Repository navigation
Releases
Releases · TodesengelX/reolink-native-linux
v0.2.1
Fixed
- Jumping around in HD playback is near-instant. Clicking elsewhere on the
timeline kept playing the old spot for several seconds while the red bar
ran on ahead, because video the NVR had already sent was played out first.
The new spot now starts in about a third of a second, and the red bar waits
for it. After a jump, HD playback also no longer freezes and reconnects when
the NVR moves on to its next recording file. - The network scan takes a couple of seconds again instead of about 40.
Since 0.2.0 it sent a slow HTTPS probe to every address on the subnet
rather than first checking for the port every Reolink device listens on,
and it also scanned container and VM networks such as Docker's. - Playback no longer draws "Click a recording on the timeline to play" over a
paused or stopped picture, and switching camera or day no longer leaves the
previous picture on screen. The 4-camera panes show their picture from the
first frame instead of after a few seconds of black. - The time readout on the playback timeline no longer covers the detection
markers you're pointing at: it now sits in the hour-label row under the
recordings. While you drag the playhead it follows along and shows where
you are, instead of staying where the drag started.
(#38)
Full Changelog: v0.2.0...v0.2.1
v0.2.0
A large release: twenty-four community pull requests, a full PTZ panel, and
audio. Thanks to everyone who sent code: gsoros, thelabcorner, iibaranov-IG,
atripathy86, aalap, greenfanDev, MathiasDeWeerdt and 815rx1.
Added
- PTZ panel. Open it from a PTZ camera's toolbar (⇅). Everything in it is
read back from the camera and shown only when the camera supports it.- Pad or joystick. A round eight-way pad (hold to move) or a joystick
where a small push moves slowly and a full push moves at the chosen
maximum. Switch between them in the pad's corner; the choice and the
speed are remembered. - 3D positioning, like the phone app: click the video to centre that
spot, drag a box to zoom into it, double-click to zoom in, scroll to zoom.
Works through an NVR. - Zoom and focus sliders with the lens's real position, hold-to-move
buttons, and an Auto focus button. - Presets as picture cards: save the current view with a snapshot, go
to one, delete one. - Patrol start/stop; Home position: return to it, set it to the
current view, and choose whether (and after how long) the camera returns
there when idle; AI auto-tracking: on/off, which targets to follow,
and how soon to return home once the target stops. - Keyboard on a maximized PTZ camera: arrows pan and tilt,
+/−zoom,
[/]focus,Escleaves 3D mode.
- Pad or joystick. A round eight-way pad (hold to move) or a joystick
- Audio. Live audio with a speaker toggle on each pane (#20), and
recorded audio in playback, over Baichuan too (#24). By greenfanDev. - Baichuan-only cameras (no HTTP or RTSP, such as some Lumus and E1
models) can be discovered, added and watched live over TCP 9000 (#6).
By gsoros, who also made recorded playback on such firmware work. - Spotlight and floodlight control, shown only on cameras that really have
a light, with brightness in Device Settings → Light (#10). By thelabcorner. - 12-pane live layout (#13), and the chosen layout is remembered
(#12). By atripathy86. - Event inbox tidying: repeated events from one camera merge into one,
plain motion events can be hidden, and events older than 7 days are
deleted (#26). A setting turns off event pop-ups (#21). Events show
their real time instead of "just now" (#29), and opening one plays it in
your chosen quality or shows its snapshot when nothing was recorded (#28).
By greenfanDev. - Opening an event zooms the playback timeline to a 5-minute window with the
event's marker centred; the time ticks follow the zoom level. - Timeline clicks snap to a nearby recording instead of landing in a gap
(#25). By greenfanDev. - The sidebar shows each device's IP address (#19). By greenfanDev.
- Add all discovered devices at once with one set of credentials (#36).
By 815rx1. - SD/HD is remembered per camera (#35). By 815rx1.
- German translation; the app follows the system language (#34).
By 815rx1.
