DVCSMP-3664 Fix NPE in zigbee metering plug #11345
Merged
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Contributor
Author
|
I believe this is picking up the config reporting response. |
tpmanley
approved these changes
Sep 30, 2019
zblust
added a commit
to zblust/SmartThingsPublic
that referenced
this pull request
Dec 5, 2019
* Zigbee Multi Button: Fix compilation issue * Z-Wave Multi Button: Fixed compilation error * WWST-5201 Added FP for Innr Smart Plug SP 224. (SmartThingsCommunity#11183) * [ICP-10542] Added second FP for Aurora Smart Inline Relay with mfr: Aurora (SmartThingsCommunity#11173) * Added second FP for Aurora Smart Inline Relay with mfr: Aurora. * Changed spaces to tabs * Added chceck for Aurora manufacturer for correct power meter readings. * One user's mislabeled child devices are causing 90% of our exceptions… (SmartThingsCommunity#11187) * One user's mislabeled child devices are causing 90% of our exceptions. This should fix it. * WWST-4914: implement dth for scene keypad (SmartThingsCommunity#11165) * ICP-10512: when zigbee-shade is offline, the state can change to opening/closing and won't change back. (SmartThingsCommunity#11182) * WWST-5225 WWST-5218 Added FPs for Innr Filament Bulb Vintage RF 263/ BF 263 (SmartThingsCommunity#11189) * Z-Wave Multi Metering Switch: Fix problem with automations and child devices Even though this isn't a MCD DTH it was setting the componentName and componentLabel on the child devices. The platform expects that a single component device always calls that component "main". Since these child devices had a component named something other than "main", for example "switch2", it was causing errors during operations like creating automations. https://smartthings.atlassian.net/browse/ICP-10646 * Update zigbee-multi-switch.groovy * ICP-9962 Added missing clearTamper() method for Zooz 4-in-1 (SmartThingsCommunity#11196) * Added missing clearTamper() method * Removed unschedule, added 'overwrite' flag. * Zooz 4-in-1 QA does not sign off on this DTH because illuminance does not update quickly (SmartThingsCommunity#11199) removing fingerprints until a later date * WWST-4312, WWST-4318 Added FP for Muller Licht bulbs (GU10 + Candle) with color temp range 1800-6500 K (SmartThingsCommunity#11195) * WWST-4312 WWST-4318 Replacing O's with 0's (SmartThingsCommunity#11208) * CHAD-3616 Remove duplicate Iris Keyfob fingerprint (SmartThingsCommunity#11215) * ICP-10646 Remove componentLabel and componentName from non-MCD addChildDevice calls (SmartThingsCommunity#11206) * ICP-10646 Remove componentLabel and componentName from non-MCD addChildDevice calls * ICP-9962 Update ocfDeviceType for Zooz 4-in-1 (SmartThingsCommunity#11219) * Allow user to select icon for generic child switch (SmartThingsCommunity#11220) The default icon is a light bulb but the child DTH is a generic switch. It can (is) used by many DTH's using multi component devices for switch endpoints. This allows the user to select their own icon there by allow it to be more meaningful when used a child switch or outlet. * WWST-5209 WWST-5238 WWST-5231 - Add 3 Innr bulbs to zigbee-dimmer file (SmartThingsCommunity#11222) * WWST-4826 - Fingerprint for Qubino Mini Dimmer ZMNHHD1. (SmartThingsCommunity#11216) * WWST-4826 - Fingerprint for Qubino Mini Dimmer ZMNHHD1. Code reformatting. * space after function names * ICP-9962 Re-include fingerprint for Zooz 4-in-1 sensor Including fingerprint again, as manufacturer confirmed late illuminance measurement report. (SmartThingsCommunity#11232) * WWST-5212 - INNR Smart Filament Bulb White (SmartThingsCommunity#11233) * WWST-5212 - INNR Smart Filament Bulb White E27 * DevWs * [DVCSMP-3664] Aeon Minimote: Fix NPE during button event handling if child isn't found (SmartThingsCommunity#11235) * ZLL Dimmer Bulb: Added fingerprint for Ikea TRÅDFRI Driver 10W In addition to adding the fingerprint for the TRÅDFRI Driver 10W I made the join names for the Ikea devices consistent by including "IKEA" and changing "TRADFRI" to "TRÅDFRI". https://smartthings.atlassian.net/browse/WWST-5095 * WWST-5212 fix for join names: INNR->Innr (SmartThingsCommunity#11254) * [ICP-10773] Added more supported button states for Fibaro Button. (SmartThingsCommunity#11240) * WWST-2482 - DTH for Ikea Kadrilj Roller Blind (SmartThingsCommunity#11256) WWST-2482 - DTH for Ikea Kadrilj Roller Blind * Aeotec Wallmote: Wrong buttonNumber in button events The butten events on the components were using the number of the button (1-4) when it should have always been 1. This was causing automations like those setup with Smart Lighting to not trigger. https://smartthings.atlassian.net/browse/ICP-10695 * Formatted fingerprints in a number of Zigbee/ZLL generic DTHs Went through a number of the Zigbee and ZLL DTHs and organized the fingerprints by manufacturer. I also corrected deviceJoinName issues in a few of the IKEA fingerprints. * Changing indentation from spaces to tabs * WWST-5147 Fingerprint for Everspring Door/Windows Sensor (SmartThingsCommunity#11268) * WWST-2325 - DTH for Aurora Smart PIR Motion Sensor - added Actuator and Health Check capabilities (SmartThingsCommunity#11260) * Added Actuator and Health Check capabilities * WWST-2325 - polling the device after pairing, code refactoring * DevWs for Most Target Limited containing containing SmartSense Motion Sensor * add eWeLink Door Sensor fingerprint * [ICP-10363] Fibaro Temperature Sensor (for FGT) doesn't go offline (SmartThingsCommunity#11157) * Enabled Fibaro Temperature Sensor (for FGT) to go offline when it's not available. * Few improvements to make sure that child device will go offline. * Moved child configuration to be defined in parent device handler. Extended child temperature sensor checkInterval to meet true values. * Changed child device handler name - to allow cert team to test it without tweaking DTHes by themselves. Will revert this when ready to go. * Brought back normal Device Type names. * WWST-5059 FP for Everspring Smart Plug (SmartThingsCommunity#11282) * [WWST-5169] Everspring Outdoor Floodlight integration (SmartThingsCommunity#11267) * Fingeprint and couple of tweaks for Everspring Outdoor Floodlight * Syntax & comments changes in configuration. * Configuration change to be device specific * WWST-5482 - DTH for Ikea FYRTUR block-out roller blind (SmartThingsCommunity#11283) * WWST-5482 - DTH for Ikea FYRTUR block-out roller blind * Zigbee RGBW Bulb: Fingerprint for Innr Smart GU10 Spot Colour https://smartthings.atlassian.net/projects/WWST/issues/WWST-5530 * Zigbee/ZLL DTHs: Added generic profile/deviceId/cluster fingerprints This change adds/updates the generic fingerprints to a number of the Zigbee and ZLL DTHs. These generic fingerprints are based on the profile and device id and the set of clusters used by the DTH. This should increase the number of devices that join using the most appropriate DTH even though they don't have a manufacturer/model specific fingerprint. The goal is to provide a better user experience for users who devices that have not yet gone through WWST certification but still function OK with one of our existing DTHs. https://smartthings.atlassian.net/browse/CHAD-3725 * SmartSense Open Closed Sensor: DevWS submission for INGENIUM ZB Magnetic ON/OFF Sensor (SmartThingsCommunity#11218) * DevWs for Xtreme Lighting Ltd. containing containing ZLL RGBW Bulb * Update zigbee-multi-switch.groovy * WWST add XLSmart ZLL RGBW light bulb fingerprint (SmartThingsCommunity#11297) * [ICP-10913] Zooz 4-in-1 Changed initial poll for motion status (SmartThingsCommunity#11286) * WWST-5155 / WWST-5142 Everspring sirens US/EU versions added to zwave-siren (SmartThingsCommunity#11288) * WWST-5131 Add Everspring Indoor PIR to zwave-motion-sensor (SmartThingsCommunity#11299) * ICP-10824 - Added fake 'no motion' event to pairing process for Aurora Smart PIR sensor (SmartThingsCommunity#11301) * ICP-10824 - Added fake 'no motion' event to pairing process for Aurora Smart PIR sensor. Removed 'Configuration' capability, because polling this device in pairing process didn't help. * ICP-10824 - code refactoring * WWST-5302 add eWeLink Motion Sensor fingerprint (SmartThingsCommunity#11279) * ICP-10896 Axis Gear pause support (SmartThingsCommunity#11303) The Axis Gear already