Arduino_USBHostMbed5 Public doesn't work

[zuorma]

I've bought Arduino GIGA R1 and tried to use USB A, I've inserted 32GB Flash Drive into USB-A port of Arduino GIGA R1, before inserting Flash drive I've converted Flash Drive to MBR partitioning scheme and formatted Flash drive as FAT32, then I've inserted this Flash drive into Arduino GIGA R1 USB-A port, I used your example of Read and I see this error code: No such device (-19).
So your library can recognize my Flash drive, can mount my Flash drive, but your library can not read my Flash drive with FAT32 MBR.

[per1234]

Hi @zuorma. This is the repository for the "Arduino_Braccio_plusplus" library, for use with the Arduino Braccio++ robotic arm.

Your report doesn't appear to have anything to do with the code hosted in this repository and the Braccio++ doesn't use the GIGA R1 WiFi board. So I will close the issue as off topic.

You are welcome to request assistance with the problem on Arduino Forum, where we have a dedicated category for discussions related to the GIGA R1 WiFi:

https://forum.arduino.cc/c/official-hardware/mega/giga-r1-wifi/182