WeatherXM · ipanagiv · Sep 11, 2024 · Aug 21, 2024 · Sep 11, 2024
@@ -157,7 +157,7 @@ In case you have trouble scanning the QR code, you can manually type the serial
 ### Confirm station installation Location & Claim your Device
 
 <div class="explanation small-big">
-  <img src={useBaseUrl("img/wxm-devices/d1/d1-location.png")} />
+  <img src={useBaseUrl("img/wxm-devices/d1/d1-location.jpg")} />
   <span>
 
 #### Select the Location that you'll Install your Station

@@ -67,7 +67,7 @@ if you experience connection issues while claiming a helium device,  make sure y
 :::
 
 <div class="explanation small-big">
-  <img src={useBaseUrl("img/wxm-devices/helium/device-type.svg")} />
+  <img src={useBaseUrl("img/wxm-devices/helium/device-type.jpg")} />
   <span>
 
 #### Reset your weather station and select device to pair
@@ -84,7 +84,7 @@ After that, push the "Pair station via bluetooth" button as seen in the picture
 ### Confirm station installation location
 
 <div class="explanation small-big">
-  <img src={useBaseUrl("img/wxm-devices/helium/confirm-location.svg")} />
+  <img src={useBaseUrl("img/wxm-devices/helium/confirm-location.jpg")} />
   <span>
 
 #### Select the Location that you'll Install your Station
@@ -110,7 +110,7 @@ Make sure you select the location that you will install your station as precisel
 ### Set weather station operation frequency
 
 <div class="explanation small-big">
-  <img src={useBaseUrl("img/wxm-devices/helium/select-freq.svg")} />
+  <img src={useBaseUrl("img/wxm-devices/helium/select-freq.jpg")} />
   <span>
 
 For the weather station to operate properly, you need to set its frequency to match the Helium network frequency in your country.

@@ -56,7 +56,7 @@ This incurs a "relocation penalty" (as mentioned in [the whitepaper](http://weat
 ### My station is not detected during scanning
 
 <div class="explanation small-big">
-  <img src={useBaseUrl("img/wxm-devices/helium/no-device-found.svg")} />
+  <img src={useBaseUrl("img/wxm-devices/helium/no-device-found.jpg")} />
   <span>
 
 Make sure the device has started.  Press the reset button at the bottom of the weather station. The light at the bottom of the station will flash a few times. the light at the bottom of the station will flash a few times indicating that the restart was successful. 
@@ -81,7 +81,7 @@ Close the application and start the process again. If the problem persists, pres
 ### The app cannot connect to the station after successfully pairing
 
 <div class="explanation small-big">
-  <img src={useBaseUrl("img/wxm-devices/helium/connection-failed.svg")} />
+  <img src={useBaseUrl("img/wxm-devices/helium/connection-failed.jpg")} />
   <span>
     If the claiming process is repeated more than twice without completion, attempt to unpair your weather station and start over. If you encounter connection problems during the claiming, make sure that you are near to the weather station at all times. The solution to the above is to visit the Bluetooth settings of the mobile phone, find the station in the paired devices and "forget the device". This flow is different on Android and iOS.
   </span>

@@ -38,7 +38,7 @@ Make sure you don't move away from your station as you might lose bluetooth conn
 ### Installing update
 
 <div class="explanation small-big">
-  <img src={useBaseUrl("img/wxm-devices/helium/installing-update.svg")} />
+  <img src={useBaseUrl("img/wxm-devices/helium/installing-update.jpg")} />
   <span>
 
 :::info
@@ -58,7 +58,7 @@ Make sure you don't move away from your station as you might lose bluetooth conn
 ### Successful firmware update
 
 <div class="explanation small-big">
-  <img src={useBaseUrl("img/wxm-devices/helium/station-updated.svg")} />
+  <img src={useBaseUrl("img/wxm-devices/helium/station-updated.jpg")} />
   <span>
 
 That's it! You've now claimed your new WeatherXM station and you'll be able to see its data on your WeatherXM app!

@@ -245,7 +245,7 @@ Follow the steps shown in the image below to find your WG1000 Gateway's Serial N
 ### Confirm station installation Location & Claim your Device
 
 <div class="explanation small-big">
-  <img src={useBaseUrl("img/wxm-devices/m5/installation-location.svg")} />
+  <img src={useBaseUrl("img/wxm-devices/m5/installation-location.jpg")} />
   <span>
 
 #### Select the Location that you'll Install your Station

@@ -119,7 +119,7 @@ In case you have trouble scanning the barcode, you can manually type the serial
 ### Enter your Claiming key
 
 <div class="explanation">
-    <img style={{width:"calc(100%*1/3 - 10px)"}} src={useBaseUrl("/img/wxm-devices/pulse/pulse-claiming-key.jpeg")} />
+    <img style={{width:"calc(100%*1/3 - 10px)"}} src={useBaseUrl("/img/wxm-devices/pulse/pulse-claiming-key.jpg")} />
     <div style={{width:"calc(100%*2/3 - 10px)"}} >
 
     #### Navigate to W3000 Gateway and reveal the claiming key