Skip to content
Chattrapat Sangmanee edited this page Sep 15, 2026 · 5 revisions

What is LITE mode

When LITE pin is active, it will temporary patch the console to qCFW via diff file to allow loading of Cobra payload from USB.

This payload will bypass update loop on NoBD/NoBT consoles.

If you're already on qCFW, this pin will just load cobra from USB.

However, it only worked when Stagex is already installed to flash and base firmware is 4.93 CEX

This means hardware flasher is required for first installation.

Hardware flashing

Download qcfw zip, then write following files into flash at these offset:

NOR

  • Stagex.bin = 0xF21000
  • Stagex_aux.bin = 0xF30000
  • CoreOS.bin = 0x0C0000 and 0x7C0000

eMMC

  • Stagex.bin = 0xA1000
  • Stagex_aux.bin = 0xB0000
  • CoreOS.bin = 0x0C0020 and 0x7C0010

Then apply syscon command from qcfw_sc_eeprom.txt

How-to

  1. Copy stage2.cex from <qcfw_zip>/qcfw/dev_flash/sys/ to ROOT of your USB drive
  2. Plug it into RIGHTMOST port of your console
  3. Short LITE pin on modchip to ground
  4. Turn on your console, you should hear lot of beeps before updater start. It should bypass update error by now.
  5. Unshort LITE pin after finished install, or HEN won't work

From now on, always install 4.93 HFW! otherwise you must redo hardware flashing again.

Modchip must be power cycled to apply config pin.

Clone this wiki locally