Skip to content

SpeedBreaker v0.2.6

Latest

Choose a tag to compare

@ProjectUgarte ProjectUgarte released this 18 Nov 19:11

What's new

  • Bringing in a save (#83, #105): a save from an Xbox 360 or from another install now comes into
    the game. Quit SpeedBreaker, put the save in the save folder, and start the game again. It takes
    an Xbox 360 save package, the save file taken out of one, a save's folder copied without the small
    file that goes beside it, and the 454107D9 folder the Xenia emulator keeps its saves in. A save
    comes in only if it passes the game's own checks, the ones it runs on its own saves. What you put
    in moves to an imported folder inside the save folder, a save that's already there under the
    same name is never replaced, and import-log.txt there says what came in and what didn't. The
    save folder is ~/Library/Application Support/SpeedBreaker/save on a Mac,
    %LOCALAPPDATA%\SpeedBreaker\save on Windows, and ~/.local/share/speedbreaker/save on Linux and
    the Steam Deck. On iPhone and iPad, put it in the Files app under On My iPhone (or On My iPad) >
    SpeedBreaker instead, where the game's files go; the imported folder and import-log.txt are
    there too, and the log also says why a file there wasn't taken.
  • Sharper shadows for less work on a Mac (#90): where Shadow Resolution's Auto picked 2x
    (Internal Resolution at 2x or more), a Mac now gets a wider 3600x1600 shadow map instead of
    3200x3200. It gives back nearly all the detail across the picture that v0.2.2's fix for shadows
    missing at the sides (#81) took away, and on an M1 Pro MacBook Pro it takes 1.5 to 1.7 ms less GPU
    time a frame in a race than 2x, and about 190 MB less memory. The row shows "Auto (3600x1600)".
    Other graphics cards keep 2x, and Steam Deck and Steam Frame keep 1x.
  • A gentler Frame Rate Auto on iPhone, iPad and Mac (#71): Auto no longer drops to 30 just
    because the system reports the device as hot ("serious") while the game still holds 60. It keeps
    60 for as long as the game holds it, and drops to 30 when it can't, or at once at "critical", the
    last step before the system starts shutting things down. At 30 it tries 60 again after a few
    minutes, even while the device is still warm, instead of waiting for it to cool all the way down,
    which can take half an hour on a phone; a try that doesn't hold waits longer before the next.
    Frame Rate's default is still 60.

Fixed

  • The rear-view mirror and the reflections on the car (#89): their picture had stair-stepped
    edges at every setting, because SpeedBreaker drew the car's surroundings with one sample a pixel
    where the game asks for four. Now they get four (drawn at twice the size each way and averaged),
    so the mirror's edges and lamp posts are smooth, close to the Xbox 360's. It costs about 0.4 ms of
    GPU time a frame in a race on a Steam Deck, and nothing measurable on an M1 Pro Mac; on Intel UHD
    Graphics 620 about 2 ms (1.6 fps).
  • Shadow Resolution above 1x: the game checked the whole shadow map for changes at every draw that
    uses it, and now checks again only after new data is written. On a Steam Deck, measured with the
    3600x1600 map, that takes about 1 ms a frame off the render thread, and the busiest city stretch
    we test runs at about 57 fps instead of 52. 1.5x and 2x went through the same check, so if you
    chose one of them yourself, it runs lighter too.
  • iPhone, iPad, Mac, Steam Deck and Steam Machine: the game spends less of the CPU waiting, with the
    same picture and frame rate (#71). Threads that wait for the GPU, for new work or for their next
    turn now check less often and go to sleep sooner, and one late wake-up no longer makes a thread
    spin for a whole second. In a race on an iPhone 18 Pro Max that's 6 to 16 % less CPU and 9 to 21 %
    less CPU energy (13 to 42 % less in the menus), and on an M1 Pro Mac 4 to 12 % less CPU power, at
    the same 60 fps. On a Steam Deck only the wait for new work and the late wake-up fix are on,
    because the other two cost frames in the busiest scenes there: about 8 % less CPU in a race and
    13 % less in the menus, also at 60 fps. On a Steam Machine all but the wait for the GPU are on,
    because that one costs frames in the busiest scenes there: about 12 to 14 % less CPU in a race and 9 to
    15 % less in the menus, also at 60 fps.
  • When the graphics driver stops answering and the system resets the GPU (reported with Intel
    graphics on Windows: #57, #99 and #101), the game now closes within a few seconds and writes a
    crash report. Before, it could also freeze for good, with no report. The resets themselves aren't
    fixed yet; the report now says more about where they happen.
  • Sharper UI: where its last pass has nothing to do (the picture isn't enlarged, or is enlarged by a
    whole number, as at a Mac's default), the game no longer prepares that pass every frame. On an M1
    Pro Mac that's about 0.2 to 0.45 ms less GPU time a frame, with the same picture.
  • On an iPhone, at 16:9 and on ultrawide screens, the menus' graffiti tags now start at the top edge
    of the screen, as they do on a 16:10 Mac since v0.2.3 (#87).

