-
Notifications
You must be signed in to change notification settings - Fork 1
types.h
Contains all data types definitions used in 2Boost code except for uint16 and uint8 which are defined in macros.h as macros.
Macro used to type casting when calling getPointerFromLut function. Its primary goal is to eliminate compile time warning.
Describes if CEL Flash is globally enabled or disabled.
| Name | Descripton |
|---|---|
| CEL_FLASH_DISABLED | CEL flash disabled |
| CEL_FLASH_ENABLED | CEL flash enbled |
Describes whether the values of the mass airflow calculated by MAF sensor and Speed Density are blended or not.
| Name | Descripton |
|---|---|
| MAF_SD_BLENDING_OFF | Blending is disabled. Airflow calculated by SD is used. |
| MAF_SD_BLENDING_ON | MAF/SD blending enabled. Air flow is calcutaled by formula airFlowFromSD=MAF*(1-Blend_Value) + SD*Blend_Value
|
Describes how map sets are switched. Currently Cruise on/off button and Si-Drive switch are suppported.
| Name | Descripton |
|---|---|
| MAP_SWITCH_SOURCE_NONE | No switching is done |
| MAP_SWITCH_SOURCE_CRUISE | Cruise on/off switch is used for switching |
| MAP_SWITCH_SOURCE_SI_DRIVE | Si-Drive switch is used for switching |
Describes overtake button. Currently Cruise Cancel button is supported.
| Name | Descripton |
|---|---|
| OVERTAKE_BUTTON_SOURCE_NONE | Overtake button disabled |
| OVERTAKE_BUTTON_SOURCE_CRUISE_CANCEL | Cruise cancel switch is Overtake button |
Si-Drive state - none (in case of Si-Drive error), Intelligent, Sport, Sport Sharp.
| Name | Descripton |
|---|---|
| SI_DRIVE_STATE_NONE | Error |
| SI_DRIVE_STATE_INTELLIGENT | Si-Drive Intelligent |
| SI_DRIVE_STATE_SPORT | Si-Drive Sport |
| SI_DRIVE_STATE_SPORT_SHARP | Si-Drive Sport Sharp |
Used to define a debug variable.
Struct that defines pointer structure to 2D table. Data will be returned as is by calling calc_2d_float_to_float, calc_2d_uint8_to_uint8 (not implemented) or calc_2d_uint16_to_uint16 (not implemented) functions.
| Struct field | Descripton |
|---|---|
uint16 x_len
|
X axis elements count |
uint16 data_type
|
Data type. Must equals to 0
|
const void *x_axis_ptr |
Pointer to X axis array of float |
const void *data_ptr |
Pointer to data array of float, uint8 or uint16
|
Struct that defines pointer structure to 2D table. Data will be converted to float at runtime by calling calc_2d_uint_to_float function.
| Struct field | Descripton |
|---|---|
uint16 x_len
|
X axis elements count |
uint16 data_type
|
Data type.0x800 for uint16, 0x400 for uint8
|
const void *x_axis_ptr |
Pointer to X axis array of float |
const void *data_ptr |
Pointer to data array. Array type must correspond to the value of data_type field |
float multiplier |
Data cell is multiplied by this number and then ... |
float offset |
... added with this number |
Struct that defines pointer structure to 3D table. Data will be converted to float at runtime by calling calc_3d_uint_to_float function.
| Struct field | Descripton |
|---|---|
uint16 x_len
|
X axis elements count |
uint16 y_len
|
Y axis elements count |
uint16 data_type
|
Data type.0x8000000 for uint16, 0x4000000 for uint8
|
const void *x_axis_ptr |
Pointer to X axis array of float |
const void *y_axis_ptr |
Pointer to Y axis array of float |
const void *data_ptr |
Pointer to data array. Array type must correspond to the value of data_type field |
float multiplier |
Data cell is multiplied by this number and then ... |
float offset |
... added with this number |
Struct that defines RAM variables.
| Struct field | Descripton |
|---|---|
uint8 globalMapSwitch
|
What map to use |
uint8 mapSelected
|
Actually selected map number |
uint8 mafSdBlendMode
|
MAF/SD blending mode |
uint8 celLightIsOn
|
Current dashboard CEL light status Substitutes ROM CEL light status if CEL Flash Hack #2 is enabled |
float airFlowFromMaf |
Mass airflow from MAF sensor - only if Speed Density enabled |
float volumetricEfficiency |
Volumetric efficiency table value - only if Speed Density enabled |
float volumetricEfficiencyTipIn |
Volumetric efficiency tip-in table value - only if Speed Density enabled |
float mafSdBlendValue |
MAF/SD blending table value - only if Speed Density enabled |
float airFlowFromSdNotBlended |
SD calculated mass airflow without blending |
float airFlowFromSD |
Final SD calculated mass airflow with all corrections applied |
uint8 OvertakeMode
|
Overtake mode state |
uint8 celFlashEnabled
|
CEL flash enabled/disabled flag - do it needs to flash now |
uint8 celLightSavedOemState
|
ROM CEL saved state |
| int celFlashCounter | Counter variable |
| int celFlashOnCount | How long keep CEL light on |
| int celFlashOffCount | How long keep CEL light off |
| int celFlashCyclesCounter | Counter variable for number of on-off cycles |