Skip to content

Releases

v0.4.0

Choose a tag to compare

@Zerojinny Zerojinny released this 02 Nov 05:47

DVT v0.4.0

DVT GUI

  • New page qBittorrent (seeder), at the top of the sidebar: downloads the newest stable qBittorrent (standard x64 build, SourceForge), unpacks the setup with 7-Zip into a temporary folder and copies only the program files to qbittorrent\ of the build folder (portable mode, qbittorrent\profile; nothing is installed in Windows). It then copies the ready-made settings file for the link speed of this PC (qbittorrent.ini.1G or .100) to profile\qBittorrent\config\qBittorrent.ini with the IP address and the network adapter of this PC (network interface, IP to bind to, tracker URL). Button "Update for this PC" sets these items again in the existing file. Data: data\qbt.ini.
  • Check image folder (qBittorrent page): checks the folder that becomes the torrent (folder name DL_NAME; required files backup.wim and dvt_check.txt; drivers\ and files\setpc.bat listed when present) and creates dvt_check.txt (about 4 KB of text) when it is missing.
  • Calculate disk size (qBittorrent page): reads backup.wim with wimlib-imagex info (image WIM_INDEX), adds the other files of the image folder, shows APPLIED_SIZE_MB and the smallest disk for a restore (download on another drive / on the same disk) and writes APPLIED_SIZE_MB to data\pe\config.cmd and data\Media\pe\config.cmd after a question. The applied size counts hard links once (Total Bytes - Hard Link Bytes) plus 4 KB per file and folder; the config.cmd comment is corrected.
  • Add firewall rules (qBittorrent page): adds inbound Windows Firewall rules for the peer port (TCP and UDP), the tracker port (TCP) of qBittorrent.ini and for qbittorrent.exe (one administrator prompt; rules "DVT qBittorrent ..." are replaced). A status line shows whether the rules exist. Install / update qBittorrent adds the rules by itself at the end.
  • Language: the GUI starts in English until a language is chosen (before: the Windows display language). The choice is kept in data\gui_settings.ini.
  • Downloads are used again: a WinPE tools zip in _output\tools_download whose SHA256 matches tools.ini, and a qBittorrent setup in _output\qbt_download whose SHA256 matches the .sha256 file written after its download, are not downloaded again.
  • Start page: chosen at the bottom of the sidebar (a page, or the last page shown) and kept in data\gui_settings.ini (start_page, last_page). The other lines of gui_settings.ini are kept when a setting is saved.
  • Short paths: on the USB / CD media tab "Torrent and aria2", files inside the build folder are shown with a short path (data\Media\config\...) instead of the full path of the PC.

Repository

  • .gitignore: site-specific files (ip.txt, *.torrent, gui_settings.ini), build results and third-party tools are never committed.

DVT v0.4.0

DVT GUI

  • qBittorrent (์‹œ๋”) ํŽ˜์ด์ง€ ์ถ”๊ฐ€(์‚ฌ์ด๋“œ๋ฐ” ๋งจ ์œ„): ์ตœ์‹  ์•ˆ์ • ๋ฒ„์ „์˜ qBittorrent(ํ‘œ์ค€ x64 ๋นŒ๋“œ, SourceForge)๋ฅผ ๋ฐ›์•„ 7-Zip์œผ๋กœ ์ž„์‹œ ํด๋”์— ํ‘ผ ๋’ค ํ”„๋กœ๊ทธ๋žจ ํŒŒ์ผ๋งŒ ๋นŒ๋“œ ํด๋”์˜ qbittorrent\๋กœ ๋ณต์‚ฌํ•ฉ๋‹ˆ๋‹ค(ํฌํ„ฐ๋ธ” ๋ชจ๋“œ, qbittorrent\profile, Windows์—๋Š” ์„ค์น˜ํ•˜์ง€ ์•Š์Œ). ์ด์–ด์„œ ์ด PC์˜ ๋งํฌ ์†๋„์— ๋งž๋Š” ์„ค์ • ํŒŒ์ผ(qbittorrent.ini.1G ๋˜๋Š” .100)์— ์ด PC์˜ IP ์ฃผ์†Œ์™€ ๋„คํŠธ์›Œํฌ ์–ด๋Œ‘ํ„ฐ(๋„คํŠธ์›Œํฌ ์ธํ„ฐํŽ˜์ด์Šค, ๋ฐ”์ธ๋”ฉํ•  IP, ํŠธ๋ž˜์ปค URL)๋ฅผ ๋„ฃ์–ด profile\qBittorrent\config\qBittorrent.ini๋กœ ๋ณต์‚ฌํ•ฉ๋‹ˆ๋‹ค. "์ด PC ๊ธฐ์ค€์œผ๋กœ ์ˆ˜์ •" ๋ฒ„ํŠผ์€ ๊ธฐ์กด ํŒŒ์ผ์˜ ์ด ํ•ญ๋ชฉ๋งŒ ๋‹ค์‹œ ์„ค์ •ํ•ฉ๋‹ˆ๋‹ค. ์ •๋ณด ํŒŒ์ผ: data\qbt.ini.
  • ์ด๋ฏธ์ง€ ํด๋” ์ ๊ฒ€(qBittorrent ํŽ˜์ด์ง€): ํ† ๋ ŒํŠธ๋กœ ๋งŒ๋“ค ํด๋”๋ฅผ ์ ๊ฒ€ํ•˜๊ณ (ํด๋” ์ด๋ฆ„ DL_NAME, ํ•„์ˆ˜ ํŒŒ์ผ backup.wim๊ณผ dvt_check.txt, drivers\์™€ files\setpc.bat๋Š” ์žˆ์œผ๋ฉด ํ‘œ์‹œ) dvt_check.txt๊ฐ€ ์—†์œผ๋ฉด ์•ฝ 4 KB์˜ ํ…์ŠคํŠธ๋กœ ๋งŒ๋“ญ๋‹ˆ๋‹ค.
  • ๋””์Šคํฌ ํฌ๊ธฐ ๊ณ„์‚ฐ(qBittorrent ํŽ˜์ด์ง€): wimlib-imagex info๋กœ backup.wim(์ด๋ฏธ์ง€ WIM_INDEX)์„ ์ฝ๊ณ  ์ด๋ฏธ์ง€ ํด๋”์˜ ๋‹ค๋ฅธ ํŒŒ์ผ์„ ๋”ํ•ด APPLIED_SIZE_MB์™€ ๋ณต์› ๊ฐ€๋Šฅํ•œ ์ตœ์†Œ ๋””์Šคํฌ(๋‹ค๋ฅธ ๋“œ๋ผ์ด๋ธŒ์— ๋‹ค์šด๋กœ๋“œ / ๊ฐ™์€ ๋””์Šคํฌ์— ๋‹ค์šด๋กœ๋“œ)๋ฅผ ๋ณด์—ฌ์ฃผ๋ฉฐ, ํ™•์ธ์„ ๋ฐ›์€ ๋’ค data\pe\config.cmd์™€ data\Media\pe\config.cmd์˜ APPLIED_SIZE_MB์— ์”๋‹ˆ๋‹ค. ๋ณต์› ํ›„ ํฌ๊ธฐ๋Š” ํ•˜๋“œ ๋งํฌ๋ฅผ ํ•œ ๋ฒˆ๋งŒ ์„ธ๊ณ (Total Bytes - Hard Link Bytes) ํŒŒ์ผยทํด๋”๋งˆ๋‹ค 4 KB๋ฅผ ๋”ํ•ฉ๋‹ˆ๋‹ค. config.cmd์˜ ์„ค๋ช…๋„ ๊ณ ์ณค์Šต๋‹ˆ๋‹ค.
