Failure to connect to camera? #5
Description
Hello.
Not sure if this is the best place to ask but suddenly cannot connect to camera. It is on the network with a fixed IP address and plugged into a brand new Netgear POE switch.
Any thoughts?
>ipconfig_cmd.exe list
[2024-04-02 18:40:19.219] [error] [win32_named_pipes_thread.h:106] Failed to open pipe. system:2
[2024-04-02 18:40:19.219] [error] [rpc_client.cpp:300] Failed to connect to NamedPipe-server at id=ic4-gentl-gev_service_pipe_1.0.0.554. Error: system:2
Failed to connect to service, ec: 'system:2'
R:\apps\tis\gige\bin>ping 192.168.68.49
Pinging 192.168.68.49 with 32 bytes of data:
Reply from 192.168.68.49: bytes=32 time<1ms TTL=255
Reply from 192.168.68.49: bytes=32 time<1ms TTL=255
Reply from 192.168.68.49: bytes=32 time<1ms TTL=255
Reply from 192.168.68.49: bytes=32 time<1ms TTL=255
Ping statistics for 192.168.68.49:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
The IC4 Service appears to be running:
