Skip to content

JamesOS 1.0b

Choose a tag to compare

@aarongrando aarongrando released this 17 Nov 22:16
· 5 commits to main since this release

Every screen is redrawn. 1.0b is the first big update since launch.

Before and after screens: https://gjelly.com/JamesOS/whats-new

A new interface

The display now uses its full detail. Text is smooth, and every control has its own picture that shows the setting: the waveform, the filter curve, the echoes, the reverb tail.

The header shows the engine icon beside the sound name. Filters, envelopes and the compressor are drawn as curves you can read while you turn.

Songs

Put your patterns in order with the new arranger. A song holds up to 64 blocks, each 1 to 16 bars, and it is saved with your project.

More to play

128 starting sounds, up from 64. Polyphony on the synth tracks, with 3 to 8 voices depending on the engine.

A rebuilt sound path

New filters, a new shared reverb and a master limiter. Every effect page has a fourth control, and delay and reverb pre-delay can follow the tempo.

JamesOS-K

The same firmware, now on the SMK-37 Pro, with its own manual. It is new, and feedback is welcome.

Be aware before you update

Projects saved with 1.0a show as OLD FORMAT and need converting in the Editor. Updating does not erase them. The steps are under "Before you update" in the full release notes below.

Have fun with it.


Full release notes

Every change from 1.0a to 1.0b, build 3083.

How to update

  1. Open the installer at /JamesOS/install in Chrome or Edge on a desktop computer.
  2. Connect the instrument with a USB data cable.
  3. Follow the steps on screen.
  4. Keep the instrument connected until it restarts.

An interrupted update can leave the instrument unresponsive.

Before you update

Be aware that projects saved with 1.0a do not load directly in 1.0b. They show as OLD FORMAT.

  • Updating does not erase projects saved with 1.0a.
  • If you save over a slot that shows OLD FORMAT, the old project is replaced.

What to do:

  1. Save any work you want to keep into a named slot before you update. The unsaved live session cannot be converted.
  2. Keep your own backup.
  3. After updating, open the Editor, pick the old project and download its original. Keep that file.
  4. Use the Editor's upgrade action and read what it tells you. Import the result into an empty slot you choose.
  5. Listen to the result. Keep the original until you are happy.
  • Conversion can approximate some settings or refuse a project. It does not promise the same sound.
  • The mix, filter, reverb and delay behave differently from 1.0a, so a converted project can sound a little different.
  • Projects saved by 1.0b cannot be opened by 1.0a.
  • Switching firmware can overwrite another firmware's saved data. Back up first.

Interface

  • Added a picture for every control. Each one shows the setting: the waveform, the filter curve, the envelope, the echoes or the reverb tail.
  • Added a new typeface. Text is smoother and easier to read.
  • The header now shows the engine icon beside the sound name, on both HOME pages.
  • Added charts for the filters, the envelopes and the compressor, drawn as curves you can read while you turn.
  • Faders and level meters in the mixer are now larger.
  • The selected level in the mixer now shows in dB.
  • The display now redraws only what changed.
  • Removed the old interface. Both products now use the new one.
  • Removed a doubled line at the bottom of large charts.
  • The PATCH AMOUNT control now uses the same slider as LFO DEPTH.
  • The KEY TRACK switch now uses the track colour when it is on.
  • If the processor is overloaded while you play, the CPU monitor now turns on and shows CPU USAGE HIGH. MONITOR ENABLED. once per session.
  • A screen reader can now read page names, selected items, values and messages over USB MIDI. Open the FM-1 Screen Reader page in Chrome or Edge and choose Connect.

Song arranger

  • Added a song arranger. Put patterns in order to make a song.
  • A song holds up to 64 blocks, and each block is 1 to 16 bars.
  • The arrangement is saved with your project.
  • You can now set the song to stop or loop at its end.
  • You can switch back to pattern mode at any time to play live.
  • BARS now lights one to four slots, and adds a plus for longer blocks.
  • LOOP MODE now shows a closed loop when on and a struck-through loop when off.
  • PERFORM now shows a single block for pattern mode and a row of blocks for arrange mode.

Polyphony

  • Added polyphony on the synth tracks.
  • With playback stopped, press OCT- and PLAY on HOME to turn on polyphonic play for the selected synth track.
  • The number of voices depends on the engine, from 3 to 8.
  • While polyphony is on, the other tracks are not available. Their sounds and patterns are kept.
  • Normal multitrack play returns when you start the sequencer.
  • With some engines, the punch ECHO effect is not available while polyphony is on. The screen shows ECHO UNAVAILABLE IN POLY.
  • JamesOS-K has polyphony too, with the same gesture.