had a command to stop the blinds, but this should hook it up to the Window Shade capability so that it can be used in OneApp. * ICP-10949 - Added support for capability: "Battery" for IKEA roller blinds (KADRILJ, FYRTUR). (SmartThingsCommunity#11310) ICP-10949 - Added support for capability: "Battery " for IKEA roller blinds (KADRILJ, FYRTUR) * ICP-11023 Everspring indoor motion sensor fingerprint fix. (SmartThingsCommunity#11312) * WWST-5514 Add Leedarson ilumin Dimmable Bulb to zwave-dimmer-switch-generic (SmartThingsCommunity#11313) * WWST-5500 Add Leedarson ilumin RGBW Bulb to rgbw-light (SmartThingsCommunity#11314) * DevWs for Most Target Limited containing containing SmartSense Open/Closed Sensor * ICP-10783, Fix to handle notification report for Dawon switch on/off (SmartThingsCommunity#11296) * ICP-10783, Fix to handle notification report for Dawon switch on/off Signed-off-by: Ki-wook <kiwook.hong@samsung.com> * Revert "ICP-10783, Fix to handle notification report for Dawon switch on/off" This reverts commit 8459b30. * Create a new DTH for Dawon devices Signed-off-by: Ki-wook <kiwook.hong@samsung.com> * [WWST-5042] Add Everspring On Off Plug to zwave-switch-secure (SmartThingsCommunity#11302) * Add Everspring On Off Plug to zwave-switch-secure * Everspring fingerprint moved to zwave-switch-generic * Add ocfDeviceType * Change ocfDeviceType * DevWS submission for a number of Sengled bulbs (SmartThingsCommunity#11242) * [ICP-11048/ICP-11046] Change DTH for Everspring Indoor Siren (SmartThingsCommunity#11316) * Change DTH for Everspring Indoor Siren * Spaces fix. * [WWST-5510] Add ilumi Tunable White Bulb to aeon-multiwhite-bulb (SmartThingsCommunity#11322) * Add ilumi Tunable White Bulb to aeon-multiwhite-bulb * Name fix * Child devices of hub connected devices not being added to room on join Some hub connected DTHs were not setting the hubId when creating child devices. This was resulting in the child devices not being shown in the join screen in the app which had the side effect that they were not being added to the room the user selected when enabling join. https://smartthings.atlassian.net/browse/ICP-11101 * Simulated Device Preferences: New DTH for testing device preferences This DTH shows examples of the different types of supported device preferences. It's intended for use as a reference and for testing. * WWST-5295 Added FP for Inovelli Red Series (SmartThingsCommunity#11339) * [WWST-4820] Zigbee Orvibo Scene keypad: add fingerprint for orvibo 3 key scenepad (SmartThingsCommunity#11333) * [WWST-4820] add fingerprint for orvibo 3 key scenepad * Update zigbee-scene-keypad.groovy * Update zigbee-scene-keypad.groovy * Update zigbee-scene-keypad.groovy * [ICP-11165] Zigbee ewelink motion sensor & ewelink contact sensor, fix health check issue (SmartThingsCommunity#11343) * DVCSMP-3664 Fix NPE in zigbee metering plug (SmartThingsCommunity#11345) * Simulated Device Preferences: Fixed path to DTH * [WWST-5165] Everspring Radiator Thermostat integration (SmartThingsCommunity#11285) * New DTH Z-Wave Radiator Thermostat * Tiles changes, added some range and mode checks. * JSON encoding * Simulated Device Preferences: Fix format of translations file * Add Simulated Window Shade DTH (SmartThingsCommunity#11342) * Add Simulated Window Shade DTH * DVCSMP-4708 Wallmote buttons not setting supported button values (SmartThingsCommunity#11354) * DVCSMP-4708 Wallmote buttons not setting supported button values * Fix window shade commands not being visible on device view The latest device plugin expects that devices implementing the Window Shade capability have created the supportedWindowShadeCommands event to indicate which commands they support. If that event hasnt' been generated then the plugin doesn't render the device properly. * Removed the unused "enrollResponse" custom command from all DTHs With the exception of the Tyco Door Window Sensor DTH, all these DTHs declared support for the custom command "enrollResponse" but none of them implemented that command. That's likely because in the past they did implement this command, but then we updated the DTH to use the Zigbee