Update IoT Cloud naming

Author: karlsoderby

content/arduino-cloud/01.guides/04.micropython/content.md

@@ -25,7 +25,7 @@ The goals of this tutorial are:
 
 - Connect your Arduino device to your Wi-Fi® network.
 - Connect your Arduino device to the Arduino Cloud via MicroPython.
-- Control an LED using the Arduino IoT Cloud.
+- Control an LED using the Arduino Cloud.
 
 ## Hardware & Software Needed
 
@@ -109,7 +109,7 @@ This file should be copied over to the flash drive that mounts when MicroPython
 
 ### Install Cloud Library
 
-To install the Arduino IoT Cloud (Micro)Python library on your board, you can use the Python based tool `mpremote`. This requires Python to be installed. On macOS and Linux Python usually comes pre-installed. If it's not installed on your system you may download it from [here](https://www.python.org/downloads/). Then, to install `mpremote` you can use pip:
+To install the Arduino Cloud (Micro)Python library on your board, you can use the Python based tool `mpremote`. This requires Python to be installed. On macOS and Linux Python usually comes pre-installed. If it's not installed on your system you may download it from [here](https://www.python.org/downloads/). Then, to install `mpremote` you can use pip:
 
 ```bash
 $ pip install mpremote
@@ -218,8 +218,8 @@ If the code is not working, there are some common issues we can troubleshoot:
 
 - Make sure MicroPython >= 1.2 is installed on your board.
 - Check the Wi-Fi® credentials in the `secrets.py` file.
-- Ensure the device ID and Cloud password in the `secrets.py` file match with what is registered on the IoT Cloud.
-- Make sure your IoT Cloud Thing is correctly set up and your device is assigned to it.
+- Ensure the device ID and Cloud password in the `secrets.py` file match with what is registered on the Arduino Cloud.
+- Make sure your Arduino Cloud Thing is correctly set up and your device is assigned to it.
 
 ## Conclusion
 

content/arduino-cloud/01.guides/07.node-red/nodered-intro.md

@@ -3,7 +3,7 @@ title: 'Node-RED'
 description: 'Learn how to use Node-RED together with the Arduino Cloud.'
 tags:
   - Node-RED
-  - IoT Cloud
+  - Arduino Cloud
   - Automation
   - IoT
 author: 'Liam Aljundi'
@@ -33,7 +33,7 @@ In this tutorial, we will look into the applications of using Node-RED together
 
 For this tutorial, you will need a cloud compatible board. You will find all compatible boards in the link below:
 
-- [Arduino Cloud compatible hardware.](/cloud/iot-cloud/tutorials/iot-cloud-getting-started#compatible-hardware)
+- [Arduino Cloud compatible hardware.](/arduino-cloud/hardware/devices#type-of-devices)
 
 
 ## Node-RED Setup
@@ -121,7 +121,7 @@ In addition to the default nodes installed in node-RED, you can use the palette
 
 ![Installing the Arduino Cloud Palette](assets/nodered-03.gif)
 
-Now, you should be able to use the Arduino Cloud nodes from the palette on the left side of the editor. There are five IoT Cloud nodes: property in, property out, historic, periodic, and inject. Each of the nodes has a description of its function, which appears when you hover over the node.
+Now, you should be able to use the Arduino Cloud nodes from the palette on the left side of the editor. There are five Arduino Cloud nodes: property in, property out, historic, periodic, and inject. Each of the nodes has a description of its function, which appears when you hover over the node.
 
 ## Setting Up a Thing
 
@@ -173,7 +173,7 @@ Follow the steps below to set up the Thing:
 
 ### Circuit
 
-The final step is connecting the **DHT11 humidity sensor** to our Arduino MKR Wi-Fi 1010 board, as shown in the image below. You can also freely use any other [IoT Cloud compatible board](/cloud/iot-cloud/tutorials/iot-cloud-getting-started#compatible-hardware) and a different sensor.
+The final step is connecting the **DHT11 humidity sensor** to our Arduino MKR Wi-Fi 1010 board, as shown in the image below. You can also freely use any other [Arduino Cloud compatible board](/arduino-cloud/hardware/devices#type-of-devices) and a different sensor.
 