  • ๋ฐฉํ™”๋ฒฝ ์˜ˆ์™ธ ์ถ”๊ฐ€(qBittorrent ํŽ˜์ด์ง€): qBittorrent.ini์˜ ํ”ผ์–ด ํฌํŠธ(TCP, UDP), ํŠธ๋ž˜์ปค ํฌํŠธ(TCP)์™€ qbittorrent.exe์— ๋Œ€ํ•œ Windows ๋ฐฉํ™”๋ฒฝ ์ธ๋ฐ”์šด๋“œ ๊ทœ์น™์„ ๊ด€๋ฆฌ์ž ๊ถŒํ•œ ํ•œ ๋ฒˆ์œผ๋กœ ์ถ”๊ฐ€ํ•ฉ๋‹ˆ๋‹ค("DVT qBittorrent ..." ๊ทœ์น™์€ ์ƒˆ๋กœ ๋ฐ”๊ฟˆ). ๊ทœ์น™์ด ์žˆ๋Š”์ง€ ์ƒํƒœ ์ค„์— ํ‘œ์‹œ๋ฉ๋‹ˆ๋‹ค. qBittorrent ์„ค์น˜ / ์—…๋ฐ์ดํŠธ๋Š” ๋งˆ์ง€๋ง‰์— ์ด ๊ทœ์น™์„ ์ž๋™์œผ๋กœ ์ถ”๊ฐ€ํ•ฉ๋‹ˆ๋‹ค.
  • ์–ธ์–ด: ์–ธ์–ด๋ฅผ ๊ณ ๋ฅด๊ธฐ ์ „์—๋Š” ํ•ญ์ƒ ์˜์–ด๋กœ ์‹œ์ž‘ํ•ฉ๋‹ˆ๋‹ค(์ด์ „: Windows ํ‘œ์‹œ ์–ธ์–ด). ์„ ํƒ์€ data\gui_settings.ini์— ์ €์žฅ๋ฉ๋‹ˆ๋‹ค.
  • ๋‚ด๋ ค๋ฐ›์€ ํŒŒ์ผ ์žฌ์‚ฌ์šฉ: _output\tools_download์˜ WinPE ๋„๊ตฌ zip์€ SHA256์ด tools.ini์™€ ๊ฐ™์œผ๋ฉด, _output\qbt_download์˜ qBittorrent ์„ค์น˜ ํŒŒ์ผ์€ ๋‚ด๋ ค๋ฐ›์€ ๋’ค ๊ธฐ๋กํ•œ .sha256๊ณผ ๊ฐ™์œผ๋ฉด ๋‹ค์‹œ ๋ฐ›์ง€ ์•Š์Šต๋‹ˆ๋‹ค.
  • ์‹œ์ž‘ ํ™”๋ฉด: ์‚ฌ์ด๋“œ๋ฐ” ์•„๋ž˜์—์„œ ๊ณ ๋ฅด๋ฉฐ(ํŽ˜์ด์ง€ ํ•˜๋‚˜ ๋˜๋Š” ๋งˆ์ง€๋ง‰ ํ™”๋ฉด) data\gui_settings.ini(start_page, last_page)์— ์ €์žฅ๋ฉ๋‹ˆ๋‹ค. ์„ค์ •์„ ์ €์žฅํ•  ๋•Œ gui_settings.ini์˜ ๋‹ค๋ฅธ ์ค„์€ ๊ทธ๋Œ€๋กœ ๋‘ก๋‹ˆ๋‹ค.
  • ์งง์€ ๊ฒฝ๋กœ ํ‘œ์‹œ: USB / CD ๋ฏธ๋””์–ด์˜ "ํ† ๋ ŒํŠธ์™€ aria2" ํƒญ์—์„œ ๋นŒ๋“œ ํด๋” ์•ˆ์˜ ํŒŒ์ผ์€ PC์˜ ์ „์ฒด ๊ฒฝ๋กœ ๋Œ€์‹  ์งง์€ ๊ฒฝ๋กœ(data\Media\config\...)๋กœ ํ‘œ์‹œํ•ฉ๋‹ˆ๋‹ค.