How to update

  • Mac: drag the new SpeedBreaker into Applications and choose Replace, then allow it once more with Open Anyway (System Settings > Privacy & Security).
  • Steam Deck, Steam Machine, Steam Frame and Linux: unpack the new download over the old folder (~/Games/SpeedBreaker). Your Steam shortcut keeps working.
  • Everywhere: your saves, settings and the installed game are kept, and no disc image is needed.

More about it

  • NFSMW_CUBE_AA=off draws the mirror's surroundings the old way, for comparing.
  • With a German or Spanish PAL disc, saves are in save-pal-de or save-pal-es instead of save,
    and that's where a save to bring in goes.
  • NFSMW_EFFICIENCY=0 makes the game wait the v0.2.5 way, and NFSMW_AUTO_FPS=classic gives Frame
    Rate's Auto its v0.2.5 rules, for comparing. NFSMW_CPU_LOG=<seconds> (iPhone, iPad, Mac, Linux
    and the Steam Deck) adds a line to the log with each thread's CPU use, and on iPhone, iPad and Mac
    the CPU energy.
  • NFSMW_GPU_MARKERS=1 (or 2, for every draw) marks the GPU's progress through each frame, so the
    crash report after a reset says which part of the picture it had finished and which it was
    drawing. It's off by default: on Intel graphics it costs about 0.5 to 1.5 ms of GPU time a frame. On
    Windows, the log also lists the GPU resets Windows recorded in the last 14 days.
  • NFSMW_UI_MASK_LAZY=0 prepares Sharper UI's last pass every frame, as v0.2.5 did.

The full list of changes is in CHANGELOG.md.

Which file is for my device?

Device Download Setup
Steam Deck, Steam Machine and Linux PCs (x86-64) SpeedBreaker-steamos-x86_64.tar.xz Steam Deck and Steam Machine, Linux
Steam Frame (arm64) SpeedBreaker-steamos-arm64.tar.xz Steam Frame
Mac with Apple silicon, macOS 15 or later SpeedBreaker-macos.dmg Mac
iPhone and iPad (experimental) SpeedBreaker-0.2.6-ios.ipa, or build it yourself with Xcode iPhone and iPad
Windows (beta) SpeedBreaker-0.2.6-windows-x64-beta.zip, on its own v0.2.6 Windows beta pre-release page Windows (beta)
Android Coming soon

The two SteamOS files are not interchangeable: the arm64 one is for the Steam Frame only, and the
x86-64 one doesn't run on the Frame. Each download has a .sha256 file next to it (see Checksums
below).

All downloads are built from this release's source, commit 75d944b. The first line of the
game's log, and Settings > Advanced, say SpeedBreaker v0.2.6 (75d944b).

