Skip to content

Release v0.3.0

Choose a tag to compare

@Zerojinny Zerojinny released this 27 Oct 04:02
· 1 commit to main since this release

DVT v0.3.0

Highlights

  • DVT GUI (DVT_GUI.exe): one window for everything on the build PC. The
    batch files still work on their own; the GUI only edits the settings
    files and starts the scripts.
    • Pages: Client local boot, USB / CD media, Test boot, Prerequisites.
    • Every setting with a short description and full help; drop-down lists
      for settings with fixed choices; rarely changed settings hidden until
      "Show advanced" is checked.
    • Saving changes only the set "NAME=VALUE" lines and keeps a backup in
      _output\gui_backup.
    • USB / CD media: edit ip.txt, the torrent and the WinPE settings of the
      build folder or directly on an existing DVT USB drive.
    • Copy client package: copies _output\boot (or boot_test) to a folder.
    • English and Korean; the text is in lang*.ini, a new language is a
      translated copy of en.ini.
  • Windows ADK setup from the GUI: choose the ADK release (Windows 10 1809
    to the newest), download adksetup.exe / adkwinpesetup.exe from Microsoft
    (Microsoft signature and SHA256 checked, data\adk.ini) and install only
    the Deployment Tools and the WinPE add-on. Offline package for a build PC
    without internet. Another installed version is uninstalled first (ADK
    setup error 2008).
  • WinPE tools download from the GUI: aria2, wimlib and NirCmd (x64) from
    their official sites, SHA256 checked (data\tools.ini), copied to
    pe_tools.

Layout changes

  • The bats folder is now data. 01_make_pe.bat, 02_make_media.bat and
    03_make_test_pe.bat moved into data, together with adk.ini and tools.ini.
    The build folder keeps DVT_GUI.exe, lang, doc, pe_tools, drivers, source
    and _output.
  • BATS_DIR is now DATA_DIR (data\host\config.cmd).
  • nircmd.exe goes in pe_tools with the other tools (NIRCMD_SRC); the
    nircmd-x64 folder is no longer used.

Documentation

  • README and manual: new DVT GUI chapter with screenshots (doc\images);
    every step is explained with the GUI and without it (batch files).
  • Folder layout and paths updated for the data folder.

Upgrading from v0.2.0

  • Copy the values you changed in bats...\config.cmd, bats\test
    test_config.cmd and bats\Media\config (ip.txt, torrent, aria2 profiles)
    to the same files under data. Do not overwrite the new files with the
    old ones.
  • Move nircmd.exe from nircmd-x64 to pe_tools (or use the WinPE tools tab).
  • Run the scripts from data\ (or use DVT_GUI.exe). Rebuild the images so
    that they show the new version.

DVT v0.3.0

주요 변경

  • DVT GUI(DVT_GUI.exe): 빌드 PC의 모든 작업을 창 하나에서 합니다. GUI는 설정 파일을 고치고 스크립트를 실행할 뿐이므로 배치 파일만으로도 그대로 동작합니다.
    • 페이지: 클라이언트 로컬부팅, USB / CD 미디어, 테스트 부팅, 필수 구성 요소.
    • 모든 설정에 짧은 설명과 자세한 도움말이 있고, 선택지가 정해진 설정은 드롭다운으로 고릅니다. 잘 바꾸지 않는 설정은 "고급 설정 표시"를 체크해야 보입니다.
    • 저장할 때 set "NAME=VALUE" 줄만 바꾸고 _output\gui_backup에 백업을 남깁니다.
    • USB / CD 미디어: 빌드 폴더나 기존 DVT USB 드라이브의 ip.txt, 토렌트, WinPE 설정을 직접 편집합니다.
    • 클라이언트 패키지 복사: _output\boot(또는 boot_test)를 원하는 폴더로 복사합니다.
    • 한국어·영어 지원. 문구는 lang*.ini에 있으며, en.ini를 번역해 새 언어를 추가할 수 있습니다.
  • GUI에서 Windows ADK 설치: ADK 버전(Windows 10 1809 ~ 최신)을 골라 Microsoft에서 adksetup.exe / adkwinpesetup.exe를 받고(Microsoft 서명과 SHA256 확인, data\adk.ini) 배포 도구와 WinPE 추가 기능만 설치합니다. 인터넷이 안 되는 빌드 PC용 오프라인 패키지를 지원하며, 다른 버전이 설치되어 있으면 먼저 제거합니다(ADK 설치 오류 2008).
  • GUI에서 WinPE 도구 다운로드: aria2, wimlib, NirCmd(x64)를 공식 사이트에서 받아 SHA256을 확인하고(data\tools.ini) pe_tools로 복사합니다.

구조 변경

  • bats 폴더 이름을 data로 바꿨습니다. 01_make_pe.bat, 02_make_media.bat, 03_make_test_pe.bat과 adk.ini, tools.ini도 data로 옮겼습니다. 빌드 폴더에는 DVT_GUI.exe, lang, doc, pe_tools, drivers, source, _output이 남습니다.
  • BATS_DIR 변수 이름을 DATA_DIR로 바꿨습니다(data\host\config.cmd).
  • nircmd.exe는 다른 도구와 함께 pe_tools에 둡니다(NIRCMD_SRC). nircmd-x64 폴더는 더 이상 쓰지 않습니다.

문서

  • README와 매뉴얼에 DVT GUI 장과 스크린샷(doc\images)을 추가했습니다. 모든 단계를 GUI로 하는 방법과 배치 파일로 하는 방법을 함께 설명합니다.
  • 폴더 구성과 경로를 data 폴더 기준으로 고쳤습니다.

v0.2.0에서 올릴 때

  • bats...\config.cmd, bats\test\test_config.cmd, bats\Media\config(ip.txt, 토렌트, aria2 프로필)에서 바꾼 값을 data\ 아래의 같은 파일로 옮기세요. 새 파일을 이전 파일로 덮어쓰지 마세요.
  • nircmd.exe를 nircmd-x64에서 pe_tools로 옮기세요(또는 WinPE 도구 탭 사용).
  • 스크립트는 data\에서 실행하세요(또는 DVT_GUI.exe 사용). 새 버전이 표시되도록 이미지를 다시 빌드하세요.