 ![Connecting the DHT11 Sensor.](assets/rednode-09.png)
 

content/arduino-cloud/01.guides/08.alexa/alexa.md

@@ -17,7 +17,7 @@ In this tutorial you will learn how to integrate the [Arduino Cloud](app.arduino
 
 This tutorial focuses on using the [MKR RGB Shield](https://store.arduino.cc/products/arduino-mkr-rgb-shield) but can easily be modified to use any other RGB pixels / matrices.
 
-***You can also find all variables that can be synchronized between Arduino Cloud and Alexa in the [IoT Cloud Variables guide](/arduino-cloud/getting-started/cloud-variables#alexa-variables).***
+***You can also find all variables that can be synchronized between Arduino Cloud and Alexa in the [Cloud Variables guide](/arduino-cloud/getting-started/cloud-variables#alexa-variables).***
 
 ## Goals
 
@@ -169,4 +169,4 @@ Did you know that the Arduino Cloud supports over the air uploads? When you've u
 
 ***Over the Air uploads require an Entry plan to the Arduino Cloud***
 
-To use this feature, make sure the board has power. If your board is already connected to the IoT Cloud, you will be able to upload to it over the air. Navigate to the Things sketch tab in the Arduino Cloud interface, and you should see it being discovered just as if it was connected via USB.
+To use this feature, make sure the board has power. If your board is already connected to the Arduino Cloud, you will be able to upload to it over the air. Navigate to the Things sketch tab in the Arduino Cloud interface, and you should see it being discovered just as if it was connected via USB.

content/arduino-cloud/02.hardware/03.lora/lora.md

@@ -5,7 +5,7 @@ tags:
     - LoRa®
     - LoRaWAN®
     - 'The Things Industries'
-    - 'IoT Cloud'
+    - 'Arduino Cloud'
 author: 'Karl Söderby'
 hero_position: 2
 hardware:
@@ -206,7 +206,7 @@ void setup() {
   
   /*
      The following function allows you to obtain more information
-     related to the state of network and IoT Cloud connection and errors
+     related to the state of network and Arduino Cloud connection and errors
      the higher number the more granular information you’ll get.
      The default is 0 (only errors).
      Maximum is 4
@@ -257,7 +257,7 @@ This code will simply increase the `test` variable every 3 minutes, which will s
 
 If you have an Arduino PRO Gateway, you will need to register it, using the [manager for Linux devices](https://app.arduino.cc/devices).
 
-You can visit the [Activate an Arduino Pro Gateway with IoT Cloud](https://support.arduino.cc/hc/en-us/articles/4407770369042-Activate-an-Arduino-Pro-Gateway-with-IoT-Cloud ) article for more details.
+You can visit the [Activate an Arduino Pro Gateway with Arduino Cloud](https://support.arduino.cc/hc/en-us/articles/4407770369042-Activate-an-Arduino-Pro-Gateway-with-IoT-Cloud ) article for more details.
 
 ###  Migrate Existing Gateway
 

content/arduino-cloud/02.hardware/05.cellular/cellular.md

@@ -19,7 +19,7 @@ Connection through mobile networks can be considered in remote areas where there
 
 ***For more information, visit the [Arduino SIM page](https://store.arduino.cc/digital/sim).***
 
-***Note that a secured connection is a memory intense operation, so there's not a lot of memory for the user application (e.g. around 2.6 kB on the MKR GSM 1400). Using a lot of IoT Cloud variables may cause the sketch to run out of memory on boards which don't offload the SSL stack and make it crash.***
+***Note that a secured connection is a memory intense operation, so there's not a lot of memory for the user application (e.g. around 2.6 kB on the MKR GSM 1400). Using a lot of Arduino Cloud variables may cause the sketch to run out of memory on boards which don't offload the SSL stack and make it crash.***
 
 ## Setup
 

content/arduino-cloud/03.cloud-interface/00.sketches/sketches.md

@@ -128,7 +128,7 @@ This section highlights some important aspects of writing code with regard to th
 
 ### Watchdog Timer (WDT)
 
-All IoT Cloud sketches use a **Watchdog Timer (WDT)** by default. The WDT can be used to automatically recover from hardware faults or unrecoverable software errors.