library version instead but forgot to remove the command. https://smartthings.atlassian.net/browse/CHAD-3850 * Icon fix * ONEAPP-15920 add Korean translation for deviceJoinName * ICP-10525 Specified metadata for Zigbee Range Extender. (SmartThingsCommunity#11359) * CHAD-3851 Move Ikea Motion and Button DTHs to public repo (SmartThingsCommunity#11377) * WWST-5489 Fingerprints correction for SYLVANIA SMART+ Flush Mount. (SmartThingsCommunity#11362) * ICP-11023 add model number for Everspring Indoor PIR (SmartThingsCommunity#11381) * WWST-5694/WWST-5698 Added FPs for two Aurora Vintage Bulbs (ST64+G125) (SmartThingsCommunity#11385) * ICP-10136, ICP-11115, ICP-11120 - Fix / Improvement for on/off statuses and power meter updates. Code refactoring. (SmartThingsCommunity#11363) * ICP-10136: Fix/improvement of power meter updates. Improvement of on/off status updates. Code refactoring - for better readability * ICP-10136 - code refactoring * add fingerprint for HONYAR outlet * [WWST-5710] - Added FP for third Aurora Vintage bulb (SmartThingsCommunity#11389) * Added FPs for two Aurora Vintage Bulbs (ST64+G125) * WWST-5710 - Added FP for third Aurora Vintage bulb * DTH for Aeotec Multisensor 6 AU region * DTH for Aeotec Smart Switch 6 and Aeotec Nano Switch AU region * DTH for Aeotec TriSensor AU region * DTH for Aeotec Door/Window Sensor AU region * DTH for Aeotec Nano Dimmer AU region * DTH for Aeotec Dual Nano Switch AU region * DTH for Aeotec Range Extender AU region * ONEAPP-17643 Read IAS Zone status sooner on startup for smartsense multi (SmartThingsCommunity#11393) * ONEAPP-17643 Read IAS Zone status sooner on startup for smartsense multi * add back in second battery read send inactive acceleration event on join * change isStateChange flag * [WWST-4453]zigbee window shade:add fingerprint of BINTHEN smart curtain (SmartThingsCommunity#11400) * add fingerprint of binthen window shade * Update zigbee-window-shade.groovy * Update zigbee-window-shade.groovy fix the indentation and move fingerprint above * Update zigbee-window-shade.groovy fix the indentation * ICP-10949: Moved IKEA shades to a new DTH (based on zigbee-window-shade), because of adding the "Battery" capability. (SmartThingsCommunity#11364) * ICP-10949: Moved IKEA shades to a new DTH (based on zigbee-window-shade), because of adding the "Battery" capability. * ICP-10949: DTH rename -> ZigBee Window Shade Battery. Added "battery level" tile. * rebase * [ICP-11031] Sending meterGet for Watss after changing dimmer value (SmartThingsCommunity#11369) * Sending meterGet for Watss after changing dimmer value * Configured additional parameters for Aeotec Nano Dimmer for more precise report of wattage * Update zwave-metering-dimmer.groovy * [WWST-5639] ewelink Motion Sensor:change the battery report interval from 1200 to 3600 according to manufacture's request (SmartThingsCommunity#11436) * [ONEAPP-18302] Z-Wave Siren: Fix infinite loop in initialization If a Z-Wave siren using this DTH fails to initialize correctly or drops offline, the DTH attempts will generate 3 or more commands every 12 seconds attempting to initialize the device correctly. This leads to the hub's buffer overflowing since it will exhaust its resources attempting to communicate the messages that are bound to fail leading to the eventual queue becoming full and dropping messages. As a result, I have chosen to cap the attempt to initialize the device after 3 attempts. https://smartthings.atlassian.net/browse/ONEAPP-18302 * ICP-10694/ICP-10750 Added generic-dimmer metadata without battery for Sengled Switch (SmartThingsCommunity#11439) * ICP-9040 Check to see if operating state from thermostat is correct when we set mode to off (SmartThingsCommunity#11171) * Spruce Scheduler weatherapi correct location for Canada (SmartThingsCommunity#9129) * Spruce Scheduler weather api updates * Spruce Sensor Gen 3 model and fingerprints update * Update check interval back to default 62 mins or greater if interval set longer * -------v2.55------------------- -update weather zipcode field to find lat&long if no zipcode found -remove zipcode page and move entry to weatherpage -correct behavior when no days selected * Comment out debug zipcode * Add additional weather check for missing location * Add additional weather check for missing location * Breakout forecast and conditions to try-catch functions to catch any thrown errors * [WWST 5866]zigbee switch: add fingerprint for honyar 1 gang switch (SmartThingsCommunity#11463) Add fingerprint for honyar 1 gang switch * ICP-10136 - Zooz Power Strip: calling sendHubCommand() once with all commands (for all endpoints) (SmartThingsCommunity#11431) * ICP-10136 - calling sendHubCommand() once with all commands (for all endpoints) * ICP-10136 - decreased delay between commands send from refresh() to 200 milliseconds * WWST-5862 Added a FP for the ABL Light (SmartThingsCommunity#11458) * [WWST-4627] New DTH for Qubino On/Off Flush Thermostat 2 (SmartThingsCommunity#11380) * New DTH for Qubino On/Off Flush Thermostat 2 * Added mode change in preferences. * Changed vid and modified 'secure' method * WWST-5910 Add POPP Flow Stop to zwave-water-valve (SmartThingsCommunity#11467) * [ICP-11308] Send motion event in installed() to fix pairing without status (SmartThingsCommunity#11391) * Send motion event in installed() to fix pairing without motion - Everspring Indoor PIR * Add notificationType with event to send motion event to device. * add fingerprint for HONYAR switch * Simulated Device Preferences: Fix 'required' field on one of the enum prefs * ICP-10136 - Zooz Power Strip: calling sendHubCommand() once with all commands (for all endpoints) (SmartThingsCommunity#11431) (SmartThingsCommunity#11483) * ICP-10136 - calling sendHubCommand() once with all commands (for all endpoints) * ICP-10136 - decreased delay between commands send from refresh() to 200 milliseconds * [WWST-5948] Zigbee Switch: add fingerprint for Terncy light socket (SmartThingsCommunity#11488) * ICP-11209 Added on command to the setColorTemp() (SmartThingsCommunity#11478) * [ICP-11078] Fibaro CO Sensor doesn't report high temperature warning (SmartThingsCommunity#11360) * Configuration change to enable temperature alarm. * Changed default value in parameter map. * Battery report fix and set temperatureAlarm event 'cleared' to be send by default * Changed configuration to enable acoustic on exceeding the temperature alarm. * [ICP-11187] Added "on" commands to the setColor() and setColorTemp() (SmartThingsCommunity#11479) * Added on commands to the setColor() and setColorTemp() * Added condition to the setColorTemp() * CHAD-3841 Low Battery Threshold Reporting (SmartThingsCommunity#11459) * CHAD-3841 Low Battery Threshold Reporting Sends a devicewatch event to register these devices for notifications when battery levels dip below certain thresholds. * add displayed: false * consolidates device watch events * DevWs for Most Target Limited containing containing SmartSense Motion Sensor and 1 more (SmartThingsCommunity#11462) * DevWs for Most Target Limited containing containing SmartSense Motion Sensor and 1 more * readd capability "Temperature Measurement" * WWST-2347 enable mcd for aeon minimote (SmartThingsCommunity#11207) * WWST-2347 enable mcd for aeon minimote * change isStateChange flag * set supportdbuttonvalues * enable update of child devices for migration to MCD * DevWs for NIE-TECH CO., LTD. containing containing Z-Wave Dual Switch (SmartThingsCommunity#11461) * DevWs for NIE-TECH CO., LTD. containing containing Z-Wave Dual Switch * Added fingerprint for EVA LOGIK Smart Plug 2CH * DevWs for NIE-TECH CO., LTD. containing containing Z-Wave Switch Generic (SmartThingsCommunity#11460) * [ICP-11154] Aurora Smart PIR Sensor - specified metadata with translations (SmartThingsCommunity#11468) * Simulated Device Preferences: Fixed type of 'number' input The number input type was 'integer' but that's not a valid type of a device preference. Fixed that and also added some additional number preferences with different types of ranges. * [ICP-11264] Providing new DTH for Everspring Outdoor Floodlight (SmartThingsCommunity#11383) * Reverting all changes in Z-Wave Motion Light Sensor and creating new DTH for Everspring Outdoor Floodlight. * Changed