Skip to content

v0.2.9

Latest

Choose a tag to compare

@github-actions github-actions released this 18 Nov 19:46

What's new

Battery camera motion

  • reostream now notices when a battery camera wakes for motion, with nothing to set up: it wakes the stream so the presence stream (and Frigate recording it) carries the motion live, and reports it on MQTT and as a Frigate event when [events] is set. Opening the camera in the Reolink app is not counted as motion. See "Motion" under Battery cameras in docs/setup.md.

Floodlight and siren for every camera

  • The floodlight and siren now work on cameras with no web API, battery ones included. The Live tab has the floodlight and a Siren button; over MQTT there's <prefix>/<camera>/light/set and <prefix>/<camera>/siren/set, and Home Assistant gets a Floodlight light, a Sound siren button and a Siren on detection switch.

Fixes

  • Live view through go2rtc could freeze or show broken frames in the browser, mostly at night or with the floodlight on. reostream's RTSP packed several small pieces of a frame into one packet, which go2rtc doesn't unpack. Each piece now goes in its own packet, as the camera's own RTSP does (#25, thanks vpshockwave for the capture).
  • A camera whose clock falls behind at night and then jumps ahead to catch up (seen on an RLC-823S2) left 5-6 second gaps in recordings. reostream now follows when frames actually arrive while the camera's clock is off, and goes back to the camera's clock once it keeps time again (#33, thanks bojangles9 for the analysis).
  • A battery camera with streams listed in its config stayed awake all the time. It now stays on demand whatever streams lists; only always_on keeps it awake. The RTSP message that suggested listing streams is corrected (#38).
  • Saving the config from the Config page on Windows could break the camera list, ending in "camera name is used more than once". The config is now saved with plain line endings, and a camera is never added twice (#34, thanks LeeViewP for finding the cause).
  • Home Assistant motion, person, vehicle and animal sensors start as off instead of "unknown".
  • A battery camera search could time a very quick answer as negative.

Docs

  • New on the tested list: CX810, RLC-522, RLC-820A, RLC-510WA, RLC-823S2, Elite Floodlight, Solar Floodlight Cam, plus two-way talk on the Video Doorbell Wi-Fi (v3.0.0.7106) and D340P. Thank you all!
  • Frigate: name the go2rtc stream like the Frigate camera (the Advanced Camera Card needs it), use the host's address when Frigate is on Docker's bridge network, and set Frame Rate Mode to Constant if a camera runs at half its frame rate.
  • A camera taken over by an NVR's auto-add can also be factory reset, and a battery camera bound to a Reolink cloud account needs a reset and local setup before it will add.

Update

docker pull ghcr.io/volttech21/reostream:latest, then recreate the container (your config is kept). On Unraid, if Check for Updates doesn't pick it up, use Force Update in the Docker tab's Advanced View.