+All Arduino Cloud sketches use a **Watchdog Timer (WDT)** by default. The WDT can be used to automatically recover from hardware faults or unrecoverable software errors.
 
 A WDT is essentially a countdown timer, whereas it starts counting from a set value, and upon reaching zero, it resets the board. To prevent it from reaching zero, we continuously call it from the `loop()`, using the `ArduinoCloud.update()` function.
 
@@ -179,7 +179,7 @@ For a more complex and commented example, you can have a look at the [BlinkWitho
 
 ### I2C Usage
 
-Components connected via I²C (including the sensors onboard the [MKR IoT Carrier](https://store.arduino.cc/products/arduino-mkr-iot-carrier)) uses the same bus as the **ECCX08** crypto chip. As the crypto chip is an essential part of establishing a connection to the IoT Cloud (it contains the credentials), it is important that other I²C peripherals are initialized after the connection has been made.
+Components connected via I²C (including the sensors onboard the [MKR IoT Carrier](https://store.arduino.cc/products/arduino-mkr-iot-carrier)) uses the same bus as the **ECCX08** crypto chip. As the crypto chip is an essential part of establishing a connection to the Arduino Cloud (it contains the credentials), it is important that other I²C peripherals are initialized after the connection has been made.
 
 For example, if you are initializing a library such as [Arduino_MKRENV](https://www.arduino.cc/reference/en/libraries/arduino_mkrenv), your `setup()` should be implemented as:
 
@@ -205,13 +205,13 @@ void setup() {
 
 ### Avoid Blocking Serial Communication
 
-`while(!Serial) {}` loops endlessly until the Serial Monitor is opened. This is a useful practice in cases where you want to see all debug output from the start of the sketch execution. However, when building IoT systems using **`while(!Serial){}` can hinder our project from running autonomously**, stopping the board from connecting to the network and IoT Cloud before manually opening the Serial Monitor. Therefore, it is recommended to consider removing the `while(!Serial){}` loop if it's not necessary.
+`while(!Serial) {}` loops endlessly until the Serial Monitor is opened. This is a useful practice in cases where you want to see all debug output from the start of the sketch execution. However, when building IoT systems using **`while(!Serial){}` can hinder our project from running autonomously**, stopping the board from connecting to the network and Arduino Cloud before manually opening the Serial Monitor. Therefore, it is recommended to consider removing the `while(!Serial){}` loop if it's not necessary.
 
 A common trick is to add a **`delay(1500);` command after `Serial.begin(9600);`**. This will slightly slow down the initialization of your device but will give you some time to open the serial monitor when you're interested in seeing its output without losing the very first lines.
 
 ## Create Agent
 
-The [Arduino Create Agent](https://github.com/arduino/arduino-create-agent) is a single binary that will appear on the menu bar and work in the background. It allows you to use the Arduino IoT Cloud and the Arduino Web Editor to seamlessly upload code to any board directly from the browser.
+The [Arduino Create Agent](https://github.com/arduino/arduino-create-agent) is a single binary that will appear on the menu bar and work in the background. It allows you to use the Arduino Cloud and the Arduino Web Editor to seamlessly upload code to any board directly from the browser.
 
 Downloading and installing the Arduino Create Agent plugin can be done following [this quick and easy process](https://create.arduino.cc/getting-started/plugin/welcome).
 

content/arduino-cloud/03.cloud-interface/02.variables/variables.md

@@ -1,7 +1,7 @@
 ---
-title: 'IoT Cloud Variables'
+title: 'Cloud Variables'
 description: 'Learn how to configure and use variables in your Arduino Cloud sketches.'
-tags: [IoT Cloud, Variables]