name of DTH to be more generic. * Fixed another wrong definition in tiles. * Couple of fixes * Added device check for configuration change. * [WWST-5902] Add POPP 10Year Smoke Sensor to zwave-smoke-alarm (SmartThingsCommunity#11481) * Add POPP 10Year Smoke Sensor to zwave-basic-smoke-alarm.groovy * WWST-5890 Fingerprint for POPP Smart Outdoor Plug (SmartThingsCommunity#11498) * CHAD-3841 Add Battery reporting thresholds for smartthings devices (SmartThingsCommunity#11499) Encode device watch values as JSON * ICP-11344 Everspring Radiator Thermostat: Configured automatic temperature reports every 15 minutes. (SmartThingsCommunity#11466) * WWST-5997/WWST-5998 Added FPs for Aeotec Recessed Door Sensors US/EU (SmartThingsCommunity#11573) * [WWST-6003/WWST-6004] Added FPs for Aeotec Range Extenders 7 US/EU (SmartThingsCommunity#11574) * Added FPs for Aeotec Range Extenders 7 US/EU * Update zwave-range-extender.groovy * Prevent logging of variables * [ICP-10361] Fibaro Heat Controller - additional temperature sensor connectivity check (SmartThingsCommunity#11451) * Code change which prevents "error indicator" to be shown as quasi correct temperature measurement. * Fixed faulty temperature check, alongside with more accurate status changes. * Forcing sending status event to child. * add fingerprint for eWeLink and SONOFF devices * [WWST-5914] POPP Radiator Thermostat integration (SmartThingsCommunity#11575) * POPP Radiator Thermostat integration * Removed 'offlinePingable' flag and fixed secure() method. * [ONEIOT-108] Simulated Device Preferences: added 'bool' input Both 'boolean' and 'bool' input types are supposed to be supported. * [ICP-11504] Added plug icon for POPP Smart Outdoor Plug (SmartThingsCommunity#11657) * Added plug icon for POPP Smart Outdoor Plug * Adjusted the configuration for the Popp Smart Plug * Child contact sensor for multi component devices (SmartThingsCommunity#11581) * Child contact sensor for multi component devices Device handlers for multi endpoint devices which have contact sensors endopints require child contact sensor DTH's. This generic child DTH serves the purpose and supports contact sensor, battery and health check. * Removed battery not required for contact endpoints * Update date * [WWST-5755] Added comment to zwave-lock to know to which name belongs to YRL 236. (SmartThingsCommunity#11741) * [WWST-5751] Add YRD156 Yale to zwave-lock.groovy (SmartThingsCommunity#11743) * Add Rooms Beautiful Range Extender to Zigbee Range Extender DTH (SmartThingsCommunity#11579) * add fingerprint for heiman temp/humidity sensor * [WWST-6039] Zigbee Motion Detector: add fingerprint for HEIMAN motion sensor (SmartThingsCommunity#11895) add fingerprint for heiman motion sensor * Axis Gear ST: Add support for Window Shade Preset in the new app (SmartThingsCommunity#11746) * [ICP-11505] Aeotec KeyFob Gen5 lacks basic functionality (SmartThingsCommunity#11742) * Providing fixes to make sure that Aeotec KeyFob Gen5 will work correctly. * Added ocfDeviceType * Added comment about Aeotec KeyFob event handling formula * add fingerprint for heiman sos button * [WWST-5980]zigbee switch: add fingerprint for heiman 1 gang switch (SmartThingsCommunity#12164) add fingerprintf for heiman 1 gang switch * [ICP-11070] Modified zwave-siren DTH, add capability Tamper for Everspring Siren. (SmartThingsCommunity#11390) * Modified zwave-siren DTH, add capability Tamper for Everspring Siren. * Add tamper capability to zwave-siren, add vid to Everspirng Siren. * Add second event for Everspring Siren * Clear tamper when receive off() * Fix for clear tamper event. * SmartSense Multi/Motion/Button: Set correct Korean join names https://smartthings.atlassian.net/browse/ONEAPP-19538 * DevWs for RoomsBeautiful containing containing Curtain (SmartThingsCommunity#11257) * DevWs for RoomsBeautiful containing containing Curtain * switched to use ZigBee Window Shade Capability * added dkirker's updates * changed vid to "generic-shade-4" * changed DTH name and removed "pause" command * fixed indenting on github * fixed indenting * Update rooms-beautiful-curtain.groovy * - * Remove old DTH and