Sounds

  • The sound list now has 128 starting sounds, up from 64.
  • The first 32 are favourites. The rest are grouped as bass, leads, keys, pads, arps and more.
  • The 80S and 90S drum kits are now made with Plaits percussion. They sound different from the old sampled kits.
  • A project that used an old kit loads with the new one and shows a short message.
  • Added a deep menu on HOME with voice controls: portamento time, glide mode, amplitude mode and, in LPG mode, a timed gate. Press OCT- with HOME to open it.

Effects

  • Added a fourth control to each effect page, each with its own picture.
  • The fourth controls are BIAS on DRIVE, TONE on DELAY, FEEDBACK on MODULATION and PRE DELAY on REVERB.
  • Wet amount stays on FX SENDS.
  • Delay time now has 16 note values, from 1/32T to 1 BAR. T marks a triplet and D a dotted value.
  • Reverb pre-delay can now follow the tempo. Choose AUTO, or a note value from 1/64T to 1/8.
  • The shared reverb now has a new engine, with ROOM, HALL and SPACE.
  • The modulation RATE control now uses the same turning ring as the LFO.

Mix and master

  • Added a master limiter with a soft knee at the end of the mix.
  • LEVEL controls now follow a new curve, with finer control at low levels.
  • PAN now keeps the same loudness across the stereo field.
  • Delay feedback now has a wider range.
  • Delay repeats now saturate gently instead of running away.

Modulation and filters

  • Each track, including the drum kit, now has two patches for routing modulation.
  • Added a global LFO, shared across the instrument. It can be a source in track patches.
  • Added MODEL as an LFO target on Plaits synth tracks. It changes the engine in steps, so fast settings can click.
  • Added Random per Note, which picks one new value for each note and holds it.
  • Added a four-pole ladder low-pass filter and a new high-pass filter.
  • The filter control now runs from low-pass through open to high-pass, and modulation can sweep through the open point.
  • On GLOBAL, FILTER, hold OCT- and turn knob 1 to snap between low-pass, OPEN and high-pass.
  • On GLOBAL, PAN, the same gesture snaps to 100% left, centre and 100% right.

Sequencer

  • When a pattern is longer than 16 steps, the cue at the bottom of the sequencer screen switches every 3 seconds between SHIFT NOTES and STEP BANK.
  • The song position now shows above the step strip.

Projects and saving

  • Saving and INIT now work with REC armed. REC is paused for the save and restored afterwards.
  • The browser Editor can now export a saved project to a file, and import a project into a slot you choose.
  • The Editor works on saved slots, and supports the FM-1 only for now.
  • Older projects are listed as OLD FORMAT and cannot be loaded. See Before you update.

JamesOS-K for the SMK-37 Pro

JamesOS-K brings the same sounds and workflow to the SMK-37 Pro.

  • JamesOS-K is a separate package. FM-1 and SMK-37 Pro packages are not interchangeable.
  • The Editor does not support the SMK-37 Pro yet.

Button layout:

  • KNOB BANK is HOME. On the sound list, it moves to the next category.
  • PATCH opens the sound and kit list. Hold it for 0.8 seconds to turn HOLD on or off.
  • SCALE is the LFO button.
  • CHORD is EDIT, with PATCH 1 and PATCH 2.
  • NOTE REPEAT opens RETRIGGER on the drum track. On synth tracks it is the punch shift key.
  • Hold ARP for 0.8 seconds to turn the arpeggiator on or off. On the drum track, the ARP page says SWITCH TO T1 T2 T3.
  • FADER BANK opens the mixer page for its bank: MIXER for the tracks, KIT LEVEL for the drum lanes. Moving a fader on any other page shows a short mixer view.
  • GLOBE cycles PAN, FILTER, HEAT, COMPRESSOR and COMP TIME.
  • Fader link lets fader 1 set two channels together: T1 and T2 on the track bank, lanes 1 and 2 on the drum bank. Hold NOTE REPEAT and SCALE for 0.8 seconds to turn it on or off.

Bug fixes

  • The first HALL reverb tail was wrong after switching from ROOM.
  • A note recorded during a pass was played again in the same pass.
  • Step recording while stopped did not move the cursor on.
  • PLAY did not act as the transport key while a step was held.

Known issues

  • With external clock, JamesOS can join two to three beats late if a master starts clock and playback together.
  • Tracks with different step rates can drift at some tempos: about 35 ms over 64 bars at 133 BPM, and none at 60, 120 or 240 BPM.
  • Drum retrigger repeats can land up to 4.9 ms early.
  • When several silent synth tracks start a note at the same moment, their starts are spread by 5.8 and 11.6 ms. This is by design.

Files

Builds: FM-1 FM-1_9673083, SMK-37 Pro SMK-37 Pro_9653083. SHA-256: