Repository navigation
v0.2.0
A large release: twenty-four community pull requests, a full PTZ panel, and
audio. Thanks to everyone who sent code: gsoros, thelabcorner, iibaranov-IG,
atripathy86, aalap, greenfanDev, MathiasDeWeerdt and 815rx1.
Added
- PTZ panel. Open it from a PTZ camera's toolbar (⇅). Everything in it is
read back from the camera and shown only when the camera supports it.- Pad or joystick. A round eight-way pad (hold to move) or a joystick
where a small push moves slowly and a full push moves at the chosen
maximum. Switch between them in the pad's corner; the choice and the
speed are remembered. - 3D positioning, like the phone app: click the video to centre that
spot, drag a box to zoom into it, double-click to zoom in, scroll to zoom.
Works through an NVR. - Zoom and focus sliders with the lens's real position, hold-to-move
buttons, and an Auto focus button. - Presets as picture cards: save the current view with a snapshot, go
to one, delete one. - Patrol start/stop; Home position: return to it, set it to the
current view, and choose whether (and after how long) the camera returns
there when idle; AI auto-tracking: on/off, which targets to follow,
and how soon to return home once the target stops. - Keyboard on a maximized PTZ camera: arrows pan and tilt,
+/−zoom,
[/]focus,Escleaves 3D mode.
- Pad or joystick. A round eight-way pad (hold to move) or a joystick
- Audio. Live audio with a speaker toggle on each pane (#20), and
recorded audio in playback, over Baichuan too (#24). By greenfanDev. - Baichuan-only cameras (no HTTP or RTSP, such as some Lumus and E1
models) can be discovered, added and watched live over TCP 9000 (#6).
By gsoros, who also made recorded playback on such firmware work. - Spotlight and floodlight control, shown only on cameras that really have
a light, with brightness in Device Settings → Light (#10). By thelabcorner. - 12-pane live layout (#13), and the chosen layout is remembered
(#12). By atripathy86. - Event inbox tidying: repeated events from one camera merge into one,
plain motion events can be hidden, and events older than 7 days are
deleted (#26). A setting turns off event pop-ups (#21). Events show
their real time instead of "just now" (#29), and opening one plays it in
your chosen quality or shows its snapshot when nothing was recorded (#28).
By greenfanDev. - Opening an event zooms the playback timeline to a 5-minute window with the
event's marker centred; the time ticks follow the zoom level. - Timeline clicks snap to a nearby recording instead of landing in a gap
(#25). By greenfanDev. - The sidebar shows each device's IP address (#19). By greenfanDev.
- Add all discovered devices at once with one set of credentials (#36).
By 815rx1. - SD/HD is remembered per camera (#35). By 815rx1.
- German translation; the app follows the system language (#34).
By 815rx1.
Changed
- Full screen can be left without a keyboard (#37): touching the screen or
moving the pointer shows an Exit full screen button in the corner for a
few seconds. Made for wall-mounted touchscreens, where Esc and F11 don't exist. - The Add Device scan now says when no device answered, and explains that
battery cameras (the Argus series) can't be added on their own yet; paired
with a Reolink Home Hub, they can be added through the hub (#9). - Flatpak: streams decode on every system. It now bundles its own LGPL
FFmpeg 7.1.5 (with VA-API) on the KDE 6.11 runtime instead of relying on
Cisco's separately downloaded openh264, whose absence left every stream
blank (#5). The error now names the decoder that failed (from #32, by
815rx1). - Video stops streaming while the window is hidden in the tray, and resumes
when it's shown (#23). By greenfanDev. - A live pane's SD stream switches to Baichuan only when the camera's RTSP is
actually turned off (#35), not after any temporary RTSP error.