์ €์žฅ์†Œ

  • .gitignore: ํ˜„์žฅ๋ณ„ ํŒŒ์ผ(ip.txt, *.torrent, gui_settings.ini), ๋นŒ๋“œ ๊ฒฐ๊ณผ๋ฌผ, ์™ธ๋ถ€ ๋„๊ตฌ๊ฐ€ ์ปค๋ฐ‹๋˜์ง€ ์•Š๋„๋ก ํ–ˆ์Šต๋‹ˆ๋‹ค.

Release v0.3.0

Choose a tag to compare

@Zerojinny Zerojinny released this 27 Oct 04:02

DVT v0.3.0

Highlights

  • DVT GUI (DVT_GUI.exe): one window for everything on the build PC. The
    batch files still work on their own; the GUI only edits the settings
    files and starts the scripts.
    • Pages: Client local boot, USB / CD media, Test boot, Prerequisites.
    • Every setting with a short description and full help; drop-down lists
      for settings with fixed choices; rarely changed settings hidden until
      "Show advanced" is checked.
    • Saving changes only the set "NAME=VALUE" lines and keeps a backup in
      _output\gui_backup.
    • USB / CD media: edit ip.txt, the torrent and the WinPE settings of the
      build folder or directly on an existing DVT USB drive.
    • Copy client package: copies _output\boot (or boot_test) to a folder.
    • English and Korean; the text is in lang*.ini, a new language is a
      translated copy of en.ini.
  • Windows ADK setup from the GUI: choose the ADK release (Windows 10 1809
    to the newest), download adksetup.exe / adkwinpesetup.exe from Microsoft
    (Microsoft signature and SHA256 checked, data\adk.ini) and install only
    the Deployment Tools and the WinPE add-on. Offline package for a build PC
    without internet. Another installed version is uninstalled first (ADK
    setup error 2008).
  • WinPE tools download from the GUI: aria2, wimlib and NirCmd (x64) from
    their official sites, SHA256 checked (data\tools.ini), copied to
    pe_tools.

Layout changes

  • The bats folder is now data. 01_make_pe.bat, 02_make_media.bat and
    03_make_test_pe.bat moved into data, together with adk.ini and tools.ini.
    The build folder keeps DVT_GUI.exe, lang, doc, pe_tools, drivers, source
    and _output.
  • BATS_DIR is now DATA_DIR (data\host\config.cmd).
  • nircmd.exe goes in pe_tools with the other tools (NIRCMD_SRC); the
    nircmd-x64 folder is no longer used.

Documentation

  • README and manual: new DVT GUI chapter with screenshots (doc\images);
    every step is explained with the GUI and without it (batch files).
  • Folder layout and paths updated for the data folder.

Upgrading from v0.2.0

  • Copy the values you changed in bats...\config.cmd, bats\test
    test_config.cmd and bats\Media\config (ip.txt, torrent, aria2 profiles)
    to the same files under data. Do not overwrite the new files with the
    old ones.
  • Move nircmd.exe from nircmd-x64 to pe_tools (or use the WinPE tools tab).
  • Run the scripts from data\ (or use DVT_GUI.exe). Rebuild the images so
    that they show the new version.

DVT v0.3.0

์ฃผ์š” ๋ณ€๊ฒฝ

  • DVT GUI(DVT_GUI.exe): ๋นŒ๋“œ PC์˜ ๋ชจ๋“  ์ž‘์—…์„ ์ฐฝ ํ•˜๋‚˜์—์„œ ํ•ฉ๋‹ˆ๋‹ค. GUI๋Š” ์„ค์ • ํŒŒ์ผ์„ ๊ณ ์น˜๊ณ  ์Šคํฌ๋ฆฝํŠธ๋ฅผ ์‹คํ–‰ํ•  ๋ฟ์ด๋ฏ€๋กœ ๋ฐฐ์น˜ ํŒŒ์ผ๋งŒ์œผ๋กœ๋„ ๊ทธ๋Œ€๋กœ ๋™์ž‘ํ•ฉ๋‹ˆ๋‹ค.
    • ํŽ˜์ด์ง€: ํด๋ผ์ด์–ธํŠธ ๋กœ์ปฌ๋ถ€ํŒ…, USB / CD ๋ฏธ๋””์–ด, ํ…Œ์ŠคํŠธ ๋ถ€ํŒ…, ํ•„์ˆ˜ ๊ตฌ์„ฑ ์š”์†Œ.
    • ๋ชจ๋“  ์„ค์ •์— ์งง์€ ์„ค๋ช…๊ณผ ์ž์„ธํ•œ ๋„์›€๋ง์ด ์žˆ๊ณ , ์„ ํƒ์ง€๊ฐ€ ์ •ํ•ด์ง„ ์„ค์ •์€ ๋“œ๋กญ๋‹ค์šด์œผ๋กœ ๊ณ ๋ฆ…๋‹ˆ๋‹ค. ์ž˜ ๋ฐ”๊พธ์ง€ ์•Š๋Š” ์„ค์ •์€ "๊ณ ๊ธ‰ ์„ค์ • ํ‘œ์‹œ"๋ฅผ ์ฒดํฌํ•ด์•ผ ๋ณด์ž…๋‹ˆ๋‹ค.
    • ์ €์žฅํ•  ๋•Œ set "NAME=VALUE" ์ค„๋งŒ ๋ฐ”๊พธ๊ณ  _output\gui_backup์— ๋ฐฑ์—…์„ ๋‚จ๊น๋‹ˆ๋‹ค.
    • USB / CD ๋ฏธ๋””์–ด: ๋นŒ๋“œ ํด๋”๋‚˜ ๊ธฐ์กด DVT USB ๋“œ๋ผ์ด๋ธŒ์˜ ip.txt, ํ† ๋ ŒํŠธ, WinPE ์„ค์ •์„ ์ง์ ‘ ํŽธ์ง‘ํ•ฉ๋‹ˆ๋‹ค.
    • ํด๋ผ์ด์–ธํŠธ ํŒจํ‚ค์ง€ ๋ณต์‚ฌ: _output\boot(๋˜๋Š” boot_test)๋ฅผ ์›ํ•˜๋Š” ํด๋”๋กœ ๋ณต์‚ฌํ•ฉ๋‹ˆ๋‹ค.
    • ํ•œ๊ตญ์–ดยท์˜์–ด ์ง€์›. ๋ฌธ๊ตฌ๋Š” lang*.ini์— ์žˆ์œผ๋ฉฐ, en.ini๋ฅผ ๋ฒˆ์—ญํ•ด ์ƒˆ ์–ธ์–ด๋ฅผ ์ถ”๊ฐ€ํ•  ์ˆ˜ ์žˆ์Šต๋‹ˆ๋‹ค.
  • GUI์—์„œ Windows ADK ์„ค์น˜: ADK ๋ฒ„์ „(Windows 10 1809 ~ ์ตœ์‹ )์„ ๊ณจ๋ผ Microsoft์—์„œ adksetup.exe / adkwinpesetup.exe๋ฅผ ๋ฐ›๊ณ (Microsoft ์„œ๋ช…๊ณผ SHA256 ํ™•์ธ, data\adk.ini) ๋ฐฐํฌ ๋„๊ตฌ์™€ WinPE ์ถ”๊ฐ€ ๊ธฐ๋Šฅ๋งŒ ์„ค์น˜ํ•ฉ๋‹ˆ๋‹ค. ์ธํ„ฐ๋„ท์ด ์•ˆ ๋˜๋Š” ๋นŒ๋“œ PC์šฉ ์˜คํ”„๋ผ์ธ ํŒจํ‚ค์ง€๋ฅผ ์ง€์›ํ•˜๋ฉฐ, ๋‹ค๋ฅธ ๋ฒ„์ „์ด ์„ค์น˜๋˜์–ด ์žˆ์œผ๋ฉด ๋จผ์ € ์ œ๊ฑฐํ•ฉ๋‹ˆ๋‹ค(ADK ์„ค์น˜ ์˜ค๋ฅ˜ 2008).
  • GUI์—์„œ WinPE ๋„๊ตฌ ๋‹ค์šด๋กœ๋“œ: aria2, wimlib, NirCmd(x64)๋ฅผ ๊ณต์‹ ์‚ฌ์ดํŠธ์—์„œ ๋ฐ›์•„ SHA256์„ ํ™•์ธํ•˜๊ณ (data\tools.ini) pe_tools๋กœ ๋ณต์‚ฌํ•ฉ๋‹ˆ๋‹ค.

๊ตฌ์กฐ ๋ณ€๊ฒฝ

  • bats ํด๋” ์ด๋ฆ„์„ data๋กœ ๋ฐ”๊ฟจ์Šต๋‹ˆ๋‹ค. 01_make_pe.bat, 02_make_media.bat, 03_make_test_pe.bat๊ณผ adk.ini, tools.ini๋„ data๋กœ ์˜ฎ๊ฒผ์Šต๋‹ˆ๋‹ค. ๋นŒ๋“œ ํด๋”์—๋Š” DVT_GUI.exe, lang, doc, pe_tools, drivers, source, _output์ด ๋‚จ์Šต๋‹ˆ๋‹ค.
  • BATS_DIR ๋ณ€์ˆ˜ ์ด๋ฆ„์„ DATA_DIR๋กœ ๋ฐ”๊ฟจ์Šต๋‹ˆ๋‹ค(data\host\config.cmd).
  • nircmd.exe๋Š” ๋‹ค๋ฅธ ๋„๊ตฌ์™€ ํ•จ๊ป˜ pe_tools์— ๋‘ก๋‹ˆ๋‹ค(NIRCMD_SRC). nircmd-x64 ํด๋”๋Š” ๋” ์ด์ƒ ์“ฐ์ง€ ์•Š์Šต๋‹ˆ๋‹ค.

๋ฌธ์„œ

  • README์™€ ๋งค๋‰ด์–ผ์— DVT GUI ์žฅ๊ณผ ์Šคํฌ๋ฆฐ์ƒท(doc\images)์„ ์ถ”๊ฐ€ํ–ˆ์Šต๋‹ˆ๋‹ค. ๋ชจ๋“  ๋‹จ๊ณ„๋ฅผ GUI๋กœ ํ•˜๋Š” ๋ฐฉ๋ฒ•๊ณผ ๋ฐฐ์น˜ ํŒŒ์ผ๋กœ ํ•˜๋Š” ๋ฐฉ๋ฒ•์„ ํ•จ๊ป˜ ์„ค๋ช…ํ•ฉ๋‹ˆ๋‹ค.
  • ํด๋” ๊ตฌ์„ฑ๊ณผ ๊ฒฝ๋กœ๋ฅผ data ํด๋” ๊ธฐ์ค€์œผ๋กœ ๊ณ ์ณค์Šต๋‹ˆ๋‹ค.

v0.2.0์—์„œ ์˜ฌ๋ฆด ๋•Œ

  • bats...\config.cmd, bats\test\test_config.cmd, bats\Media\config(ip.txt, ํ† ๋ ŒํŠธ, aria2 ํ”„๋กœํ•„)์—์„œ ๋ฐ”๊พผ ๊ฐ’์„ data\ ์•„๋ž˜์˜ ๊ฐ™์€ ํŒŒ์ผ๋กœ ์˜ฎ๊ธฐ์„ธ์š”. ์ƒˆ ํŒŒ์ผ์„ ์ด์ „ ํŒŒ์ผ๋กœ ๋ฎ์–ด์“ฐ์ง€ ๋งˆ์„ธ์š”.
  • nircmd.exe๋ฅผ nircmd-x64์—์„œ pe_tools๋กœ ์˜ฎ๊ธฐ์„ธ์š”(๋˜๋Š” WinPE ๋„๊ตฌ ํƒญ ์‚ฌ์šฉ).
  • ์Šคํฌ๋ฆฝํŠธ๋Š” data\์—์„œ ์‹คํ–‰ํ•˜์„ธ์š”(๋˜๋Š” DVT_GUI.exe ์‚ฌ์šฉ). ์ƒˆ ๋ฒ„์ „์ด ํ‘œ์‹œ๋˜๋„๋ก ์ด๋ฏธ์ง€๋ฅผ ๋‹ค์‹œ ๋นŒ๋“œํ•˜์„ธ์š”.

Release v0.2.0

Choose a tag to compare

@Zerojinny Zerojinny released this 23 Oct 01:05
2d18aec

DVT v0.2.0

Highlights

  • Safer disk detection: the disk to erase is found by the disk ID of the Windows disk (GPT GUID / MBR signature) instead of the DVT.tag marker file. It also works on BitLocker drives. The RAW-volume search remains as a fallback for PCs with instant recovery software (AUTO_DISK_FALLBACK).
  • BitLocker: make_boot.bat suspends the protection for one restart, so a PC that returns to Windows after a failed check does not ask for the recovery key (BITLOCKER_SUSPEND).
  • Disk space check: the restore stops before erasing anything if the image does not fit (SPACE_CHECK).
  • Image index: choose the image inside backup.wim with WIM_INDEX (default 1).
  • Restore record: the version, boot mode, image and time are written to HKLM\SOFTWARE\DVT in the restored Windows.
  • Static IP networks: WinPE no longer waits for DHCP at startup. Static DNS servers are passed from Windows, and the media's ip.txt accepts DNS lines.
  • USB / CD media: FORCE_DISK support. Asks whether to reuse the existing media image. The FAT32 32 GB check was removed.
  • Version display: the DVT version is shown on every screen (bats\common\version.cmd).