The Source code archives that GitHub adds hold SpeedBreaker's own source, with no game code or
data. Building from them needs your own disc; see
Building from source.

iPhone and iPad: the experimental IPA

SpeedBreaker-0.2.6-ios.ipa is signed by nobody: a sideloading tool such as AltStore signs it
with your own Apple Account and installs it. The IPA file itself hasn't been installed on a
device yet
: an earlier build of this version's IPA, re-signed with a development signature, ran on
an iPhone 18 Pro Max. Please report how it goes, working or not, with your device and tool.

  • The game asks iOS for more memory than most apps (two entitlements: Extended Virtual Addressing
    and Increased Memory Limit). A free Apple Account can give at most the second, and only with
    some tools: AltStore Classic 2.2 or later is expected to keep it; SideStore 0.7 drops both.
    Without them the game may not start, or iOS may close it in busy scenes. When iOS refuses the
    memory, the game says so on screen instead of closing.
  • A free Apple Account's apps stop opening after 7 days until the tool refreshes them, and at most
    3 sideloaded apps can be active at once. These are Apple's limits.
  • iOS or iPadOS 17 or later, on an A15-class chip or newer, with a controller or keyboard.
  • Coming from a build you made yourself, the IPA installs as a separate app: install the game again
    from your disc image. Saves made in the old app stay with it.
  • Sideloading the IPA
    has the steps and which tools keep what. Building it yourself with Xcode still works as before.

How these downloads were tested

The files attached here are built from 75d944b. That build was made after testing, for a change to two comments in
the source. Each program in it was compared byte for byte with the one tested just before it: only the commit name,
the build date and time and the build's own ids differ (the IPA has one more difference, below). Its unit tests were
run, and each download but the IPA raced once.

The tests below were run on the two builds before it: the first one, and one with a fix for a slowdown that testing
found on the Steam Machine (the fix only changes where one piece of the game's data sits in memory). The Steam Machine
ran all of its tests again on the fixed build. The other devices ran shorter checks on it: the build, the unit tests,
a race, and speed and picture against the first build. On the Steam Machine, the Steam Frame and the Mac, each
download was unpacked or opened as the setup steps say, with a fresh home folder, and the game was installed through
the installer from a disc image. On Windows the runs used the zip's own SpeedBreaker.exe and a game installed before:

  • x86-64: on a Steam Machine, with the fixed build: races at 60 fps, also in two-player split screen and with Cops
    on in a Quick Race. At 3440x1440 and Internal Resolution 3x, in the same session as v0.2.5, the busiest city stretch
    ran at 59.66 fps with no dropped frames (v0.2.5: 59.73, none). The first build had dropped 9 or 10 frames a run there:
    that is what the fix is for. The pause menu over a race held 60 fps, as in v0.2.5. Smooth Motion on a simulated
    120 Hz display showed its in-between pictures through the race in 2 of 3 runs, as v0.2.5 did beside it (in the
    third, each fell back to 60 for about 4 seconds at the start), and 90 pictures a second on a 90 Hz one.
  • arm64: on a Steam Frame, outside the headset: the installer, races at 60 fps at 1280x720 on both builds, Spanish
    menus, two-player split screen, Quit Game and SIGTERM worked. At 1920x1080 (Internal Resolution Auto, 2x) a race ran
    at 38.44 fps, against 37.42 for v0.2.5 in the same session.
  • Mac: on a MacBook Pro (M1 Pro): the installer and a race worked, and the PAL Spanish disc installed and played in
    Spanish. At 4K and Internal Resolution Auto (2x) it held 60 fps in every run, as v0.2.5 did, with 1.10 to 1.30 ms less
    GPU time a frame on the same stretch of a race. The attached download itself ran that check again, and the "not
    worse" check below, against the first build: the same results. The macOS 15 virtual machine check wasn't repeated for
    this version.
  • Windows (beta): on a laptop with Intel UHD Graphics: 48 race loads with no hang or crash, 16 of them with pause
    and resume. The smoother mirror costs about 1.6 fps in a race there (28.43 against 30.07 fps in beta 8); with
    NFSMW_CUBE_AA=off it ran as beta 8 did (30.22), and the menus ran as in beta 8. One of the 99 unit tests fails,
    because the test itself expects / where Windows writes \; the save import it checks worked in the game. The
    installer wasn't run this time.
  • Updating from v0.2.5: the two SteamOS downloads and the Mac one, installed over the published v0.2.5, kept the
    installed game and showed What's new for v0.2.6, read to its end. The Mac kept a changed setting, and the Steam Frame
    found the save v0.2.5 had made. The Windows beta, started with the settings beta 8 left, showed it too.
  • The update check: against a local test server, not GitHub: it said "up to date", and for a newer test version it
    showed the notice, the update button in Settings and the download page with its QR code. On Windows, beta 9 offered a
    newer test beta the same way. Every other run had the check off.
  • The changes:
    • Bringing in a save: on the Steam Machine, the Steam Frame, the Mac and Windows, a save the game had just made, put
      in the save folder under another name, came in at the next start and loaded. It moved to imported, and
      import-log.txt named it. A second copy was refused, and the save already there stayed byte for byte the same. On
      the Mac and on an iPhone (below), a player's save from the Xenia emulator (#105) came in and its career resumed. A
      save package from a real Xbox 360 hasn't been tried.
    • At 2560x1440 the Mac showed Shadow Resolution "Auto (3600x1600)". The Steam Machine kept "Auto (3200x3200)" and the
      Steam Frame "Auto (1600x1600)".
    • The mirror and the car's reflections were smooth by default on every device, and had v0.2.5's stair steps with
      NFSMW_CUBE_AA=off. With it off, the race and pause pictures matched v0.2.5's on the Steam Machine and beta 8's on
      Windows, within run-to-run noise. The new mirror cost the Steam Machine 0.1 to 0.2 ms of GPU time a frame at
      3440x1440 and the Steam Frame 0.2 ms at 1280x720, with no frame lost, and nothing measurable on the Mac at 4K.
    • The waiting changes were on as described: all four on the Mac and the iPhone, all but the wait for the GPU on the
      Steam Machine, none on the Steam Frame and Windows. NFSMW_EFFICIENCY=0 turned them off. On the Steam Machine at
      3440x1440 the fixed build used 14.0 % less CPU than v0.2.5 in a race and 12.7 % less in the menus, at the same frame
      rate, and its render thread took as long a draw as v0.2.5's in a race (3.27 against 3.255 microseconds; the first
      build took 3.65). A simulated Steam Deck got the Deck's two; the Deck itself was measured earlier with a test build,
      not with these downloads.
    • On the Mac, with the system's "serious" heat simulated, Frame Rate Auto kept 60 fps, and NFSMW_AUTO_FPS=classic
      dropped to 30. The iPhone stayed cool on its charger, so the new rules never had to act there.
    • On Windows, without causing a GPU reset, the log and a saved bug report listed the one reset Windows had recorded
      on that laptop in the last 14 days. NFSMW_GPU_MARKERS=1 added its line, and cost 0.5 to 0.7 ms of GPU time a frame
      in a race.
    • The Mac's "not worse" check measures speed, CPU, power and memory in four scenes, at the Mac's own settings and at
      matched ones. Against v0.2.5, at its own settings nothing was worse and every figure that moved was better: a drive
      held 60 fps where v0.2.5 held 58.1. At 1920x1080 and Internal Resolution 1x two GPU figures read worse, in runs
      where the GPU had picked a higher clock; checked again with the mirror drawn the old way, nothing read worse.
      Against the first build, the fixed build and the attached download read the same on all 88 figures.
  • iPhone and iPad: the IPA file was checked for its contents and signing layout, as before; it hasn't been
    installed on a device from this file. Compared with the build before it, its program also reads one system function
    from the other of two identical slots. The first build's IPA, re-signed with a development signature (only the
    signature and the app's id changed, checked byte for byte), ran on an iPhone 18 Pro Max: a race at 60 fps at its
    default settings, the Options menu, and #105's Xenia save, put where the Files app shows the game's files (On My
    iPhone > SpeedBreaker), came in and its career resumed. That IPA didn't have the Steam Machine fix.

