Add UNIT Electronics BME68x library - Optimized for UNIT development …

[Cesarbautista10]

Description

Add UNIT Electronics BME68x library - an optimized version of the Bosch BME68x library for UNIT Electronics development boards.

Library Information

• Repository: https://github.com/UNIT-Electronics-MX/unit_bme68x_library
• License: BSD-3-Clause (same as original Bosch library)
• Sensors: BME680, BME688
• Category: Environmental sensors

Compatible Boards

UNIT Electronics Boards:

• UNIT TouchDot S3 (ESP32-S3)
• UNIT Pulsar ESP32-C6
• UNIT DualMCU ONE (ESP32 + RP2040)
• UNIT DualMCU (ESP32 + RP2040)

Other Arduino-compatible boards:

• Arduino Uno/Nano/Mega
• Generic ESP32/ESP32-S3/ESP32-C3/ESP32-C6
• Other Arduino-compatible microcontrollers

Features

• Optimized I2C configurations for UNIT boards
• Auto-detection for UNIT Electronics boards
• Low power consumption examples
• QWIIC connector support
• Complete documentation and examples

Testing

✅ Library tested on all supported UNIT Electronics boards
✅ Compatible with both BME680 and BME688 sensors
✅ Examples verified and working
✅ Documentation complete

[github-actions]

A problem was found with your submission https://github.com/UNIT-Electronics-MX/unit_bme68x_library

❌ ERROR: The repository has no tags. You need to create a release or tag that matches the version value in the library's library.properties file.

[github-actions]

Thanks for your interest in contributing to the Arduino Library Manager index @Cesarbautista10
Please resolve the error(s) mentioned in the previous comment.

After resolving the issue, trigger this check again by doing one of the following:

• Commit the required change to the branch you submitted this pull request from.
• Comment here, mentioning @ArduinoBot in the comment.

❗ NOTE: It is not necessary to open a new pull request. ❗

More information:
https://github.com/arduino/library-registry/blob/main/README.md#if-the-problem-is-with-the-pull-request

[Cesarbautista10]

@ArduinoBot please check again

[github-actions]

Hello! I'm checking your submission again.

[github-actions]

Your submission has now been accepted! Thanks for your contribution to the Arduino Library Manager index.

The library(s) will be available for installation via Library Manager within a day's time.

You can check the logs from the Library Manager indexer for your library(s) here:
http://downloads.arduino.cc/libraries/logs/github.com/UNIT-Electronics-MX/unit_bme68x_library/