Linux-1.0.0-beta.9.3.21-first-install.zip below and the Innioasis Y2 firmware package v3.2.0 from Innioasis (only this version works; it is also your way back to stock).

  1. Unpack both.
  2. SP Flash Tool → Download Only → load MT6582_Android_scatter.txt from the Y2Linux zip. Exactly BOOTIMG, RECOVERY, ANDROID and USRDATA are ticked.
  3. Click Download and connect the switched-off Y2; wait for the green tick.
  4. Unplug and press Power: the player sets up its Internal Storage (a few seconds), then Y2Linux and Reborn start, music works.
  5. Connect the Y2 to the computer and copy (don't move) system.img from the Innioasis package into the Firmware folder on Internal Storage. The player takes the Wi-Fi/Bluetooth firmware from it and turns the radios on.

Full guide: INSTALL · How updates work: Recovery and updates · Storage: Storage · Audiobooks · Headphone settings: Headphone output · Error reports · Skins: skin guide (now with three example skins)

How it was tested

On a player with AirPods Pro: music over Bluetooth through play, a short and a long pause, a seek and several skips, with a packet every 23 milliseconds and never a gap over 40; Wi-Fi scanning and connecting; Bluetooth leaving the Wi-Fi channel within two seconds; every file on an exFAT card read without the freeze. The weak-signal fix was checked on a computer against pauses recorded on the player. New tests cover each change; the platform's full check, Reborn's workspace tests and the tests of the release images passed. Not yet tried: the weak-signal test with this release, joining a router on channel 12 or 13, other headphones than AirPods.

Files

  • Y2Linux-1.0.0-beta.9.3.21-first-install.zip: images, scatter files and checksums for SP Flash Tool. The data image has no SSH key (developers: tools/production/first_owner.py).
  • manifest.json, manifest.sig, rootfs.ext4.gz, bootimg.img.gz, recovery.img.gz: the signed over-the-air update (Ed25519 key platform-v1-release-20261015, sequence 15700).
  • Y2Linux-1.0.0-beta.9.3.21-sources-buildroot-legal-info.tar (licences, manifests, this project's packages) and the third-party, toolchain and Linux sources linked below: corresponding sources. Our own code: Y2Linux and Y2Reborn at tag baseline-232. The speaker amplifier driver is Chris Hendrickson's GPL-2.0 AW87559 driver. The headphone profiles are AutoEq results (MIT, Jaakko Pasanen); their licence ships with them.
  • SHA256SUMS for the attached files.

Beta software: use at your own risk. Not affiliated with Innioasis, MediaTek, Awinic, Last.fm, AutoEq, Strawberry, MusicBee or Google. Noto Sans CJK is licensed under the SIL Open Font License 1.1.

Sources unchanged since an earlier release