Checksums (SHA-256)

File For Size SHA-256
SpeedBreaker-steamos-x86_64.tar.xz Steam Deck, Steam Machine, Linux PCs 19.8 MB 7187a39344bda8e3d4a13a0b90200b654e2ea607602c072f6c9b35b9efbff823
SpeedBreaker-steamos-arm64.tar.xz Steam Frame 16.8 MB 5cc6bbd4315cd5547cf98b1e1e52e312f4493ad438496014c1f0800531d1ada6
SpeedBreaker-macos.dmg Mac (Apple silicon, macOS 15 or later) 32.2 MB 3c204910ab0d3780aa52eae1ab81b4d358e0c2fdde546db0a5c48f8c0eab60f7
SpeedBreaker-0.2.6-ios.ipa iPhone and iPad (experimental, to sideload) 27.6 MB d05bcade84bbb0f8fc190127423dbd9f5b042527ed348b33cdb0cb74e5306dea
SpeedBreaker-0.2.6-third-party-source.tar.xz Source of the LGPL and GPL libraries in the downloads 213.6 MB cb8aee2ad9d93e41b486d2fef89bcfca77ca09909751e2c4205507b75c660e42

Each file has its .sha256 next to it on this page. Download both into the same folder, then
run sha256sum -c SpeedBreaker-steamos-x86_64.tar.xz.sha256 on SteamOS or Linux, or
shasum -a 256 -c SpeedBreaker-macos.dmg.sha256 on a Mac (with your file's name). It should
say OK.