Changed
- Full screen can be left without a keyboard (#37): touching the screen or
moving the pointer shows an Exit full screen button in the corner for a
few seconds. Made for wall-mounted touchscreens, where Esc and F11 don't exist. - The Add Device scan now says when no device answered, and explains that
battery cameras (the Argus series) can't be added on their own yet; paired
with a Reolink Home Hub, they can be added through the hub (#9). - Flatpak: streams decode on every system. It now bundles its own LGPL
FFmpeg 7.1.5 (with VA-API) on the KDE 6.11 runtime instead of relying on
Cisco's separately downloaded openh264, whose absence left every stream
blank (#5). The error now names the decoder that failed (from #32, by
815rx1). - Video stops streaming while the window is hidden in the tray, and resumes
when it's shown (#23). By greenfanDev. - A live pane's SD stream switches to Baichuan only when the camera's RTSP is
actually turned off (#35), not after any temporary RTSP error.
Fixed
- Detection markers were missing from the playback timeline on most days
(#31). They only came from the app's own inbox, which keeps the last 100
events and only sees what happens while the app runs. The timeline now reads
each day's detections from the device itself, as the official apps do, and
shows each one as a coloured bar for its length: person, vehicle, animal or
motion (and other types when there are any). Chips under the timeline show
the day's count of each kind and switch it on or off; the choice is
remembered. - In the 4-camera playback view, the per-camera lanes under the timeline were
cut off. They show again, each with its own camera's detection markers. - A standalone camera listed above an NVR could have the NVR's header drawn
over its row (#7, fixed by #16 from greenfanDev), and a standalone
camera could stay classified as an NVR (#8, by iibaranov-IG). - Live streams stayed stopped after a reconnect, and a stalled decoder wasn't
recovered (#14). By atripathy86 and aalap. - The Baichuan connection spun at 100% CPU after a device dropped off
(#15). By greenfanDev. - Older firmware with 1024-bit TLS keys couldn't be added (#17). By
greenfanDev. - The Add Device scan list left out some discovered devices (#18).
By greenfanDev. - Streams now send RTSP TEARDOWN when they stop, and the app quits cleanly
(#22). By greenfanDev. - The sidebar keeps its intended width when the window is maximized or the
layout is tight. Camera rows now grow with the system font instead of
overlapping (#30, by MathiasDeWeerdt). - Playback on a standalone camera falls back to the native Baichuan sub
stream when the camera's HTTPS/flvendpoint is unavailable, instead of
retrying FLV forever on "Connecting…" (#30, by MathiasDeWeerdt). - A device that refuses a Baichuan stream request no longer leaves the player
on "Connecting" forever; the player reports the error and falls back. - Event cleanup only ever deletes thumbnails inside the app's own thumbnails
folder, even when the database came from another install.
What's Changed
- Add Baichuan-only camera support by @gsoros in #6
- Fix sticky NVR classification for standalone cameras by @iibaranov-IG in #8
- feat: add capability-driven light control for Spotlight and Floodlight by @thelabcorner in #10
- Persist live view pane preset by @atripathy86 in #12
- Add 12-pane live view layout by @atripathy86 in #13
- Fix live streams staying stopped after reconnect by @atripathy86 in #14
- Stop the Baichuan pump spinning at 100% CPU when the device drops by @greenfanDev in #15
- Fix standalone cameras drawing an NVR header over their sidebar row by @greenfanDev in #16
- Accept 1024-bit TLS keys from older Reolink firmware by @greenfanDev in #17
- Show every discovered device in the Add Device scan list by @greenfanDev in #18
- Show each device's IP address in the sidebar by @greenfanDev in #19
- Add live audio playback with a per-pane speaker toggle by @greenfanDev in #20
- Add a setting to turn off event pop-ups by @greenfanDev in #21
- Send RTSP TEARDOWN when a stream stops, and quit cleanly by @greenfanDev in https://github.com/TodesengelX/reolink-native-linux/pu...
v0.1.8
Fixed
- Playback failed with a black screen that retried forever on systems with
FFmpeg 8 or newer. Reolink devices serve HTTPS with a self-signed
certificate, which the app has always accepted; FFmpeg 8.0 changed its
default to reject it. Live view was unaffected because it uses RTSP. This
only ever hit builds from source (Arch and other current distros) — the
AppImage and Flatpak bundle an older FFmpeg — but it would have reached
those too as their base images move forward. - Playback stopped dead at every event marker. The NVR streams one
recording file per connection and stores motion events as separate files, so
continuous footage ended exactly where an event began. Playback now
continues across recording boundaries automatically. - Removing a device and adding it back left its header stuck on the first
camera's name and "connecting…" forever, and a re-add could briefly show
"undefined" in place of the camera count.