update indenting for uniformity * add fingerprint for HEIMAN water leakage sensor * WWST-4999 - Support for "Ikea Open/Close remote E1766" (SmartThingsCommunity#11497) * WWST-4999 - Support for "Ikea Open/Close remote E1766" * WWST-4999 - Second FP added * WWST-4999 - deviceJoinName changed to IKEA TRÅDFRI Open/Close Remote * DTH for WWST-4943, VISION Z-Wave Recessed D/W Sensor ZD 2105BR-5 - ANZ (SmartThingsCommunity#12174) * DTH for WWST-4943, VISION Z-Wave Recessed D/W Sensor ZD 2105BR-5 - ANZ * ICP-11490 ilumin bulb reporting intermediate level change values (SmartThingsCommunity#11745) * ICP-11490 ilumin bulb reporting intermediate level change values I think we're just querying for the level value too soon after setting it. This just adds in a small static delay to account for transmission time. * increase delay to match other DTHs * WWST-2347 Aeon Minimote: Don't create child devices if they already exist (SmartThingsCommunity#12328) If a minimote is joined with a different DTH that creates child devices and then is switched to the Aeon Minimote DTH it was getting an exception because it was trying to recreate the child devices. This change prevents it from recreating the child devices when 'installed' is called. * DevWs for NIE-TECH CO., LTD. containing containing Z-Wave Dual Switch (SmartThingsCommunity#11963) * DevWs for NIE-TECH CO., LTD. containing containing Z-Wave Dual Switch * Minoston Smart Plug 2CH * DevWs for NIE-TECH CO., LTD. containing containing Z-Wave Switch Generic (SmartThingsCommunity#11962) * DevWs for NIE-TECH CO., LTD. containing containing Z-Wave Switch Generic * Minoston Outdoor Smart Plug * fix honyar usb port can't be control issue * fix device offline issue * WWST-5496, WWST-5505 - added vid: generic-color-temperature-bulb-2700K-5000K to fingerprint * DevWs for NIE-TECH CO., LTD. containing containing Z-Wave Dimmer Switch Generic * DevWs for NIE-TECH CO., LTD. containing containing Z-Wave Switch Generic * ICP-11609 send child events as the parent as well (SmartThingsCommunity#12402) * ICP-11609 send child events as the parent as well for OneApp to change the status of the main device on the all devices view, events need to be duplicated to the parent * remove unnecessary createEvent call * add fingerprint for heiman wall socket * DevWs for FirstAlert containing containing Z-Wave Smoke Alarm (SmartThingsCommunity#12335) DevWs for FirstAlert containing containing Z-Wave Smoke Alarm * [ICP-11598] POPP Radiator Thermostat 'always online' workaround (SmartThingsCommunity#12334) * A first approach, to make device to go 'offline' properly * Changes to enable setpoint manual and wireless change in same setup * Comment position adjustment * Combining both ThermostatSetpointReport handlers * WWST-5894 Add POPP Solar Outdoor Siren to zwave-siren (SmartThingsCommunity#13514) * update model code * add fingerprint for heiman 3 gang switch * [WWST-1994] New DTH Z-Wave Basic Window Shade (Aeotec Nano Shutter) (SmartThingsCommunity#4006) * Initial commit for DTH Z-Wave Basic Window Shade. * Added setButton() method to provide OneApp compatibility. * ocfDeviceType added, fix for >1 time "pause" command selected * Metadata definition * Giving an user an oppurtinity to change direction of rolling/unrolling blinds * Preferences change and sending availableCurtainPowerButtons as JSON * ICP-11759 Added switch icon for AOne Smart Strip Controller (SmartThingsCommunity#13611) * WWST-5898 Add POPP Smoke Detector with Siren to zwave-basic-smoke-alarm (SmartThingsCommunity#13513) * WWST-6203 DTH-Fibaro KeyFob-FGKF-601 AU (SmartThingsCommunity#13610) * update heiman motion sensor manufacture * DevWS: ZP3111US 4-in-1 Motion added to zooz 4-in-1 DTH (SmartThingsCommunity#11361) * DevWs for Most Target Limited containing containing ZigBee Switch Power (SmartThingsCommunity#12030) * DevWs for Most Target Limited containing containing ZigBee Switch Power
KKlimczukS
pushed a commit
to KKlimczukS/SmartThingsPublic
that referenced
this pull request
Feb 6, 2020
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
2 participants
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.