Message Chunking

Message Chunking (CHUNK_GET)

SPDM 1.2 added a Large SPDM message transfer mechanism (DSP0274 Sec. 10.27): when a response is larger than the requester's DataTransferSize, the responder returns ERROR(LargeResponse) and the requester fetches the message in pieces with CHUNK_GET / CHUNK_RESPONSE, then reassembles it. wolfSPDM implements the requester (CHUNK_GET) side.

This is what lets ML-DSA-87 work over the wire: its KEY_EXCHANGE_RSP / CHALLENGE_AUTH / signed MEASUREMENTS (~4.7–4.8 KB) exceed the common DataTransferSize (spdm-emu advertises 4608 B), so the responder chunks them.

How it works

• In GET_CAPABILITIES wolfSPDM advertises CHUNK_CAP and a DataTransferSize equal to the MTU (WOLFSPDM_CHUNK_BUF_SIZE). The responder splits any response larger than that.
• Reassembly is transparent: it hooks the two transport functions (wolfSPDM_SendReceive for cleartext KEY_EXCHANGE / CHALLENGE, and wolfSPDM_SecuredExchange for the encrypted GET_MEASUREMENTS), so every parser sees a complete logical message and the transcript/hash stay correct. The chunk transport messages themselves are not hashed.
• Zero dynamic allocation: a single fixed WOLFSPDM_CHUNK_BUF_SIZE buffer in the context holds one CHUNK_RESPONSE; the reassembled message lands in the caller's existing message buffer.

The ChunkSeqNo field is u16 for SPDM < 1.4 and u32 for ≥ 1.4; wolfSPDM emits the version-appropriate form. The first chunk (ChunkSeqNo == 0) carries LargeMessageSize, which is bounds-checked against the output buffer.

Compile-time configuration

Macro / option	Default	Effect
--disable-chunking / WOLFSPDM_NO_CHUNK	enabled	Compile the engine out entirely (no CHUNK_CAP advertised)
WOLFSPDM_CHUNK_BUF_SIZE	4096	MTU = advertised DataTransferSize = transport buffer size. Lower it for constrained devices (smaller buffer, more round-trips)
WOLFSPDM_CHUNK_NO_SECURED	—	Keep cleartext chunking but compile out the encrypted (in-session MEASUREMENTS) path
WOLFSPDM_CHUNK_MAX_CHUNKS	64	Reassembly loop guard (max chunks per message)

The configure summary prints Chunking: enabled|disabled.

WOLFSPDM_CHUNK_BUF_SIZE has a hard floor of 64 (it must hold a CHUNK_RESPONSE header plus payload).

Memory and interop notes

• Advertised DataTransferSize drops to the MTU. With chunking enabled, GET_CAPABILITIES advertises DataTransferSize = WOLFSPDM_CHUNK_BUF_SIZE (4096 by default) rather than WOLFSPDM_MAX_MSG_SIZE. This is the intended constrained-device tradeoff — the responder chunks anything larger. A responder that does not implement CHUNK_CAP must then keep every single response within that MTU; raise WOLFSPDM_CHUNK_BUF_SIZE if you need a larger single-message limit while still reassembling anything above it. Two ceilings apply: it must stay <= WOLFSPDM_MAX_MSG_SIZE (the secured path decrypts each chunk through a WOLFSPDM_MAX_MSG_SIZE stage buffer — a compile-time #error enforces this), and raising it enlarges the in-context chunkBuf, so bump WOLFSPDM_CTX_STATIC_SIZE to match (a _Static_assert in spdm_context.c enforces that — in ML-DSA builds the context already sits ~1 KB under the cap).
• Secured path stack. In-session reassembly (GET_MEASUREMENTS) encrypts each CHUNK_GET and decrypts each CHUNK_RESPONSE. Nested under wolfSPDM_SecuredExchange's frame plus the AEAD scratch buffers, peak stack approaches ~30 KB in ML-DSA builds during a chunked GET_MEASUREMENTS (it scales with WOLFSPDM_MAX_MSG_SIZE and WOLFSPDM_CHUNK_BUF_SIZE). Lower the MTU or use WOLFSPDM_CHUNK_NO_SECURED on stack-constrained targets.
• Untrusted input. Every CHUNK_RESPONSE byte is responder-controlled; the reassembler validates ChunkSize with overflow-safe (subtraction) bounds, echoes of Handle/ChunkSeqNo, and the per-message and total length before any copy.

Why CHUNK_GET only (no CHUNK_SEND)

The mechanism has two directions, controlled by different endpoints:

• CHUNK_GET pulls a large response the responder chose to split. The requester has no control over a responder's reply size (an ML-DSA-87 signature is 4627 B regardless), so it must be able to reassemble one. wolfSPDM implements this.
• CHUNK_SEND pushes a large request in pieces. This is requester-initiated: the requester decides to chunk its own outbound request; a responder cannot force it.

Every request wolfSPDM builds (GET_VERSION through GET_MEASUREMENTS, KEY_EXCHANGE, FINISH) is small and fixed, well under any responder's DataTransferSize, so CHUNK_SEND is never needed — it is not applicable to this library's traffic rather than missing. CHUNK_CAP advertises support for the large-message mechanism; it does not obligate an endpoint to chunk requests it never sends, so a requester that only emits small requests is fully conformant supporting CHUNK_GET alone. CHUNK_SEND / CHUNK_SEND_ACK are defined in spdm_types.h for completeness but intentionally unimplemented.

References

• DMTF DSP0274 1.4.0 — Sec. 10.27 (Large SPDM message transfer), Tables 68 / 101–105
• ERROR(LargeResponse) = error code 0x0F; CHUNK_GET = 0x86, CHUNK_RESPONSE = 0x06; CHUNK_CAP = 0x00020000