Layout changes

  • Scripts moved to bats\host, bats\pe, bats\Media and bats\test. The WinPE scripts used by all three boot modes now live in bats\common.
  • ADK files go in source, and build results in _output (boot, boot_test, media).
  • The test image runs from C:\temp\boot_test on the client.

Documentation

  • Added the README, the Markdown manual (English / Korean) and PDFs.
  • Added qBittorrent 5.3.0 seeder and tracker settings and ready-made settings files (doc\qbittorrent.ini).

Upgrading from v0.1

  • Do not overwrite the new config.cmd files with the old ones; copy over only the values you changed.
  • Rebuild all three images and replace C:\temp\boot on the clients.
  • A leftover C:\DVT.tag is no longer used and can be deleted.

DVT v0.2.0

์ฃผ์š” ๋ณ€๊ฒฝ

  • ์ง€์šธ ๋””์Šคํฌ ํŒ๋ณ„ ๊ฐœ์„ : ํ‘œ์‹ ํŒŒ์ผ(DVT.tag) ๋Œ€์‹  Windows ๋””์Šคํฌ์˜ ๋””์Šคํฌ ID(GPT GUID / MBR ์„œ๋ช…)๋กœ ์ฐพ์Šต๋‹ˆ๋‹ค. BitLocker ๋“œ๋ผ์ด๋ธŒ์—์„œ๋„ ๋™์ž‘ํ•ฉ๋‹ˆ๋‹ค. RAW ๋ณผ๋ฅจ ๊ฒ€์ƒ‰์€ ์ˆœ๊ฐ„๋ณต๊ตฌ ํ”„๋กœ๊ทธ๋žจ์ด ์„ค์น˜๋œ PC๋ฅผ ์œ„ํ•œ ๋ณด์กฐ ๊ทœ์น™์œผ๋กœ ๋‚จ๊ฒผ์Šต๋‹ˆ๋‹ค(AUTO_DISK_FALLBACK).
  • BitLocker ์ผ์‹œ ์ค‘๋‹จ: make_boot.bat์ด ๋ณดํ˜ธ๋ฅผ ์žฌ์‹œ์ž‘ 1ํšŒ ๋™์•ˆ ๋ฉˆ์ถฅ๋‹ˆ๋‹ค. ์ ๊ฒ€์— ์‹คํŒจํ•ด Windows๋กœ ๋Œ์•„๊ฐ€๋„ ๋ณต๊ตฌ ํ‚ค๋ฅผ ๋ฌป์ง€ ์•Š์Šต๋‹ˆ๋‹ค(BITLOCKER_SUSPEND).
  • ๋””์Šคํฌ ๊ณต๊ฐ„ ๊ฒ€์‚ฌ: ์ด๋ฏธ์ง€๊ฐ€ ๋“ค์–ด๊ฐˆ ๊ณต๊ฐ„์ด ์—†์œผ๋ฉด ๋””์Šคํฌ๋ฅผ ์ง€์šฐ๊ธฐ ์ „์— ๋ฉˆ์ถฅ๋‹ˆ๋‹ค(SPACE_CHECK).
  • ์ด๋ฏธ์ง€ ๋ฒˆํ˜ธ ์„ ํƒ: WIM_INDEX๋กœ backup.wim ์•ˆ์˜ ์ด๋ฏธ์ง€๋ฅผ ๊ณ ๋ฆ…๋‹ˆ๋‹ค(๊ธฐ๋ณธ 1).
  • ๋ณต์› ๊ธฐ๋ก: ๋ณต์›๋œ Windows์˜ HKLM\SOFTWARE\DVT์— ๋ฒ„์ „, ๋ถ€ํŒ… ๋ฐฉ์‹, ์ด๋ฏธ์ง€, ์‹œ๊ฐ ๋“ฑ์„ ๋‚จ๊น๋‹ˆ๋‹ค.
  • ๊ณ ์ • IP ๋„คํŠธ์›Œํฌ ๊ฐœ์„ : WinPE ์‹œ์ž‘ ๋•Œ DHCP๋ฅผ ๊ธฐ๋‹ค๋ฆฌ์ง€ ์•Š์Šต๋‹ˆ๋‹ค. Windows์˜ ๊ณ ์ • DNS๋ฅผ WinPE์— ์ „๋‹ฌํ•˜๊ณ , ๋ฏธ๋””์–ด์˜ ip.txt์—๋„ DNS๋ฅผ ์ ์„ ์ˆ˜ ์žˆ์Šต๋‹ˆ๋‹ค.
  • USB / CD ๋ฏธ๋””์–ด: FORCE_DISK ์ง€์›. ๊ธฐ์กด ๋ฏธ๋””์–ด ์ด๋ฏธ์ง€๋ฅผ ๋‹ค์‹œ ์“ธ์ง€ ๋ฌป์Šต๋‹ˆ๋‹ค. FAT32 32GB ์ œํ•œ ๊ฒ€์‚ฌ๋ฅผ ์—†์•ด์Šต๋‹ˆ๋‹ค.
  • ๋ฒ„์ „ ํ‘œ์‹œ: ๋ชจ๋“  ํ™”๋ฉด์— DVT ๋ฒ„์ „์ด ๋‚˜์˜ต๋‹ˆ๋‹ค(bats\common\version.cmd).

๊ตฌ์กฐ ๋ณ€๊ฒฝ

  • ์Šคํฌ๋ฆฝํŠธ๋ฅผ bats\host, bats\pe, bats\Media, bats\test๋กœ ์˜ฎ๊ฒผ์Šต๋‹ˆ๋‹ค. ์„ธ ๋ถ€ํŒ… ๋ฐฉ์‹์ด ํ•จ๊ป˜ ์“ฐ๋Š” WinPE ์Šคํฌ๋ฆฝํŠธ๋Š” bats\common ํ•˜๋‚˜๋กœ ํ•ฉ์ณค์Šต๋‹ˆ๋‹ค.
  • ADK ํŒŒ์ผ์€ source์—, ๋นŒ๋“œ ๊ฒฐ๊ณผ๋ฌผ์€ _output(boot, boot_test, media)์— ๋‘ก๋‹ˆ๋‹ค.
  • ํ…Œ์ŠคํŠธ ์ด๋ฏธ์ง€๋Š” ํด๋ผ์ด์–ธํŠธ์˜ C:\temp\boot_test์—์„œ ์‹คํ–‰ํ•ฉ๋‹ˆ๋‹ค.

๋ฌธ์„œ

  • README์™€ Markdown ๋งค๋‰ด์–ผ(์˜์–ดยทํ•œ๊ตญ์–ด)๊ณผ PDF๋ฅผ ์ถ”๊ฐ€ํ–ˆ์Šต๋‹ˆ๋‹ค.
  • qBittorrent 5.3.0 ๊ธฐ์ค€ ์‹œ๋”ยทํŠธ๋ž˜์ปค ์„ค์ • ์•ˆ๋‚ด์™€ ์„ค์ • ํŒŒ์ผ(doc\qbittorrent.ini)์„ ์ถ”๊ฐ€ํ–ˆ์Šต๋‹ˆ๋‹ค.

v0.1์—์„œ ์˜ฌ๋ฆด ๋•Œ

  • config.cmd๋ฅผ ๋ฎ์–ด์“ฐ์ง€ ๋ง๊ณ  ๋ฐ”๊พผ ๊ฐ’๋งŒ ์ƒˆ ํŒŒ์ผ๋กœ ์˜ฎ๊ธฐ์„ธ์š”.
  • ์„ธ ์ด๋ฏธ์ง€๋ฅผ ๋ชจ๋‘ ๋‹ค์‹œ ๋นŒ๋“œํ•˜๊ณ  ํด๋ผ์ด์–ธํŠธ์˜ C:\temp\boot๋ฅผ ๊ต์ฒดํ•˜์„ธ์š”.
  • ๋‚จ์•„ ์žˆ๋Š” C:\DVT.tag๋Š” ๋” ์ด์ƒ ์“ฐ์ง€ ์•Š์œผ๋ฏ€๋กœ ์ง€์›Œ๋„ ๋ฉ๋‹ˆ๋‹ค.

Release v0.1.0

Choose a tag to compare

@Zerojinny Zerojinny released this 16 Oct 23:38
a92a3ec

First release.