Fixed
- Detection markers were missing from the playback timeline on most days
(#31). They only came from the app's own inbox, which keeps the last 100
events and only sees what happens while the app runs. The timeline now reads
each day's detections from the device itself, as the official apps do, and
shows each one as a coloured bar for its length: person, vehicle, animal or
motion (and other types when there are any). Chips under the timeline show
the day's count of each kind and switch it on or off; the choice is
remembered. - In the 4-camera playback view, the per-camera lanes under the timeline were
cut off. They show again, each with its own camera's detection markers. - A standalone camera listed above an NVR could have the NVR's header drawn
over its row (#7, fixed by #16 from greenfanDev), and a standalone
camera could stay classified as an NVR (#8, by iibaranov-IG). - Live streams stayed stopped after a reconnect, and a stalled decoder wasn't
recovered (#14). By atripathy86 and aalap. - The Baichuan connection spun at 100% CPU after a device dropped off
(#15). By greenfanDev. - Older firmware with 1024-bit TLS keys couldn't be added (#17). By
greenfanDev. - The Add Device scan list left out some discovered devices (#18).
By greenfanDev. - Streams now send RTSP TEARDOWN when they stop, and the app quits cleanly
(#22). By greenfanDev. - The sidebar keeps its intended width when the window is maximized or the
layout is tight. Camera rows now grow with the system font instead of
overlapping (#30, by MathiasDeWeerdt). - Playback on a standalone camera falls back to the native Baichuan sub
stream when the camera's HTTPS/flvendpoint is unavailable, instead of
retrying FLV forever on "Connecting…" (#30, by MathiasDeWeerdt). - A device that refuses a Baichuan stream request no longer leaves the player
on "Connecting" forever; the player reports the error and falls back. - Event cleanup only ever deletes thumbnails inside the app's own thumbnails
folder, even when the database came from another install.
What's Changed
- Add Baichuan-only camera support by @gsoros in #6
- Fix sticky NVR classification for standalone cameras by @iibaranov-IG in #8
- feat: add capability-driven light control for Spotlight and Floodlight by @thelabcorner in #10
- Persist live view pane preset by @atripathy86 in #12
- Add 12-pane live view layout by @atripathy86 in #13
- Fix live streams staying stopped after reconnect by @atripathy86 in #14
- Stop the Baichuan pump spinning at 100% CPU when the device drops by @greenfanDev in #15
- Fix standalone cameras drawing an NVR header over their sidebar row by @greenfanDev in #16
- Accept 1024-bit TLS keys from older Reolink firmware by @greenfanDev in #17
- Show every discovered device in the Add Device scan list by @greenfanDev in #18
- Show each device's IP address in the sidebar by @greenfanDev in #19
- Add live audio playback with a per-pane speaker toggle by @greenfanDev in #20
- Add a setting to turn off event pop-ups by @greenfanDev in #21
- Send RTSP TEARDOWN when a stream stops, and quit cleanly by @greenfanDev in #22
- Stop streaming video while the window is hidden in the tray by @greenfanDev in #23
- Play recorded audio in Playback, and over Baichuan by @greenfanDev in #24
- Snap timeline clicks to nearby recordings by @greenfanDev in #25
- Add event inbox cleanup: merge repeats, hide motion, auto-delete by @greenfanDev in #26
- Auto-play event jumps in the chosen quality; show the snapshot when unrecorded by @greenfanDev in #28
- Show the actual time on events instead of "just now" by @greenfanDev in #29
- Fix sidebar layout and add HTTPS-FLV playback fallback by @MathiasDeWeerdt in #30
- Add German translation and load translations at startup by @815rx1 in #34
- Live view: remember SD/HD per camera; SD over Baichuan when RTSP is off by @815rx1 in #35
- Add dialog: add all discovered devices with one set of credentials by @815rx1 in #36
New Contributors
- @gsoros made their first contribution in #6
- @iibaranov-IG made their first contribution in #8
- @thelabcorner made their first contribution in #10
- @atripathy86 made their first contribution in #12
- @greenfanDev made their first contribution in #15
- @MathiasDeWeerdt made their first contribution in #30
- @815rx1 made their first contribution in #34
Full Changelog: v0.1.8...v0.2.0