+tags: [Arduino Cloud, Variables]
 author: 'Karl Söderby'
 difficulty: beginner
 ---

content/arduino-cloud/03.cloud-interface/03.dashboard-widgets/dashboard-widgets.md

@@ -1,7 +1,7 @@
 ---
 title: 'Dashboards & Widgets'
 description: 'Learn about dashboards and the different widgets that can be used to monitor & control your board.'
-tags: [IoT Cloud, Widgets, Dashboards]
+tags: [Arduino Cloud, Widgets, Dashboards]
 author: 'Karl Söderby'
 difficulty: beginner
 ---

content/arduino-cloud/03.cloud-interface/04.triggers/triggers.md

@@ -2,19 +2,19 @@
 title: Triggers
 description: Learn how to use triggers that allow you to send notifications based on set conditions.
 author: Hannes Siebeneicher
-tags: [IoT Cloud, Triggers, Cloud Notification]
+tags: [Arduino Cloud, Triggers, Cloud Notification]
 ---
 
-Triggers react to certain conditions inside your IoT Cloud Thing, such as a boolean being true, or a string being assigned a value. As soon as a set condition is met a notification gets triggered and sent to you. This is useful when you monitor data and you need to know about any change as soon as it happens. This could be anything from different values in environmental monitoring or security-related information such as movement detection.
+Triggers react to certain conditions inside your Arduino Cloud Thing, such as a boolean being true, or a string being assigned a value. As soon as a set condition is met a notification gets triggered and sent to you. This is useful when you monitor data and you need to know about any change as soon as it happens. This could be anything from different values in environmental monitoring or security-related information such as movement detection.
 
 Triggers can be set up for any of your existing projects, and are found in the [cloud home section](https://cloud.arduino.cc/home/).
 
 ## Hardware & Software Needed
 
 - [Arduino Cloud](app.arduino.cc) (Maker plan).
-- Cloud-compatible boards, [see full list](https://docs.arduino.cc/arduino-cloud/getting-started/iot-cloud-getting-started#compatible-hardware).
+- Cloud-compatible boards, [see full list](https://docs.arduino.cc/arduino-cloud/guides/overview#compatible-hardware).
 
-***In this tutorial, we use the [Nano 33 IoT](https://store.arduino.cc/products/arduino-nano-33-iot). This is not a requirement, you can use any IoT Cloud-compatible board for this tutorial.***
+***In this tutorial, we use the [Nano 33 IoT](https://store.arduino.cc/products/arduino-nano-33-iot). This is not a requirement, you can use any Arduino Cloud-compatible board for this tutorial.***
 
 ## Setup & Configuration
 
@@ -87,7 +87,7 @@ void setup() {
   
   /*
      The following function allows you to obtain more information
-     related to the state of network and IoT Cloud connection and errors
+     related to the state of network and Arduino Cloud connection and errors
      the higher number the more granular information you’ll get.
      The default is 0 (only errors).
      Maximum is 4

content/arduino-cloud/05.iot-remote-app/01.getting-started/iot-remote-app.md

@@ -77,4 +77,4 @@ Head over to the [Arduino Cloud - Things](app.arduino.cc/things) and go to the T
 
 ![Synchronizing variables.](assets/remote-app-cloud-variables.png)
 
-Simply described, this allows you to use your phone as an input for a number of different applications. For example, the `Compass` variable can be used to control the angle of a servo motor on another device. You can read more about how to synchronize these variables in the [Use Sensor Data From Your Phone](/arduino-cloud/tutorials/iot-remote-phone-sensors) tutorial, that includes a practical example.
+Simply described, this allows you to use your phone as an input for a number of different applications. For example, the `Compass` variable can be used to control the angle of a servo motor on another device. You can read more about how to synchronize these variables in the [Use Sensor Data From Your Phone](/arduino-cloud/iot-remote-app/iot-remote-phone-sensors) tutorial, that includes a practical example.