Changed
- Clicking an event now starts playback 5 seconds before the moment, so the
approach is visible rather than only the aftermath.
Internal
- Continuous integration: every push and pull request now builds and runs the
test suite, including a second build against the newest Qt and FFmpeg so
upstream changes surface before they reach anyone building from source. - New regression test covering the TLS behaviour above.
Full Changelog: v0.1.7...v0.1.8
v0.1.7
Added
- Per-camera view rotation: right-click a camera in the sidebar →
Rotate view 90° turns its picture in 90° steps, persisted per camera
and applied in live view and both playback modes — for devices whose
firmware misreports orientation. (#3)
Fixed
- HD live view failed ("Could not find codec parameters") on cameras whose
newer firmware doesn't report the main-stream codec the way the app
expected — it assumed H.264 and choked on H.265 streams. The codec report
is now normalized across firmware spellings, and when it's genuinely
unknown the stream is probed instead of assumed. (#4) - Cameras attached through a Home Hub could show rotated 90° because the hub
declares their resolution transposed while the stream arrives upright; the
auto-rotation heuristic now also requires the decoded frame to actually be
portrait before correcting. (#3)
Full Changelog: v0.1.6...v0.1.7
v0.1.6
Added
- Synced multi-camera playback: a 4-pane playback grid driven by one
calendar and one timeline, like the official client's split playback. The
timeline shows the union of every camera's recordings with a thin coverage
lane per camera, and one playhead drives all panes to the same wall-clock
moment; a camera with no footage there says so instead of looking broken. - Playback grid interactions: drag cameras in from the sidebar or between
panes (swaps, never drops), double-click to maximize a pane and again to
restore, digital zoom with drag-to-pan in every pane, and an SD/HD toggle
on the maximized pane that plays the full-resolution main stream with
in-place seeking. - Live view: drag cameras from the sidebar into any grid cell and drag panes
between cells to rearrange; the arrangement persists across restarts. - Sidebar recovery actions: right-click a device for Reconnect and
Update credentials… — fix a wrong password in place instead of
removing and re-adding the device.
Fixed
- A device that was unreachable when the app started stayed "connecting…"
forever; unreachable devices now retry automatically with backoff and
recover on their own. Sign-in failures are shown with the device's
attempts-left lockout warning and are deliberately never auto-retried. - Adding a device now checks it first: a wrong address or rejected password
is an inline message in the dialog instead of a phantom row. - Rearranging grids no longer reconnects running streams — panes carry their
streams with them, in live view and playback both. Restoring a maximized
view reconnects nothing. - Switching live-view layouts briefly holds hidden panes' streams so flipping
between presets (or maximize and back) is instant. - Concurrent commands to a device are now queued instead of racing, which
was the main source of the NVR web server's intermittent 502 errors.
Full Changelog: v0.1.5...v0.1.6
v0.1.5
Fixed
- Launching the app again raises the running window instead of starting a
second copy. Because closing the window leaves the app monitoring in the
tray, relaunching from the launcher is the normal way back in — but every
launch used to build a whole second client, with its own tray icon, NVR login
and decoder set. They accumulated over a day of use. - Hardware video decoding now works in the AppImage. The bundled
libva
could not load the host's VAAPI driver, so every stream silently fell back to
software decode. The host's ownlibvais now used, with the bundled copy
kept as a fallback so the app still starts on systems that have none.
v0.1.4
v0.1.3
v0.1.2
What's Changed
- AppImage: native Wayland (v0.1.2) by @TodesengelX in #2
Full Changelog: v0.1.1...v0.1.2
v0.1.1
What's Changed
- v0.1.1 — detection zones, 6-cam grid, notifications, nested tree, auto-update by @TodesengelX in #1
New Contributors
- @TodesengelX made their first contribution in #1
Full Changelog: v0.1.0...v0.1.1