Known issues and limits

  • Mac, the first time you open it: the app isn't notarized by Apple, so macOS refuses to
    open it and offers Done or Move to Trash. Click Done. Then go to System Settings >
    Privacy & Security, scroll down to the message that SpeedBreaker was blocked, click Open
    Anyway
    , and confirm with Open Anyway and your password (or Touch ID). After that it opens
    normally.
    • The Open Anyway button only stays there for about an hour after the refusal. If it's gone,
      open the app again.
    • You do this once per download, so once more after each update. Control-click > Open no
      longer skips it.
    • The app isn't damaged. If macOS ever says it is, check the download against its .sha256 and
      download it again.
    • Apple silicon only, macOS 15 or later.
  • macOS 15 Sequoia was tested in a virtual machine with an earlier version, not with v0.2.6, and
    not yet on a real Mac. If you play on
    macOS 15, a short report in the issues, working or not, with your Mac's model, would help a lot.
  • Intel Macs build from source only and are community-tested: we have no Intel Mac to test
    on, and Intel graphics haven't been tried (the README's Building from source has the steps).
  • Mac frame pacing was measured on a MacBook Pro (M1 Pro) with its 120 Hz ProMotion screen, in
    fullscreen. Other 120 Hz screens (other Macs, external displays) and windowed play weren't
    measured; a frame that isn't ready in time is shown when it is, as before.
  • A Brightness slider moved before v0.1.4: if you moved the game's own slider in an earlier
    version (where it did nothing) and the game has saved since, v0.1.4 and later use that setting
    from the main menu on. At maximum the picture is much brighter and washed out, as on a 360 with that save.
    In the pause menu > Options > Video, set the slider back to the middle, or press Y (Defaults) and
    choose Yes. Settings > Display > Brightness doesn't undo it.
  • Steam Deck OLED: set the refresh rate to 60 Hz (Quick Access > Performance); with Steam's
    per-game profile on, it stays at 60 Hz for this game. At 90 Hz the game stutters, and a note says
    so once. Leave the Framerate Limit off. The Steam Deck LCD hasn't been tested yet.
  • 120, 180 and 240 Hz screens were tested on simulated displays, not yet on a real panel, and
    not in Game Mode on a TV. 90, 144 and 165 Hz can't show 60 fps evenly: use 60 or 120 Hz, or
    variable refresh (or, on a SteamOS or Linux PC at 90 Hz, Smooth Motion).
  • Game Mode on Steam Deck and Steam Machine:
    • Browse for image... may not open in Game Mode. Use the image the installer found instead:
      it is highlighted, so press A, then A again on Install. If it found more than one
      (for example one in Downloads and one on the SD card), pick yours with Up and Down first.
    • Choose a folder... opens its folder picker only in Desktop Mode. Pick the folder there, or
      run ~/Games/SpeedBreaker/speedbreaker.sh --install <image> --dest <folder> from Konsole. Use
      a folder on the internal storage or on a card formatted by SteamOS, or Game Mode won't find
      the game.
    • Game Mode only sees SD cards and USB drives formatted by SteamOS. For others, copy the image
      into Downloads from Desktop Mode.
    • Docked, or on a Steam Machine, set the shortcut's Game Resolution to Native.
  • Steam Frame: it plays as a big flat screen in the headset; it is not a VR mode. Set Display >
    Frame Rate to 30 fps for smooth play (the headset's compositor shares the graphics chip; the
    game keeps its full speed). The Frame's file manager can't unpack the download: use the Konsole
    command in the setup steps. Since v0.1.2 the game needs a current SteamOS on the Frame (September
    2026 or later): if it says GLIBCXX_3.4.34 not found, update SteamOS.
  • Linux:
    • Always start it with speedbreaker.sh. Started on its own, the program in lib/ fails on
      most systems with a message such as GLIBC_2.44 not found.
    • The x86-64 download is tested here on SteamOS. Players reported v0.1.1 working on Fedora 44
      with a GeForce GTX 1080 Ti and on Ubuntu 24.04 with Intel Arc graphics (issue #2).
      The dedicated-GPU choice on two-GPU laptops hasn't been tried on a real laptop here yet: a
      note with your laptop's [video] Vulkan devices: log line would help.
    • Choose a folder... needs a file chooser portal or zenity; without one, install with
      --dest.
    • It needs a CPU with AVX2 (Intel Haswell, AMD Excavator or Zen, or newer) and Vulkan 1.2
      graphics.
  • iPhone and iPad: the IPA is experimental and hasn't been installed on a device from the file
    itself yet (see above). On the iPhone 18 Pro Max, long sessions on a charger get it hot even at 1x.
    Frame Rate Auto now keeps 60 there for as long as the game holds it, and drops to 30 when it
    can't.
  • Going back to v0.1.4 works, but if you change a setting there, it forgets the keys set on
    the Controls page: back in v0.1.5 or later they are the defaults again.
  • Game versions: the USA (NTSC-U) and the European (PAL) Spanish Xbox 360 discs are supported.
    The German (PAL) disc plays only in a build from source with its code, and Cops in Quick Race is
    untested on it. Other PAL discs, Japanese discs, re-releases, Games on Demand packages and the PC
    version aren't supported, and no title update is used.
  • Languages: the menus and the race text come from the disc's own files in ten languages. The
    movies and the speech (the police radio, the voices in the scenes) stay in the disc's language:
    English on the USA disc, Spanish on the PAL one. Fan translations aren't supported.
  • Mac: wired Xbox controllers don't rumble. macOS drives an Xbox One or Series controller
    connected by USB through its own controller framework, which never runs the motors. Pair it
    over Bluetooth for rumble (a DualSense rumbles either way).
  • Steering wheels are experimental. The Logitech G29 is the one tested, on a Mac. The steering
    feel is still being tuned (in sharp turns it can feel too quick), and wheel and split screen
    together haven't been tried. Force feedback isn't tested on SteamOS or Linux, and doesn't work
    with a G29 in its PS4 position, a G920 or a G923. If you have a wheel, a report with your
    wheel's model, working or not, would help a lot.
  • Split screen needs two controllers, and renders at most Auto's internal resolution. On a
    Steam Deck it holds 60 fps at Internal Resolution Auto (1x).
  • HDR on SteamOS, Linux and Windows was checked in its settings and logs, not yet on a real HDR
    screen there; on a Mac it was checked on an HDR display. A report from an HDR TV or monitor would
    help.
  • Smooth Motion is on Macs with a 120 Hz screen (measured on a MacBook Pro (M1 Pro) and a Mac
    Studio (M4 Max)) and on SteamOS and Linux PCs at 120 or 90 Hz (measured on a Steam Machine). Not on
    the Steam Deck, Windows, iPhone or iPad.
  • Bringing in a save: it was tested with saves SpeedBreaker made, also packed the way an
    Xbox 360 packs them, and with a player's save from the Xenia emulator (#105). A save package
    copied off a real Xbox 360 hasn't been tried yet: if yours doesn't come in, a report with its
    import-log.txt would help.
  • Not in this release: controller button remapping, mouse control in the game,
    more than 60 fps outside Smooth Motion (the game's own cap), and Android builds. Windows is in beta.

Reporting a bug

  1. Open the settings (F1; Back + Start on a controller; on a Steam Deck hold View and press Menu;
    on a Steam Frame press Menu + View; a three-finger tap on iPhone and iPad), go to
    Advanced and choose Save Bug Report.
  2. A notice says where the zip file went: usually your Desktop (on SteamOS, pick it up in Desktop
    Mode, or in the Desktop app on a Steam Frame), or the SpeedBreaker folder in the Files app on
    iPhone and iPad. Its name says which version you're running, for example
    speedbreaker-bug-report-v0.2.6-<date>_<time>.zip. Nothing is uploaded.
  3. Check the open issues first. Then
    open a new issue, attach the zip, and say which device and download you use, what you were
    doing, what you expected, what happened, and roughly how long into the session it happened.
    If the game crashed, start it again and save a report: the crash report is included.

Never attach game files or disc images to an issue.
CONTRIBUTING.md
says how bug reports and pull requests are handled.

Thanks

To ferarucatalin124 and ashdask for the save reports, and to ashdask for the save that showed
the Xenia layout (#83, #105); to dregomz for the mirror report and TorutheRedFox for pointing at its
missing samples (#89); to deus-ex-machine, krittinen and TorutheRedFox for the shadow reports behind
the wider map (#90); to Simonxdd for pointing at the busy waits (#71); to Astrax2005, AhmadAbd9843
and swifty-tekno for the reports and test runs behind the GPU reset report (#57, #99, #101); and to
everyone who reports how the game runs on their devices.

License and legal

SpeedBreaker is free software under the GNU General Public License, version 3 or (at your
option) any later version (GPL-3.0-or-later). Each download carries its license notices and every
bundled library's own license (licenses/ in the SteamOS downloads,
SpeedBreaker.app/Contents/Resources/licenses in the Mac app, SpeedBreaker.app/licenses in the
IPA).

The complete source of the LGPL and GPL code by others in these downloads (FFmpeg with
SpeedBreaker's patch and libmspack in all of them; the GNU C Library and GCC's runtime libraries in
the x86-64 one) is attached below as SpeedBreaker-0.2.6-third-party-source.tar.xz.

"Need for Speed" and "Most Wanted" are trademarks of Electronic Arts Inc. Steam, Steam Deck, Steam
Machine, Steam Frame and SteamOS are trademarks of Valve Corporation. iPhone, iPad and macOS are
trademarks of Apple Inc. All other trademarks belong to their respective owners. SpeedBreaker is a
fan project by project(u), not affiliated with, endorsed by or sponsored by Electronic Arts Inc.,
the Need for Speed brand, Valve Corporation or Apple Inc. It contains no game data or assets, and
is provided "as is", without warranty of any kind. No game files are included: you need a
backup of your own USA (NTSC-U) or European (PAL) Spanish Xbox 360 disc.